VariZoom VZ-SUC Battman 7.2 volt to 12 volt adapter
step up cable for VZ702M/722 batteries from 7.2 to 12 volt
€ 26.14 incl. VAT
in stock
VariZoom VZDBC Dual Battery Charger
Delivering nonstop power throughout your production is of utmost importance. The VZ DBC Dual Battery Charger helps you keep the power flowing, allowing you to simultaneously charge two camcorder batteries at once.
The VZ DBC is compatible with a wide array of Li-ion camcorder battries from Canon, Sony, Panasonic, JVC, Samsung and many other manufacturers.
With the included AC wall adapter and DC car plug, the DBC provides you with the flexibility you need to charge batteries no matter where your shoot takes you.
€ 103.32 incl. VAT
in stock
VariZoom VZ-B144 battery for stabilizer and Monitors
Extra high-capacity Li-Ion battery for GT, Aviator, Aviator-MX and late-model ProLite stabilizers.
€ 133.02 incl. VAT
more then 10 in stock
VariZoom VZEFZRX Lens control Set for Sony PMW-300/200
Compact Sony PMW-300/200/160/EX1/EX3 Control Kit
Pistol grip zoom and electronic focus kit for Sony EX1, EX3, PMW-300/200/160 series cameras.
Includes VZROCKEXD, VZEFCU, VZDVRODS
€ 1056.77 incl. VAT
Available soon - please send request for reservation
VariZoom VZEFZPGX Lens control Set for Sony PMW-300/200
Compact Sony PMW-300/200/160/EX1/EX3 Control Kit
Pistol grip zoom and electronic focus kit for Sony EX1, EX3, PMW-300/200/160 series cameras.
Includes VZPGEX, VZEFC2U, VZDVRODS
€ 1436.62 incl. VAT
Available soon - please send request for reservation
VariZoom VZFGBC Focus Gear Box Canon
Focus Gear Box for Canon broadcast lenses
You can use this gear box only together VariZoom steel cable driven Focus controllers !
€ 360.80 incl. VAT
must be ordered - not in stock
VariZoom VZSROCKF - remote control Set for Fujinon lenses
Hinterkamerabedienung Set VariZoom VZSROCKF for most Fujinon 8-pin lenses for zoom and Schärfesteuerung.
Set consisting of:
• VariZoom VZROCKF - 8-pin connector for zoom control
• VariZoom VZFCF - sharpening control by steel shaft and bevel gear
€ 689.28 incl. VAT
Available soon - please send request for reservation
VariZoom VZUSPG-EXHD Lens Remote HD Monitor Kit
Hinterkamerabedienung Set VariZoom VZUSPG-EXHD for SonyPMW-300/200/160 / EX1 / EX3 standard lenses for control of sharpness and zoom. The sharpness is controlled by steel shaft, zoom via 8-pin cable. Here in a set with HD monitor kit.
Set consisting of:
• VariZoom VZPGEX - Zoom control with 8-pin cable
• VariZoom VZFCU - sharpening control with steel shaft and angular gear
• VariZoom VZDVRODS - Rod system for mounting the focus control
• VariZoom VZM7K - HD monitor set with composite connection
VZPGEX, VZFCU, VZDVRODS, VZM7K
€ 1592.05 incl. VAT
Available soon - please send request for reservation
VariZoom VZFGBX focus Block for Canon 16x lenses
Focus Block for Canon 16x XL Series Manual Lenses
To use with VariZoom Focus remote controller steel cable and grip unit.
€ 261.09 incl. VAT
in stock
VariZoom VZEFCU-ADAPTER mount adapter VZEFC to Rod System
Universal Rod-Mount Focus/Iris Bracket Only for use with EFC
€ 138.02 incl. VAT
must be ordered - not in stock
VariZoom VZUSROCKZFIHD control and monitor kit Panasonic
€ 742.39 incl. VAT
Available soon - please send request for reservation
VariZoom VZSROCKC - Remote Control Set Canon Pro lenses
Hinterkamerabedienung Set VariZoom VZSROCKS for Canon Pro lenses for controlling zoom and sharpness.
Set consisting of VariZoom VZROCKC + VariZoom VZFCC.
The sharpness is controlled by a steel shaft, the zoom by an 8-pin cable.
€ 689.28 incl. VAT
Available soon - please send request for reservation
VariZoom VZSPROC remote Control Set Canon Pro lenses
Pro Zoom and Focus Kit for Canon Lenses = VZPROC + VZFCC
€ 795.49 incl. VAT
Available soon - please send request for reservation
VariZoom VZSPROF remote control Kit Fujinon lenses
Pro Zoom and Focus Kit for Most Fujinon 8-pin Lenses = VZ-PRO-F + VZ-FCF
The VZSPROF zoom and focus control kit offers a 2-handle studio-style control setup for cameras with Fujinon lenses. The VZPROF dual-speed zoom unit provides smooth and precise control over zoom and the VZFCF manual focus unit turns the focus ring using a gearbox attached to a rotating handle for a tactile-level control of focus. Save money with this kit and improve your camera package immediately.
VZSPROF Fujinon Zoom Focus Control Kit
VZFCF + VZPROF
Precisely adjust zoom and focus on your Fujinon lens from the tripod handle using this studio-style remote. A hefty aluminum rotating grip drives the custom-machined focus gearbox using an industrial wound-core cable, allowing smooth control of the focus ring. Pair with any Fujinon zoom control for savings.
Save by purchasing the VZPROF and VZFCF together.
€ 795.49 incl. VAT
Available soon - please send request for reservation
VariZoom VZFGBF Gear Box for Fujinon lenses
Fujinon 1/2 inch or 2/3 inch Lens Focus Gear Box - to use with VariZoom steel control cable and remote grip.
€ 360.80 incl. VAT
in stock
VariZoom VZFGB22 focus Gear box Small Fujinon lens
Small Fujinon Focus Gear Box - fits to most 1/3 inch Fujinon lenses ....
You can use this gear box only together VariZoom steel cable driven Focus controllers !
€ 261.09 incl. VAT
in stock
VariZoom VZ-FC-BRACKET-KIT mount EFC-U to Pro lenses
Mount for VariZoom EFC-U or EFC elektronic to mount directly to Fujinon or Canonpro lens
Delivery incl. screw to mount to the lens
€ 190.95 incl. VAT
in stock
VariZoom VZDGS DSLR clamp on gear Set 60-100mm
DSLR clamp-on gear set film pitch (32DP/0.8m) - 3 sizes to fit approx 60-90mm max diameter lenses
€ 126.06 incl. VAT
in stock
VariZoom VZEFCU-G32.8 for EFC-U and EFC controls
EFC-U Gear 32DP / 0.8M (Film Pitch)
€ 31.24 incl. VAT
in stock
VariZoom VZDGU - Universal clamp on Gear 32DP
This clamp-on gear adapter attaches to the focus ring on Sony PMW-300, , -EX1, and -EX3 and other lenses to allow the focus ring to be driven by external gearboxes and motors like the VariZoom TOC or EFC series. The ring has a gear pitch of 0.6m (Fujinon).
€ 52.04 incl. VAT
only 2 stock
VariZoom VZRF100 Remote Control Fujinon
Compact Fujinon Zoom Control - 8-pin
Our most affordable control for 8-pin Fujinon professional lenses. The pressure-sensitive rocker allows fine control over zoom speed, while the record and return buttons allow you to remotely trigger the camera and review recorded material.
The VZRF100 is our basic 8-pin Fujinon zoom control. With its high-sensitivity rocker, precise repeatable zooms are easily achieved. Perfect for tripods, stabilizers and shoulder supports.
Pressure-sensitive zoom rocker
Low profile record/pause button
Video return button plays back the last 5 seconds of recorded material
Rubber lined clamp for easy tightening
on request
VariZoom VZPG-PZ remote control Panasonic
Panasonic Zoom Lens Control VZPG-PZ
This top of the line pistol-grip control for Panasonic camcorders utilizes the finest components and has a beautifully machined aluminum housing and articulated clamp. The professional variable rocker offers precise control of zoom speed, and the grip design allows left- or right-handed operation. VariZoom is proud to offer the first professional pistol-grip zoom control for Panasonic HVX/HPX/HMC/DVX/DVC camcorders.
The VZ-PG-PZ provides remote zoom control for compatible Panasonic camcorders and it will clamp to any tripod handle, jib, or support bar. The PG-PZ features precise control of zoom speed, comfortable grip, heavy-duty aluminum housing, and articulated swivel clamp. Pair with a VZ-PFI focus/iris controller for studio-style two handle operation or if you need someone pulling focus/iris separately - order as a kit and save!
• Pressure-sensitive zoom rocker provides precise zoom speed control
• Red record/pause button
• Rubber-foam grip with a pistol grip curve for ergonomic comfort
• Designed for use with left or right hand
• Heavy-duty, quick-release aluminum swivel clamp for angular adjustment of handle position
• Compact, heavy-duty black aluminum housing
€ 317.56 incl. VAT
must be ordered - not in stock
VariZoom replacement cable for all Sony EX controls
Replacement cable for all VariZoom EX controllers
Length about 120cm
8-Pole
with molded SONY EX plug on open cable ends
€ 35.00 incl. VAT
only 2 stock
VariZoom VZPROC Lens control Canon Pro Zoom
Pro Style Canon Zoom Control - 8-pin
€ 370.66 incl. VAT
must be ordered - not in stock
VariZoom VZFCX remote control Canon manual lens XL1
Professional Cable Drive Focus Control for XL1 / XL2 16X Manual Lens
Heavy-duty focus handle with articulated swivel clamp for angular position adjustment
High-precision gear box fits on the Canon 16X XL Manual lens for XL1/XL1s/XL2 models
40? industrial drive cable accommodates any tripod configuration and provides smooth manual control
Handle and cable are also compatible with other VariZoom gear boxes - buy one complete FC-X focus control set, then just buy the VZ gear box for your Fujinon or Canon pro lens for savings
€ 371.67 incl. VAT
in stock
VZ-EFZ-PGC zoom and electronic focus control for Canon lens
Designed for use on jibs or other remote applications, this zoom + programmable remote focus control for Canon and Fujinon allows the user to adjust focus (or iris) manually or preset up to 5 quick-change positions.
KIT: VZEFC2 and VZPGC
€ 1010.31 incl. VAT
Available soon - please send request for reservation
VZ-EFZ-PGF zoom and electronic focus control for Fujinon
Designed for use on jibs or other remote applications, this zoom + programmable remote focus control for Canon and Fujinon allows the user to adjust focus (or iris) manually or preset up to 5 quick-change positions.
KIT: VZEFC2 and VZPGF
€ 1010.31 incl. VAT
Available soon - please send request for reservation
VariZoom VZUSPG-PZFIHD lens remote monitor set panasonic
Hinterkamerabedienung Set VariZoom VZUSPG-PZFIHD to control the zoom, sharpness and aperture of Panasonic cameras including 7 inch HD monitor set.
Set consisting of:
• VariZoom VZPG-PZ for controlling the zoom
• VariZoom VZPFI for control of sharpness and aperture
• VariZoom VZM7K monitor set for direct image control -> leider nicht mehr lieferbar
Also for the AG-DVX200, Panasonic HC-X1, AJ-PX230, AJ-PX270 and many others ...
on request
VariZoom VZSPROF2 remote Control Set Fujinon small
Pro Zoom and Focus Kit for Small Fujinon 8-pin Lenses = VZPROF + VZFCF22
VZSPROF2 Zoom Focus Control Kit
VZPROF
The heavy-duty aluminum housing, dual-variable speed control, and affordable price make this our most popular zoom control for Fujinon 8-pin lenses. The dual-variable circuit allows for the finest degree of zoom control. Pair with any Fujinon focus control for savings.
VZFCF22
Precisely adjust focus on your Fujinon lens from the tripod handle using this studio-style remote. A hefty aluminum rotating grip drives the custom-machined focus gearbox using an industrial wound-core cable, allowing smooth control of the focus ring. Pair with any Fujinon zoom control for savings.
Save by purchasing the VZPROF and VZFCF22 together.
€ 636.19 incl. VAT
in stock
Varizoom HZ-HM800VZRKIT remote control JVC 800 Series
this unique studio-style 2-handle zoom/focus/iris control makes full use of the autofocus kit lens included with GY-890U and GY-850U cameras. On one handle is the dual-variable analog zoom control w/ record and push-autofocus, while on the other handle is a completely unique remote electronic focus/iris control designed solely for use with 800-series cameras equipped with the 20x autofocus lens . The variable-speed focus unit offers precise manual control with a large, smoothly-rotating dial, in addition to manual iris control and toggle buttons for switching back and forth between auto and manual control for both iris and focus. The analog zoom remote incorporates our patented variable rocker + trigger speed dial for smooth ramping or max speed preset. Both remotes can be extended over 100' with optional extension cables.
Lens control for JVC GY-HM890U, GY-HM850U
• 2-handle studio control for Zoom/Focus/Iris
• Dual-variable zoom control
• Record start/stop
• Push autofocus
• Variable-speed remote electronic focus control
• Auto/Manual toggles for focus and iris
• Manual Iris Control
• Onscreen Data Toggle
This kit cannot be used with Fujinon's XT20sx47BRM or the XT17sx45BRMK3 lenses.
on request
VariZoom VZSPG-PZFI lens remote control Set Panasonic
Pistol Grip Zoom & Focus/Iris Kit for Panasonic = VZPGPZ + VZPFI
The VZSPG-PZFI Combo kit comes with the Pistol Grip Zoom Control of the VZPGPZ & Focus/Iris Control from the VZPFI giving the user a studio style configuration.
on request
VariZoom VZROCKC100 Focus control Canon C100 + MKII
NOT AVAILABLE ANY LONGER
focus controllerVariZoom VZRockC100 for Canon C100 and C100 MKII. The very compact design of this Hinterkamerabedienung makes this universally applicable.
The universal clamp on the back allows the zoom control to be easily mounted on tripods, crane systems or shoulder rests.
The VZROCKC100 comes with 1 meter cable. Extension cables are available here. Take a look at the matching items in our shop.
features:
• Focus via large, pressure-sensitive rocker
• Aperture F and F +
• Recording start / stop
• Recording control LED
• Autofocus ON / OFF
This is the only controller of its kind for the Canon C100. You can control focus precisely with our custom variable-speed rocker and also start/stop record, power the camera on/off, control iris up/down, and 'push auto iris.' Whether you need to make very fine focal adjustments or quickly shift from near to far, the variable speed control smoothly adjusts the focus without any chatter or jumpy response.
Also work with Blackmagic Design BMCC !
on request
VariZoom VZFC-U remote control focus Sony EX and PMW
Our FC-U manual focus system allows you to pull focus on your Sony PMW-300/200/160/EX1/EX3 from the tripod handle. The FC-U consists of a rotating control handle, drive cable, and bracket-mounted gearbox for driving the clamp-on focus ring that attaches to the EX1/EX3 lens. The gearbox bracket attaches to any 15mm/19mm rods. *Rods required for assembly/operation
The FC-U provides smooth manual focus control of your Sony PMW-300/200/160/EX1/EX3 from the tripod handle. Similar to our pro rear focus controls, the FC-U adds a clamp-on EX gear adapter and a bracket-mounted gearbox that fits on most rod systems (15/19mm).
FCU requires Rod Support System (15/19mm). If you do not have a rod system, see VariZoom's DV Rods System: a high-quality rods system for DV/HDV cameras which enables you to attach matteboxes, focus control systems, wireless adapters, and other accessories (Sold Separately).
€ 593.81 incl. VAT
must be ordered - not in stock
VariZoom VZPROF Lens Zoom Control Fujinon Zoom
The VZProF provides remote zoom control for most Fujinon professional video lenses and it will clamp to any tripod handle, jib, or support bar. The Pro F features a dual-variable system for versatile, precise control of zoom speed. Set the maximum desired speed on the dial (located in a 'trigger' position), then use the pressure-sensitive rocker to vary the speed from a crawl all the way up to the preset max. Alternatively, depress the rocker fully and roll the dial with your index finger to ramp the speed up.
• NEW Professional Black Finish
• NEW Improved Clamping Hardware
• Combination of pressure-sensitive zoom rocker and speed dial provides precise dual-variable zoom control
• Speed dial acts as a limiter for max speed or a 'ramping' device
• Large, safely-located record/pause button
• Video return button plays back the last 5 seconds of recorded material and cues the tape up to the last recorded frame to ensure proper time code sync
• Rubber-foam grip for comfort
• Heavy-duty aluminum housing and quick-release clamp
€ 355.81 incl. VAT
only 2 stock
VariZoom VZROCKC Lens control Canon Pro Zoom
Compact Canon Zoom Control - 8-pin
€ 296.31 incl. VAT
in stock
VariZoom VZROCKDVX remote control Panasonic
Compact Rocker Zoom Ctrl for Panasonic Cameras w/ 2.5mm Zoom Jack
€ 236.81 incl. VAT
in stock
VariZoom VZRL100 LANC remote control
Zoom control for Sony / Canon LANC Remote
• Controls Zoom
• Wide-sweep variable rocker
• Record control
• LED indicator
€ 141.61 incl. VAT
more then 10 in stock
VariZoom VZSTEALTH Camera Remote Control Lanc Sony Canon
The VZ-Stealth LANC Controller
A stylish, lightweight body houses our improved, second-generation proprietary electronics. The pressure-sensitive 'throttle' control allows you to ease into zooms in either direction, hold a steady speed, or instantly accelerate into a 'crash' zoom. The Stealth is completely intuitive and smooth, requiring no setup, power, or operator skill. This unique miniature control offers unmatched convenience, value, and performance.
• Throttle provides variable-speed zoom control
• Dedicated rocker style focus button
• Low profile record/pause button
• Power On/Off button for toggling camera into or out of standby mode
• LED light indicates recording, low battery power, and tape end
€ 117.81 incl. VAT
only 2 stock
VariZoom VZ-STEALTH-LX Remote control Lanc Sony canon
The VariZoom VZSTEALTHLX is out most compact LANC Remote Control.
Easy to use and offering the complete range of LANC features, the Stealth-LX shares the compact, versatile design of the Stealth, but with 3 extra features: Autofocus On/Off, Data On/Off, and Tape Search.
The LX version of the Stealth has 3 additional features: Data, Autofocus, Tape Search. A stylish, lightweight body houses our improved, second-generation proprietary electronics. The pressure-sensitive 'throttle' control allows you to ease into zooms in either direction, hold a steady speed, or instantly accelerate into a 'crash' zoom. The Stealth is completely intuitive and smooth, requiring no setup, power, or operator skill. This unique miniature control offers unmatched convenience, value, and performance.
• Throttle provides variable-speed zoom control
• Dedicated rocker style focus button
• Low profile record/pause button
• Power On/Off button for toggling camera into or out of standby mode
• Switch between auto and manual focus with the A button
• Toggle onscreen information (tape time, settings) on and off with 'Data' button
• Review taped footage with F+ & F- (edit search)
• LED light indicates recording, low battery power, and tape end
€ 165.41 incl. VAT
must be ordered - not in stock
Varizoom VZROCK-J600 HZ-HM600VZR Remote Control JVC LANC
Zoom, Focus for JVC HM-600/650 camcorders
Very compact, Rocker-Style Zom Control.
All controls: Zoom, focus and IRIS !!!!
Lens control for JVC GY-HM600, -HM650 and all JVC 2.5mm remote (LANC) cameras.
Controls Zoom/Focus/Iris
Side-to-side zoom rocker
Wide-sweep variable rocker
Iris Auto/Manual button
Adjust Iris Manually
Switch focus between auto and manual
Adjust Focus Manually
Warranty: 2 years parts/labor
The HZ-HM600VZR is a remote lens control specifically calibrated for the GY-HM170U, GY-HM200U, GY-LS300CHU**, GY-HM600U, GY-HM650U, GY-HM850U** and GY-HM890U** Cameras.
Lens control with the GY-LS300CHU, GY-HM850U and GY-HM890U cameras depends on the lens being used. Some functions may not be controllable.
€ 355.81 incl. VAT
more then 10 in stock
VariZoom VZSTEALTHDVX Panasonic Camera Remote Control
Miniature Joystick Zoom Control for Panasonic Cameras w/ 2.5mm Zoom Jack
Panasonic Zoom Lens Control
Specifically designed for Panasonic cameras, the affordable and versatile Stealth VZSTEALTHDVX has a unique variable-speed throttle for controlling zooms from the slowest crawl up to the fastest. Works on all camera supports, stabilizers, tripods, & jibs.
• Controls Zoom
• Variable-speed zoom throttle
• Smooth crawls from slowest to fastest speeds
• Record start/stop
€ 117.81 incl. VAT
must be ordered - not in stock
VariZoom VZPFI remote control Panasonic
Panasonic Focus & Iris Lens Control
Specifically designed for Panasonic cameras, the affordable and versatile VZPFI offers precision focus and iris control. Operator may switch between auto and manual at anytime. Works on all camera supports, stabilizers, tripods, & jibs.
• Controls Focus/Iris
• Switch between auto and manual
• Independent focus/iris knobs
• S mooth and quiet precision knobs
• Warranty: 2 years parts/labor
€ 178.44 incl. VAT
in stock
VariZoom VZSTEALTHPZFI remote control Panasonic
Specifically designed for Panasonic HVX200, DVX100B, and HPX170, this is the first and only zoom, focus, and iris control. This powerful unit combines the rich feature set of our PZFI controllers with the unique variable-speed throttle of the Stealth series. Operator may switch between auto and manual control for focus and iris at any time. Works on all camera supports, stabilizers, tripods, & jibs.
Controls Zoom / Focus / Iris
Designed for Panasonic HVX200, DVX100B, and HPX170
Variable-speed zoom controller
Record start/stop
Dual-knob Focus and Iris
€ 236.81 incl. VAT
only 2 stock
VariZoom VZROCKPZFI remote lens control Panasonic
Compact Rocker Zoom/Focus/Iris Ctrl for Panasonic Cameras w/ 2.5mm Zoom & 3.5mm Focus/Iris Jack
Panasonic Zoom, Focus & Iris Lens Control
Specifically designed for Panasonic cameras, this is the first and only zoom, focus, and iris control. This powerful combination offers precise control over these three camera functions. Operator may switch between auto and manual control for focus and iris at anytime. Works on all camera supports, stabilizers, tripods, & jibs.
• Controls Zoom / Focus / Iris
• Switches between manual and automatic control for focus and iris
• Pressure-sensitive side-to-side rocker
Note: This is not a LANC control device.
The RockZFI utilizes a pressure-sensitive, side-to-side rocker switch like broadcast zoom controls. This rocker has a greater range of motion for a finer degree of zoom control than the throttle style zoom controls. Adjust iris or focus using smooth and quiet knobs that provide easy operation while you compose your shots. Independent focus/iris knobs allow two people to operate together for critical focus during moving shots or crane moves - imagine the possibilities! The manual/auto switches lock into position, letting you watch the picture, not your hands.
• Wide-sweep variable rocker for smooth, sustainable zooms
• Low profile record/pause button
• Unique dual knob adjustment
• Position switches for manual/auto modes
€ 356.94 incl. VAT
more then 10 in stock
VariZoom VZSROCK-ZFI lens remote SET for Panasonic
Compact Zoom & Focus/Iris Kit for Panasonic = VZROCKDVX + VZPFI
VZROCKDVX:
The RockDVX utilizes a pressure-sensitive, side-to-side rocker switch like broadcast zoom controls. This rocker has a greater range of motion for a finer degree of zoom control than the StealthDVX.
• Wide-sweep variable rocker for smooth, sustainable zooms
• Low profile record/pause button
VZPFI:
A stylish, lightweight body houses our unique dual knob adjustment system, which allows you to ease into proper focus and exposure in either direction. Independent focus/iris knobs allow for two people to operate together for critical focus during moving shots or crane moves-imagine the possibilities! The manual/auto switches lock into position, letting you watch the picture, not your hands. The VZ-PFI is completely intuitive and smooth, requiring no setup, power, or operator skill. This unique miniature control is a perfect compliment to a RockDVX or StealthDVX Zoom Controller.
• Smooth and quiet knobs provide ultra-fine adjustment
• Locking Position switches ensure confidence in manual/auto mode selection
€ 415.31 incl. VAT
in stock
VariZoom VZFCF22 Lens control Fujinon focus
Professional Cable Drive Focus Control for small Fujinon Lenses ***
€ 474.81 incl. VAT
in stock
VariZoom VZFC350K Focus remote Sony Pro PMW
Rear camera operation VariZoom VZFC350K for manual focus control of the PWM-350K and Sony PMW-320K - the only manual focus control on the market for the standard lenses XA16x8 & XS16x5.8 of the Sony models 350K & 320K.
With the VZFC350K you can conveniently control your Sony PMW320 / Sony PWM350 box optics from the tripod grip. An optic-mounted bevel gearbox, insulated steel shaft, and the optimal handle give you the edge you need.
Optionally, in combination suitably, the zoom controls VariZoom VZPROF, VariZoom VZROCKF or VZPGF.
Here are also complete packages including rod system and zoom control available.
This back camera operation is a must for all professionals.
€ 593.81 incl. VAT
in stock
VariZoom VZROCKF remote zoom control Fujinon
Mini Fujinon 8-pin Zoom Controller
€ 296.31 incl. VAT
in stock
VariZoom VZPGC Lens control Canon Pro Zoom
The VZ-PG-C provides remote zoom control for most Canon professional video lenses and it will clamp to any tripod handle, jib, or support bar with a unique offset swivel clamp for adjusting the angle of operation. The pistol-grip design allows left- or righ-handed operation. The PG-C features a dual-variable system for versatile, precise control of zoom speed. Set the maximum desired speed on the dial (located in a 'trigger' position), then use the pressure-sensitive rocker to vary the speed from a crawl all the way up to the preset max. Alternatively, depress the rocker fully and roll the dial with your index finger to ramp the speed up.
• Combination of pressure-sensitive zoom rocker and speed dial provides precise dual-variable zoom control
• Speed dial acts as a limiter for max speed or a 'ramping' device
• Red record/pause button
• Video return button plays back the last 5 seconds of recorded material and cues the tape up to the last recorded frame to ensure proper time code sync
• Rubber-foam grip with a curve for ergonomic comfort
• Designed for use with left or right hand
• Heavy-duty, quick-release aluminum swivel clamp for angular adjustment of handle position
• Compact, heavy-duty black aluminum housing
€ 534.31 incl. VAT
in stock
VariZoom VZPGC20 Lens control Canon CN-E 18-80mm
The VZPG-C20 pistol-grip zoom control for the Canon CN-E 18-80mm and CN-E 70mm servo lenses provides remote zoom, record and One-Shot Autofocus, along with a unique offset swivel clamp for adjusting the angle of operation. The pistol-grip design allows left- or right-handed operation. The PG-C20 features a dual-variable system for versatile, precise control of zoom speed. Set the maximum desired speed on the dial (located in a trigger position), then use the pressure-sensitive rocker to vary the speed from a crawl all the way up to the preset max. Alternatively, depress the rocker fully and roll the dial with your index finger to ramp the speed up.
Combination of pressure-sensitive zoom rocker and speed dial provides precise dual-variable zoom control
Speed dial acts as a limiter for max speed or a ramping device
Red record/pause button
One-Shot Autofocus button allows you to grab focus quickly
Rubber-foam grip with a pistol grip curve for ergonomic comfort
Designed for use with left or right hand
Heavy-duty, quick-release aluminum swivel clamp for angular adjustment of handle position
Compact, heavy-duty black aluminum housing
€ 589.05 incl. VAT
in stock
VariZoom VZPGF lens zoom control Fujinon
The VZ-PG-F provides remote zoom control for Fujinon 8-pin video lenses and it will clamp to any tripod handle, jib, or support bar with a unique offset articulated swivel clamp for adjusting the angle of operation. The pistol-grip design allows left- or right-handed operation. The PG-F features a dual-variable system for versatile, precise control of zoom speed. Set the maximum desired speed on the dial (located in a 'trigger' position), then use the pressure-sensitive rocker to vary the speed from a crawl all the way up to the preset max. Alternatively, depress the rocker fully and roll the dial with your index finger to ramp the speed up. Combination of pressure-sensitive zoom rocker and speed dial provides precise dual-variable zoom control • Speed dial acts as a limiter for max speed or a 'ramping' device • Red record/pause button • Video return button plays back the last 5 seconds of recorded material and cues the tape up to the last • • • recorded frame to ensure proper timecode sync • Rubber-foam grip with a e2€98pistol gripe2€(TM) curve for ergonomic comfort • Designed for use with left or right hand • Heavy-duty, quick-release aluminum swivel clamp for angular adjustment of handle position • Compact, heavy-duty black aluminum housing
€ 534.31 incl. VAT
in stock
VariZoom VZPRO-PZFI lens remote control for Panasonic camera
Pro Style Zoom/Focus/Iris Ctrl for Panasonic Cameras w/ 2.5mm Zoom & 3.5mm F ocus/Iris Jacks
Robust aluminum housing and heavy-duty precision components
Variable high-sensitivity rocker
Hefty aluminum knobs for focus and iris
Single-hand operation of all functions
Focus while Zooming with a single hand - Focus Knob conveniently located in the 'trigger position', so you can zoom with your thumb while pulling focus with your index finger
on request
VariZoom VZROCK Lanc Lens control
Hinterkamerabedienung VariZoom VZ-ROCK for zoom and sharpness of all LANC remote compatible video cameras such as Canon, Sony and new JVC models.
The compact Hinterkamerabedienung has a large rocker for zoom control. The Schärfezieheinrichtung is realized here via a keypad which is very easy to press and thus does not move the camera unnecessarily.
Additional features such as fast forward, rewind on tape deck, auto focus on / off, information display on / off.
Protocol name: LANC, Control-L, CTRL-L
Among others compatible with:
PXW-FS7M2
PXW-FS7
PXW-FS7K
PXW-FS5
NEX-FS700RH
NEX-FS700R
NEX-FS700EK
NEX-FS700E
NEX-FS100EK
NEX-FS100E
NEX-FS100P
NEX-FS100PK
PXW-X200
PXW-X180
PXW-X160
PXW-Z150
NEX-EA50M
HXR-NX5R
HXR-NX3 / 1
HXR-NX100
HXR-MC2000E
HXR-MC50E
HXR-MC1500P
HXR-NX3D1E
HXR-NX5E
HXR-NX70E
HXR-NX3 / VG1
HVR-Z5E
HVR-A1E
HVR-HD1000E
HVR-S270E
HVR-Z1E
HVR-V1E
HVR-Z7
DSR-PD170P
DSR-PD175P
PANASONIC AG-CX350
For cameras with micro USB port, the function can not be guaranteed - but is in your guide the following description:
*** Multi / Micro USB Jack -> Supports Micro USB compatible devices. If you use an adapter cable (sold separately), you can also use accessories with an A / V remote control connector. ***
THEN IT WORKS!
These include, for example:
FDR-AX100 / FDR AX100E / HDR-CX900 / HDR-CX900E
To do this, two adapter cables must be purchased:
https://www.cvc.de/sfo/11006/SONY-VMC-AVM1-A-V-R-Adapterkabel.html
https://www.cvc.de/sfo/9030/VariZoom-VZAV-LANC-Adapterkabel-AV-zu-LANC-Stecker.html
or compact
https://www.cvc.de/sfo/11067/FineVideo-LANC-Adapter-auf-Sony-mini-USB-Multi-USB-flach.html
Is the following in the description, then no remote control is possible:
*** Multi / Micro USB Jack -> Supports Micro USB compatible devices. This jack does not support adapter cable VMC-AVM1 (sold separately). You can connect via an A / V remote control connection
do not use any accessories. ***
These include, for example:
FDR-AX40 / AX53 / AX55 / AXP55
€ 272.51 incl. VAT
more then 10 in stock
VariZoom HZ-HM150VZR for JVC 150 control
Controller for JVC CamCorder
One-Hand Access To All Remote Functions
Zoom, Manual Focus, Dual Iris Controls
Manual Record Start / Stop Button
JVC GY-HM70
JVC GY-HM150 & HMQ10
Model type can be J150 or HZ-HM150VZR
on request
VariZoom VZFCC Lens control Canon focus
Precisely adjust focus on your Canon lens from the tripod handle using this studio-style remote. A hefty aluminum rotating grip drives the custom-machined focus gearbox using an industrial wound-core cable, allowing smooth control of the focus ring.
on request
VariZoom VZFCF Lens control Fujinon focus
P recisely adjust focus on your Fujinon lens from the tripod handle using this studio-style remote. A hefty aluminum rotating grip drives the custom-machined focus gearbox using an industrial wound-core cable, allowing smooth control of the focus ring.
on request
VariZoom VZSPGC camera remote KIT Canon Pro
Pistol Grip Zoom and Focus Kit for Canon Lenses = VZPGC + VZFCC
VZPGC
This top of the line pistol-grip control for Canon 8-pin lenses utilizes the finest components and has a beautifully machined aluminum housing and articulated clamp. The dual-variable circuit allows for the finest degree of zoom speed control. Pair with any Canon focus control for savings.
VZFCC
Precisely adjust focus on your Canon lens from the tripod handle using this studio-style remote. A hefty aluminum rotating grip drives the custom-machined focus gearbox using an industrial wound-core cable, allowing smooth control of the focus ring. Pair with any Canon zoom control for savings.
Save by purchasing the VZ-PG-C and VZ-FCC together.
on request
VariZoom VZSPGF remote control Set Fujinon Pro lenses
Save by purchasing the VZ-PG-F and VZ-FCF as a kit
VZPGF
This top of the line pistol-grip control for Fujinon 8-pin lenses utilizes the finest components and has a beautifully machined aluminum housing and articulated clamp. The dual-variable circuit allows for the finest degree of zoom speed control. Pair with any Fujinon focus control for savings.
VZFCF
Precisely adjust focus on your Fujinon lens from the tripod handle using this studio-style remote. A hefty aluminum rotating grip drives the custom-machined focus gearbox using an industrial wound-core cable, allowing smooth control of the focus ring. Pair with any Fujinon zoom control for savings.
on request
VariZoom VZSPGF12 lens control Set Fujinon Pro 12 lenses
Remote Control Set for Zoom and Focus for every 12 Pin Fujinon lens ( chart available on request )
VZPGF12 Zoom controller This top of the line pistol-grip control for Fujinon 12-pin lenses utilizes the finest components and has a beautifully machined aluminum housing and articulated clamp. The dual-variable circuit allows for the finest degree of zoom speed control. Pair with any Fujinon focus control for savings.
VZFCF Focus Controller Precisely adjust focus on your Fujinon lens from the tripod handle using this studio-style remote. A hefty aluminum rotating grip drives the custom-machined focus gearbox using an industrial wound-core cable, allowing smooth control of the focus ring. Pair with any Fujinon zoom control for savings.
Save by purchasing the VZPGF12 and VZFCF together in Set named VZSPGF12
on request
VariZoom VZPGL remote control LANC camera
LANC Zoom Control
Sharing the same electronics as the VZPROL, the VZPGL has a pistol-grip ergonomic design that works equally well left- or right-handed. The curved grip and compact housing enable comfortable operation, especially for those with average-to-small hands .
• Controls Sony / Canon Zoom via LANC
• Record and manual focus buttons
• Pistol grip design
• Ergonomically curved rubber-foam grip for operator comfort
• For all DV camcorders with LANC Jack
€ 355.81 incl. VAT
must be ordered - not in stock
VariZoom VZROCKEX Lens control Sony EX , PMW, PXW-x200 Zoom
Mini variable rocker Zoom Control for Sony PMW-300/200/160/EX1/EX3 Camcorders with 8 PIN Jack
Our most compact and lightweight control for Sony PXW-X200, PMW-300,, -160, -EX1, and -EX3 camcorders. Ideal for use on tripods, jibs, stabilizers, or shoulder supports.
The VZROCKEX Lens Zoom Camera Control is our solution for the videographer who needs a very compact, lightweight zoom control for Sony PXW-X200 , PMW-300 , PMW , PMW -160 , - EX1 , or - EX3 camcorders. With its high-sensitivity rocker, precise, repeatable zooms are easily achieved. The VZ Rock-EX is perfect for stabilizers and jibs.
• Pressure-sensitive zoom rocker provides precise zoom control
• Rubber-lined clamp for no-slip attachment to any bar up to 1.25
• Low profile record/pause button
• Video return button plays back the last 5 seconds of recorded material
€ 147.63 incl. VAT
must be ordered - not in stock
VariZoom VZROCKEXD Lens control Sony EX und PMW Zoom
Mini variable rocker Zoom Control for Sony PMW-300/200/160/EX1/EX3 Camcorders with 8 PIN Jack
Here now incl. the Predialer for minimum Speed
This upgraded version of our most compact and lightweight control for Sony PXW-X200, PMW, -160, -EX1, and -EX3 camcorders allows even finer zoom speed control. The speed dial allows preset maximum zoom speed to complement our sensitive, wide-sweep variable rocker. Ideal for use on tripods, jibs, stabilizers, or shoulder supports.
The Rock-EXD Lens Zoom Camera Control is an upgraded version of the popular Rock-EX that includes a large diameter speed dial for the absolute finest degree of zoom speed control. The speed dial allows the operator to set and mark the maximum desired speed and the feather the variable zoom rocker for delicate and repeatable zooms. Works with Sony PXW-X200, PMW-300, , -160, -EX1, or -EX3 camcorders. With its high-sensitivity rocker, precise, repeatable zooms are easily achieved. The VZ Rock-EX is perfect for tripods, stabilizers, jibs and shoulder supports.
Pressure-sensitive zoom rocker provides precise zoom control
Speed dial w/ marker ring for presetting max zoom speed
Rubber-lined clamp for no-slip attachment to any bar up to 1.25
Low profile record/pause button
Video return button plays back the last 5 seconds of recorded material
€ 211.36 incl. VAT
in stock
VariZoom VZSROCKEXD-R remote Control Set for Sony PMW and EX
Compact Zoom & Focus For Sony PMW-300/200/160/EX1/EX3 = VZROCKEX D + VZFCU + VZDVRODS
This dual-handle zoom and focus kits for Sony PXW-X200, PMW, PMW-300 and EX1 / EX3 type cameras allows remote zoom/record and manual focus control from your tripod handles for broadcast-style control.
The VZSROCKEXD-R Lens Control Kit (Includes the VZROCKEXD, VZFC-U, and VZDVRODS) is an upgraded version of the popular Rock-EX that includes a large diameter speed dial for the absolute finest degree of zoom speed control. The speed dial allows the operator to set and mark the maximum desired speed and the feather the variable zoom rocker for delicate and repeatable zooms. Works with Sony PMW-300, , -EX1, or -EX3 camcorders. With its high-sensitivity rocker, precise, repeatable zooms are easily achieved. The VZ Rock-EX is perfect for tripods, stabilizers, jibs and shoulder supports.
Pressure-sensitive zoom rocker provides precise zoom control
Speed dial w/ marker ring for presetting max zoom speed
Rubber-lined clamp for no-slip attachment to any bar up to 1.25?
Low profile record/pause button
Video return button plays back the last 5 seconds of recorded material
VariZoom is the world s largest manufacturer of lens controls with the widest variety of controls offered anywhere. Our controls are used by CNN, CSPAN, National Geographic, and many others.
Backed by our 30 day money back guarantee and full 2 year warranty.
VZFC-U:
The FC-U provides smooth manual focus control of your Sony PMW-300/200/EX1/EX3 from the tripod handle. Similar to our pro rear focus controls, the FC-U adds a clamp-on EX gear adapter and a bracket-mounted gearbox that fits on most rod systems (15/19mm).
FCU on DVRods SystemRequires Rod Support System (15/19mm). If you do not have a rod system, see VariZoom s DV Rods System: a high-quality rods system for DV/HDV cameras which enables you to attach matteboxes, focus control systems, wireless adapters, and other accessories (Sold Separately).
VZDVRODS:
The DV Rods system boasts an impressive range of adjustment that will accommodate most cameras, and the X-Y rods-adjustment plates are even reversible to allow greater upward adjustment. When paired with VariZoom s new quick release mechanism, the possibilities are extended even further. The DV Rods system has additional threaded holes to enable attachment of aft-mount rods that will allow even more accessories to be mounted behind the camera, helping to counterbalance the fore-mounted accessories while keeping the overall configuration s center of gravity low.
Designed to work with the VZ-FCU and EFCU focus control systems for the Sony PWM-EX1 and EX3, the DV Rods system not only provides a mount for the focus bracket, it will allow users to add a mattebox or any other accessory that can be mounted to standard 15mm rods (19mm-15mm step-down adapter rings available for separate purchase). The DV Rods system was designed with functionality in mind, with a broad, flat mounting surface and low profile to prevent top-heaviness that can lead to awkward tilting or wobbly shots.
Highly Recommended Accessory for use with EX1/EX3 - VZQRP quick release plate. The VZQRP allows
great flexibility in mounting the camera, adjusting and dismounting it.
on request
VariZoom VZPROEX Lens control Sony EX und PMW Zoom
Professional Control for Sony PMW-300/200/160/EX1/EX3 Camcorders with 8 PIN Jack
€ 317.56 incl. VAT
in stock
VariZoom VZSPROEX-R remote control set Sony PMW and EX
The Pro-EX-R Lens Control Kit provides remote zoom control for the Sony PMW-300/200/EX1/EX3 professional video cameras and it will clamp to any tripod handle, jib, or support bar. The Pro-EX features precise control of zoom speed, comfortable grip, and a heavy-duty aluminum housing.
The FCU professional Cable Drive Focus Control allows a camera operator to pull focus on the SONY PMW-EX1 or EX3 cameras.
DVRods (for SRockEX-R ) are a high-quality rods system for DV/HDV cameras which enables you to attach matteboxes, focus control systems, wireless adapters, and other accessories.
Pro Zoom & Focus For Sony PMW-300/200/160/EX1/EX3 = VZPROEX + VZFCU + VZDVRODS
on request
VariZoom VZ-USPROEX7-R remote and monitor Kit Sony EX-PWM
Pro Zoom, Focus & Monitor Kit for Sony PMW-300/200/160/EX1/EX3 = VZ-PRO-EX + VZ-FC-U + VZ-DVRODS + VZ-TFT7U
on request
VariZoom VZPGEX Lens control Sony EX, PMW, PXW Zoom
Pistol Grip Professional Control for all Sony EX1 & EX3 Camcorders with 8 PIN Jack
For Sony PXW-X200 , PMW-300/200/160/EX1/EX3
€ 370.66 incl. VAT
must be ordered - not in stock
VariZoom VZSPGEX-R remote control Set Sony PMW EX
Pistol Grip Zoom & Focus for Sony PMW-300/200/160/EX1/EX3 = VZPG-EX + VZFCU + VZDVRODS
on request
VariZoom VZUSPGEX7-R
Pistol Grip Zoom, Focus & Monitor Kit for Sony PMW-300/200/160/EX1/EX3 = VZ-PG-EX + VZ-FC-U + VZ-DVRODS + VZ-TFT7U
on request
VariZoom VZPROL remote control LANC camera
Professional Lanc Remote Control for all Camcorders with LANC Jack
€ 332.01 incl. VAT
product already ordered
VariZoom VZPGF12 Lens Zoom Control Fujinon 12-Pin
Deluxe Pistol-Grip Fujinon Zoom Control - 12-pin, Compact, with Swivel Clamp
€ 534.31 incl. VAT
must be ordered - not in stock
VariZoom VZROCKC20 Lens control Canon CN-E 18-80mm
The VZROCKC20 zoom control for Canon CN-E 18-80mm cine-servo lens is our solution for the videographer who needs a very compact, lightweight zoom control. With its high-sensitivity rocker and speed limiter knob, precise repeatable zooms are easily achieved. Perfect for stabilizers and jibs.
• For Canon CN-E 18-80mm cine-servo lens or Canon CJ14ex4.3B IASE-S
• Pressure-sensitive zoom rocker and limiter knob for setting maximum speed
• Low profile record/pause button
• One-Shot Autofocus button for quick focus grabs
€ 355.81 incl. VAT
in stock
VariZoom VZEFC-U remote control Sony EX PMW
EFC-U is our e lectronic focus control (EFC-U) unit. The electronic version is similar to our popular EFC for Canon and Fujinon lenses but includes a 15mm/19mm rod mounting bracket and our custom clamp-on focus ring that easily attaches to your Sony PMW, -EX1 or -EX3 camera (requires rods, such as our VZ-DVRods). This system includes drive gears for Canon, Fujinon, and Film pitch (32DP/0.8M).
FCU on DVRods SystemVZ-DVRod System - Designed to work with the VZFCU and EFC - U focus control systems for the Sony PWM-EX1 and -EX3, the DV Rods system not only provides a mount for the focus bracket, it will allow users to add a mattebox or any other accessory that can be mounted to standard 15mm rods (19mm-15mm step-down adapter rings available for separate purchase). The DV Rods system was designed with functionality in mind, with a broad, flat mounting surface and low profile to prevent top-heaviness that can lead to awkward tilting or wobbly shots.
Note: Product Requires a Rail System such as the DVRods.
VariZoom's Electronic Focus Control, the EFC.
€ 759.62 incl. VAT
must be ordered - not in stock
VariZoom VZLFC Follow Focus Canon C100 C300
This is the only controller of its kind for the Canon C300 and C100 (EF-mount). It connects to the 2.5mm Remote port on the camera body and allows you to control focus with great precision from a distance using our proprietary LANC encoder technology. Whether you need to make very fine focal adjustments or quickly shift from near to far, the variable speed control smoothly adjusts the focus without any chatter or jumpy response. This controller also offers record, cam on/off, and push auto iris, as well as an indicator light for record status, low battery, etc. The VZ-LFC requires no battery and can be operated from longer distances using our optional extension cables.
Depending on the version and lens combination, you may need to go into the C100/C300 menu and change the AF mode to One Shot to get the focus control to work properly.
€ 211.36 incl. VAT
must be ordered - not in stock
VariZoom VZTOC-LDM motor to Varizoom VZTOC Series Controller
Lens Drive Motor System for TOC - incl. motor, gear set, & rod clamp (15mm/19mm)
€ 2118.84 incl. VAT
must be ordered - not in stock
VariZoom VZTOC-PWR-D/4 power cable powertap to VZTOC
D-Tap Power to 4 Pin Lemo for VariZoom VZTOC Controls
€ 137.00 incl. VAT
must be ordered - not in stock
VariZoom VZEFC2 electronic focus iris control
Electronic Focus or Iris Control for Broadcast Lenses
Full Manual Mode for the finest focus adjustments
Programmable Mode for presetting up to 5 preset focal points
LCD readout for positioning and programming
Includes control unit, servo focus bracket, 20' cable, carrying pouch,
Canon gear, Fujinon gear, Iris gear,
cable straps, rechargeable battery kit
Works up to 50' (extensions available in 20' increments)
Rechargeable Canon BP-915 style battery
€ 631.94 incl. VAT
must be ordered - not in stock
VariZoom VZTOC-PWR-XLR/4 - power cale 4 pin XLR to VZTOC
-->
€ 137.00 incl. VAT
must be ordered - not in stock
VariZoom VZEXTEFC60 extension cable 20 Meter for VZEFC
VariZoom VZEXTEFC60 - 60 feet extension cable for VariZoom EFC Controller
€ 73.40 incl. VAT
in stock
VariZoom VZEXTEFC10 extension cable 3 Meter for VZEFC S
VariZoom VZEXTEFC10 - 10 feet extension cable for VariZoom EFC Controller
€ 25.41 incl. VAT
in stock
VariZoom VZEXTMC100 extension cable 30 Meter MC100/MC50
VariZoom VZEXTMC100 - 100 feet Extension for MC100 or MC50 Pan and Tilt
€ 203.67 incl. VAT
in stock
VariZoom VZEXTMC20 extension cable 6 Meter MC100 MC50
VariZoom VZEXTMC20 - 20 feet Extension for MC100 or MC50 Pan and Tilt
€ 140.02 incl. VAT
in stock
VariZoom VZEXTMC50 extension cable 15 Meter MC100 MC50
VariZoom VZEXTMC50 - 50 feet Extension for MC100 or MC50 Pan and Tilt
€ 152.74 incl. VAT
in stock
VariZoom EXTL-J150-3 extension cable 3 meters JVC J150
Extension cable for all JVC J150 Controllers.
VariZoom EXTL-J150-3 - 1 0 feet Extension for JVC J150 Control
€ 25.41 incl. VAT
must be ordered - not in stock
VariZoom VZC8EX - conversion cable Canon Pro to SONY EX PMW
Canon 8-Pin to Sony EX 8-Pin Converter Cable
Use your Canon 8-pin zoom control on the Sony EX-1, EX-3 or PMW with this convenient affordable converter cable.
€ 98.53 incl. VAT
in stock
VariZoom VZEXTPZFI-10 - extension cable 3 Meter Panasonic
VariZoom VZEXTPZFI-10 10 feet Extension for All Panasonic ZFI & FI Series Controllers
€ 58.31 incl. VAT
only 2 stock
VariZoom VZEXTPZFI-20 extension cable 6 Meter Panasonic
VariZoom VZEXTPZFI-20 2 0 feet Extension for All Panasonic ZFI & FI Series Controllers
€ 94.01 incl. VAT
in stock
VariZoom VZEXTPZFI-50 - extension cable 15 Meter Panasonic
VariZoom VZEXTPZFI-50 5 0 feet Extension for All Panasonic ZFI & FI Series Controllers
€ 117.81 incl. VAT
in stock
VariZoom extension cable 10 feet Sony EX PMW VZEXTEX10
VariZoom VZEXTEX10 - 10 feet Extension Cable for Sony EX Zoom Controls .
€ 94.01 incl. VAT
in stock
VariZoom extension cable 20 feet Sony EX PMW VZEXTEX20
VariZoom VZEXTEX20 - 2 0 feet Extension Cable for Sony EX Zoom Controls .
€ 117.81 incl. VAT
in stock
VariZoom LANC extension cable 30 Meter VZEXTL100
Extension cable for all LANC Controllers and Remote controls and also for Panasonic Zoom Controllers.
VariZoom VZEXTL100 - 10 0 feet Extension for All LANC and Panasonic Zoom Controllers
€ 82.11 incl. VAT
in stock
VariZoom LANC extension cable 3 meters VZEXTL10
Extension cable for all LANC Controllers and Remote controls and also for Panasonic Zioom Controllers.
VariZoom VZEXTL10 - 1 0 feet Extension for All LANC and Panasonic Zoom Controllers
€ 29.75 incl. VAT
in stock
VariZoom LANC extension cable 20 feet VZEXTL20
Extension cable for all LANC Controllers and Remote controls and also for Panasonic Zioom Controllers.
VariZoom VZEXTL20 - 2 0 feet Extension for All LANC and Panasonic Zoom Controllers
€ 35.70 incl. VAT
more then 10 in stock
VariZoom VZAV/LANC adapter AV to LANC connector
Mini Audio/Video to Lanc Converter Cable for SONY Handycams
You will need this adapter cable to use our lens controls with Sony Handycams that do not have a LANC port. The connector of a VZ-Rock, Stealth, Pro-L, or PG-L plugs into one end of this cable and the other end plugs into the AV terminal on the Handycam.
€ 22.61 incl. VAT
only 2 stock
VariZoom LANC extension cable 50 feet VZEXTL50
Extension cable for all LANC Controllers and Remote controls - Also for Panasonic Zioom Controllers.
VariZoom VZEXTL50 - 5 0 feet Extension for All LANC and Panasonic Zoom Controllers
€ 58.31 incl. VAT
in stock
VariZoom VZExt-12/10 Extension cable 3 meters Fujinon 12pin
VariZoom VZEXT-12/10 - 10 feet Extension Cable for Fujinon 12-Pin controller and lenses
€ 177.31 incl. VAT
only 2 stock
VariZoom VZExt-12/20 Extension cable 6 meters Fujinon 12 Pin
VariZoom VZEXT-12/20 - 2 0 feet Extension Cable for Fujinon 12-Pin controller and lenses
€ 201.11 incl. VAT
only 2 stock
VariZoom VZExt-20/4 Extension cable 4 foot Canon 20 pin
Extend the connection between your Canon CN-E 18-80mm lens and our 20-pin zoom controllers (VZPGC20, VZROCKC20) or the Canon ZSG-C10 zoom grip. 4 feet of flexible cable.
€ 271.32 incl. VAT
in stock
VariZoom extension cable 50 feet Sony EX PMW VZEXTEX50
VariZoom VZEXTEX50 - 5 0 feet Extension Cable for Sony EX Zoom Controls .
No longer available - we would be happy to make you an offer for 2 x EXTEX20 plus 1 x EXTEX10
on request
VariZoom adapter Fujinon 8 to 12 Pin VZF8F12
Converts Fujinon 8-pin Controller to be used with a Fujinon 8-pin Lens
€ 118.94 incl. VAT
in stock
adapter Fujinon 8 controller to Canon 20 lens C8C20
Converts Fujinon 8-pin Controller to be used with a Canon 20 -pin Lens
€ 249.79 incl. VAT
in stock
VariZoom VZ-F8EX adapter fujinon to Sony PMW EX
Converts Fujinon 8-pin Controller to be used with a Sony PMW-300/200/160/EX1/EX3
€ 94.01 incl. VAT
in stock
adapter Canon 8 controller to Canon 20 lens C8C20
Converts Canon 8-pin Controller to be used with a Canon 20 -pin Lens
€ 249.79 incl. VAT
in stock
VariZoom VZExt-20/25 Extension cable 8m Canon 20 pin
Extend the connection between your Canon CN-E 18-80mm lens and our 20-pin zoom controllers (VZPGC20, VZROCKC20) or the Canon ZSG-C10 zoom grip. 25 feet / 8 Meters of flexible cable.
€ 355.81 incl. VAT
must be ordered - not in stock
VariZoom VZExt-12/50 Extension cable 15 meters Fujinon 12
VariZoom VZEXT-12/50 - 5 0 feet Extension Cable for Fujinon 12-Pin controller and lenses
€ 236.81 incl. VAT
product already ordered
VariZoom VZEXT-8/10 extension cable 3 Meter Canon Fujinon
VariZoom VZEXT-8/10 - 10 feet Extension Cable for Fujinon und Canon 8-Pin controllers and lenses
Manufactured with a male and female connector with Threaded locking collar this cable can be used to control the camera from wide distance.
Cables can be used on stage to control camera from long distance or can be used with camera crane in the special length.
€ 177.31 incl. VAT
only 2 stock
VariZoom VZEXT-8/20 Extension cable Fujinon 12
VariZoom VZEXT-8/20 - 2 0 feet Extension Cable for Fujinon und Canon 8-Pin controllers and lenses
Manufactured with a male and female connector with Threaded locking collar this cable can be used to control the camera from wide distance.
Cables can be used on stage to control camera from long distance or can be used with camera crane in the special length.
€ 201.11 incl. VAT
only 2 stock
VariZoom VZEXT-8/50 50 feet extension cable Canon Fujinon 8P
VariZoom VZEXT-8/50 - 5 0 feet Extension Cable for Fujinon und Canon 8-Pin controllers and lenses
Manufactured with a male and female connector with Threaded locking collar this cable can be used to control the camera from wide distance.
Cables can be used on stage to control camera from long distance or can be used with camera crane in the special length.
€ 236.81 incl. VAT
in stock
VariZoom VZC8F8 Adapter Canon controller zu Fujinon lens
Converts Canon 8-pin Controller to be used with a Fujinon 8-pin Lens
€ 118.94 incl. VAT
in stock
VariZoom VZF8C8 adapter Fujinon 8 Controller to Canon lens
Converts Fujinon 8-pin Controller to be used with a Canon 8-pin Lens
€ 118.94 incl. VAT
only 2 stock
VariZoom adapter Fujinon 12 to 8 pin VZF12F8
This adapter cable can be used to connect 12-pin Fujinon controllers to 8-pin Fujinon lenses.
€ 118.94 incl. VAT
in stock
VariZoom VZF12C8 adapter cable Fujinon 12 to canon lens
Converts Fujinon 12-pin Controller to be used with a Canon 8-pin Lens
€ 118.94 incl. VAT
in stock
VariZoom VZC8F12 adapter Canon Controller to Fujinon lens
Converts Canon 8-pin Controller to be used with a Fujinon 12-pin Lens
€ 118.94 incl. VAT
in stock
VariZoom VariSlider VSM1 camera Slider
VariSlider VSM1 Camera Slider
Our camera slider makes no compromises in quality and draws on years of design experience in Hollywood feature production. Made in America using all high-quality components and first-rate workmanship, the VSM1 slider exceeds the design and performance standards of camera sliders in this price range by a substantial margin. This system is future-proof, as the modular construction lends itself to part replacement, upgrades, track extensions, and integration into more complex and higher capacity applications.
Here is a list of the unique and appealing features of the VSM Series:
• Extremely high load capacity - 100 lbs and up
• Standard or inverted operation
• 54 standard track can be extended to any length with mating extension kits
• Sliding outriggers can be repositioned along the entire length of the track for placement on different surfaces or for added support
• Outriggers expand the lateral stance by 5 for stability and they use 2800lbs-rated industrial nonskid stainless ball-socket leveling feet
• Precision-milled billet cart with interchangeable wheels and mounting features for all types of heads and motorization upgrades
• Custom precision-matched track with mounting features for future accessories and upgrades, including motion control and counterweighted tiltable operation
• Low-profile head mounting for maximum stability
• Cart has built-in Mitchell mount and included 100mm, 75mm, and flat-base adapters to accommodate most heads
• Cart secures to endcap for safe and easy transport
• Includes padded carrying case and full hardware kit for out-of-the-box utility
• Optional heavy duty tripod mounts (tripods also available)
• Optional C-stand adapters available
€ 1592.05 incl. VAT
in stock
VariZoom VariSlider VSM1-T camera Slider Kit for dual tripod
VariSlider VSM1-T Camera Slider
Our camera slider makes no compromises in quality and draws on years of design experience in Hollywood feature production. Made in America using all high-quality components and first-rate workmanship, the VSM1 slider exceeds the design and performance standards of camera sliders in this price range by a substantial margin. This system is future-proof, as the modular construction lends itself to part replacement, upgrades, track extensions, and integration into more complex and higher capacity applications.
SET including 2 pcs. tripod mount 100mm
Here is a list of the unique and appealing features of the VSM Series:
• Extremely high load capacity - 100 lbs and up
• Standard or inverted operation
• 54 standard track can be extended to any length with mating extension kits
• Sliding outriggers can be repositioned along the entire length of the track for placement on different surfaces or for added support
• Outriggers expand the lateral stance by 5 for stability and they use 2800lbs-rated industrial nonskid stainless ball-socket leveling feet
• Precision-milled billet cart with interchangeable wheels and mounting features for all types of heads and motorization upgrades
• Custom precision-matched track with mounting features for future accessories and upgrades, including motion control and counterweighted tiltable operation
• Low-profile head mounting for maximum stability
• Cart has built-in Mitchell mount and included 100mm, 75mm, and flat-base adapters to accommodate most heads
• Cart secures to endcap for safe and easy transport
• Includes padded carrying case and full hardware kit for out-of-the-box utility
• Optional heavy duty tripod mounts (tripods also available)
• Optional C-stand adapters available
€ 2016.88 incl. VAT
in stock
VariZoom VariSlider VS-TM2 tripod mount kit
VariSlider VS-TM2 Pair of Tripod Mounts for VariSlider VSM series camera slidersThis pair of heavy-duty tripod mounts attaches directly to the outriggers of the VSM1 slider and allows you to mount the slider to any tripod with 100mm, 75mm, 65mm or flat base mounting. Two units are required for supporting a VSM1. Includes hefty, soft-touch hand knob for fixing the mount to your tripod.
€ 391.90 incl. VAT
in stock
VariZoom VZD100 Video Dolly up to 63Kg load capacity
Accommodating heavy or light tripods with mid level spreaders, this platform is ideal for moving large setups over flat ground. Locking wheels keep your tripod immobile during the shoot. When you are finished filming, this dolly folds down into a compact size for easy transportation to your next location.
Best suited for heavy-duty tripods, this beefy dolly can support a jib or crane setup.
Adjustable leg clamps
Excellent for use with a crane or a jib
Locking rubber wheels
Folds down to compact size for easy transportation
€ 562.23 incl. VAT
must be ordered - not in stock
VariZoom VZCINETRAC Video Dolly for flexible tracks
The varible length platform legs, the swiveling castors and the rubber tube track combine to provide the easiest dolly setup available. Due to the unique nature of this dolly the operator can manuever a large camera setup like a crane or jib, inside a tight space without colliding. You can easily build straight or curved track, then break down and change location within minutes.
• For use on the VZ-TRACK. Rubber tube track conforms to unique shapes
• Flexible platform fits large or small tripods
• Dolly setup supports heavy weight
• Folds compact for easy transport
• Durable cushioned case with straps
€ 873.40 incl. VAT
must be ordered - not in stock
VariZoom VZCINETRACSYSTEM Dolly Tracks and Tripod
The variable length platform legs, the swiveling casters and the flexible track combine to provide the easiest dolly setup available. Due to the unique nature of this dolly the operator can manuever a large camera setup inside a tight space without colliding. You can easily build straight or curved track, then break down and change location within minutes.
Flexible track allows unique dolly paths
Track comes in single lengths of 48' - add an additional track to double your dolly range (one 48' track makes about 22' when looped around to run a parallel)
Dolly setup supports heavy weight
Folds compact for easy transport
Durable cushioned case with straps
€ 1898.05 incl. VAT
Available soon - please send request for reservation
VariZoom VZCINETRACMASTER Track Dolly Tripod Head Kit
Master Cinetrac Kit = Cinetrac- Dolly + T C- 100A Tripod + FH100 Fluid Head + VZ-Track
The Cinetrac Master system is a dolly, flex track and tripod/fluid head setup for any professional videographer that allows for smooth dolly shots in a variety of situations where traditional track setups would be cumbersome. The system comes complete with the FH100 fluid head, TC-100A tripod, CineTrac Dolly and 22' flexible track.
€ 2497.75 incl. VAT
Available soon - please send request for reservation
VariZoom VZD50 Video Dolly
Extremely versatile yet very compact and lightweight, this tripod dolly coupled with our TK-75A is a powerful combination on the movie set.
Move your entire camera setup over flat ground quickly and easily. This adjustable platform will accommodate large and small tripods and can be used with or without low level spreaders. Brakes on each wheel keep your mount immobile during your shoot. When you are finished filming, this dolly folds down into a compact travel size for easy transport.
Highly adjustable
Wheel brakes
Folds down for easy transport
€ 184.70 incl. VAT
only 2 stock
VariZoom VZTRACK - rubber tracks for VZCineTrac
48' Single Rubber Track or use with VZ-CINETRAC (wraps parallel to about 22' of set-up track)
on request
VariZoom VZTRACK-CASE - transport flightcase for VZTRACK
VZTRACK-CASE - flightcase to transport the VariZoom VZTrack Runbber tracks. With rolls and grip system it will be easy to carry the heavyweight tracks.
on request
VariZoom VZ-SNAPCRANE9 camera crane by 3 Meter length
9 foot film and video crane, VZ-TCR100 Tripod & VZ-DCR100 Dolly. The SnapCrane has modular lightweight construction, stainless quick-release pins with lanyards, locking dovetail joints, and superior craftsmanship - read below for more detail.
VZSNAPCRANE9 CAMERA CRANE CAMERA JIB VariZoom s incredibly versatile SnapCrane is in a class by itself with our fast yet secure dovetail joint assembly, compact modular design allowing 4 different lengths, and painstaking quality control - no expense was spared. The SnapCrane was designed for years of trouble-free operation and it has the fastest tool-free setup and longest reach of any crane in its price category. Proudly manufactured in Austin, TX with attention to every detail, the SnapCrane is a truly professional tool that will last generations with proper care.
Every SnapCrane kit includes the dolly, tripod, and carrying case so you get a turnkey system that s been matched, assembled, and functionally tested prior to shipment. Quality, performance, and safety are all taken very seriously with the SnapCrane, so we make no compromises in materials or labor. There are less expensive systems on the market, but none of them come close to the build quality or versatility of the SnapCrane.
What are the advantages of the SnapCrane over the QuickJib? Longer horizontal reach (15 6? vs 9 6? max), higher vertical extension (18 3? vs. 13 9? max), superior stability & rigidity, greater flexibility (4 lengths vs. 2), better counterbalance mechanism, better pan/tilt base, upgraded hardware.
Jib Arm / Crane Body - Crane sections made from stiff, lightweight tubing are precision machined and powder coated before assembly and quality inspection. The upper extension section has a truss pattern cut into the sidewalls to retain strength while minimizing weight and reducing air resistance in light breezes (caution: never use a camera crane in windy conditions). The heavily reinforced, cable-tensioned design of the SnapCrane allows it to reach farther and higher without any sacrifice in stability or performance.
Pan/Tilt Base & Brake System - Our ultra-smooth, high-capacity pan/tilt base is built to exacting standards with oversize fasteners, sealed bearings, and beefy construction for a remarkably stable fulcrum point. Superior design, proud craftsmanship, and the finest components set this pan/tilt base apart from those used in other crane systems (it s also a significant upgrade over the QuickJib s). Our brake system utilizes a heavy-duty plate on the crane pivot section and a variable drag mechanism built into the right stator of the pan/tilt base. This system was designed to add significant variable drag and hold any position, but it s forgiving enough to slide under extreme force that could otherwise topple a jib with a locking-brake system.
Machined Dovetail Joints - Dovetail joint assembly allows for quick, extremely secure no-tools connection with redundant safety locks. A hefty stainless steel latch (w/ internal safety catch) clamps the joint from above while a secondary thumbscrew assures a tight and secure fit from below.
Deluxe Quick-Release Pins - Locking stainless aircraft pins of the highest quality and strength are used at the pivot points, and they are attached by lanyard to prevent them from ever being lost. These button-release, t-handle pins are simply the best available, and they represent an upgrade over those used on the QuickJib.
Cables and Couplings - Our modular cable system boosts crane stability and ridigity while keeping overall weight down by allowing us to use a single line of compact, lightweight tubing for the main arm. The superior-quality cable tensioning system keeps the SnapCrane taut, rock solid, and easy to control. The smooth-coated, corrosion resistant cables are easy to handle and will last a lifetime. Marine-grade stainless steel hardware is used exclusively throughout the SnapCrane, ensuring long-term field reliability.
Crane Case - Comes standard with VariZoom s new lightweight, heavy-duty Soft Case (hard case optional). This case has three reinforced handles (middle and both ends) along with a hefty shoulder strap, thick padding, and rubber feet. It can be used for other jibs, as well. Interior approx. 58?x11?x10?; Exterior 59?x12?x11?; Weight 4.9 lbs. Also available for purchase is the optional rolling hard case, for the ultimate in protected transport. Optional Hard Case: Exterior 63? x 15? (round); Interior 58? x 12? (round); Weight 20.5 lbs.
DCR100 Dolly - Our heavy-duty dolly has an ample spread, rugged solid-rubber wheels, foot brakes, and a positive leg-locking system that securely captures our TCR100 crane tripod. Includes padded carrying case.
TCR100 Crane Tripod - Our custom TCR100 is the only tripod we recommend for use with any crane, no matter the brand. We recommend you never use a telescoping or collapsible tripod under a crane, no matter how small. When supporting an expensive camera on a jib elevated above other valuable equipment or people, it is simply a no-brainer to eliminate all risk and use a single-section tripod instead of a telescoping type.
The TCR100 is designed specifically to be used with our DCR100 dolly.Safety and strength are top priorities: the TCR100 uses a solidmachined baseplate (not molded), specialty heavy-gauge tubing, andoversize leveling feet for an ultra-stable design that will neverfalter or fail when used properly with the DCR100 dolly. With anodizedaluminum, stainless steel fasteners and solid brass bushings, theTCR100 will last a lifetime.
9? Film & Video Crane incl. VZ-TCR100 Tripod & VZ-D100 Dolly
Standard Crane Configuration -10 9? Max Cam Ht. / 9? Vertical Movement
Possible to build 2 configurations
TCR100 Tripod
Custom Free-Wheel Dolly
Crane Soft Case - Soft Case for easy, protected transport
Optional Extension Section with Hardware - $1,495.95. Upgrades SnapCrane-9 to -12
What are the advantages of the SnapCrane over the QuickJib? Longer horizontal reach (15 6? vs 9 6? max), higher vertical extension (18 3? vs. 13 9? max), superior stability & rigidity, greater flexibility (4 lengths vs. 2), better counterbalance mechanism, better pan/tilt base, upgraded hardware.
Jib Arm / Crane Body - Crane sections made from stiff, lightweight tubing are precision machined and powder coated before assembly and quality inspection. The upper extension section has a truss pattern cut into the sidewalls to retain strength while minimizing weight and reducing air resistance in light breezes (caution: never use a camera crane in windy conditions). The heavily reinforced, cable-tensioned design of the SnapCrane allows it to reach farther and higher without any sacrifice in stability or performance.
Pan/Tilt Base & Brake System - Our ultra-smooth, high-capacity pan/tilt base is built to exacting standards with oversize fasteners, sealed bearings, and beefy construction for a remarkably stable fulcrum point. Superior design, proud craftsmanship, and the finest components set this pan/tilt base apart from those used in other crane systems (it s also a significant upgrade over the QuickJib s). Our brake system utilizes a heavy-duty plate on the crane pivot section and a variable drag mechanism built into the right stator of the pan/tilt base. This system was designed to add significant variable drag and hold any position, but it s forgiving enough to slide under extreme force that could otherwise topple a jib with a locking-brake system.
Machined Dovetail Joints - Dovetail joint assembly allows for quick, extremely secure no-tools connection with redundant safety locks. A hefty stainless steel latch (w/ internal safety catch) clamps the joint from above while a secondary thumbscrew assures a tight and secure fit from below.
Deluxe Quick-Release Pins - Locking stainless aircraft pins of the highest quality and strength are used at the pivot points, and they are attached by lanyard to prevent them from ever being lost. These button-release, t-handle pins are simply the best available, and they represent an upgrade over those used on the QuickJib.
Cables and Couplings - Our modular cable system boosts crane stability and ridigity while keeping overall weight down by allowing us to use a single line of compact, lightweight tubing for the main arm. The superior-quality cable tensioning system keeps the SnapCrane taut, rock solid, and easy to control. The smooth-coated, corrosion resistant cables are easy to handle and will last a lifetime. Marine-grade stainless steel hardware is used exclusively throughout the SnapCrane, ensuring long-term field reliability.
Crane Case - Comes standard with VariZoom s new lightweight, heavy-duty Soft Case (hard case optional). This case has three reinforced handles (middle and both ends) along with a hefty shoulder strap, thick padding, and rubber feet. It can be used for other jibs, as well. Interior approx. 58?x11?x10?; Exterior 59?x12?x11?; Weight 4.9 lbs. Also available for purchase is the optional rolling hard case, for the ultimate in protected transport. Optional Hard Case: Exterior 63? x 15? (round); Interior 58? x 12? (round); Weight 20.5 lbs.
DCR100 Dolly - Our heavy-duty dolly has an ample spread, rugged solid-rubber wheels, foot brakes, and a positive leg-locking system that securely captures our TCR100 crane tripod. Includes padded carrying case.
TCR100 Crane Tripod - Our custom TCR100 is the only tripod we recommend for use with any crane, no matter the brand. We recommend you never use a telescoping or collapsible tripod under a crane, no matter how small. When supporting an expensive camera on a jib elevated above other valuable equipment or people, it is simply a no-brainer to eliminate all risk and use a single-section tripod instead of a telescoping type.
The TCR100 is designed specifically to be used with our DCR100 dolly. Safety and strength are top priorities: the TCR100 uses a solid machined baseplate (not molded), specialty heavy-gauge tubing, and oversize leveling feet for an ultra-stable design that will never falter or fail when used properly with the DCR100 dolly. With anodized aluminum, stainless steel fasteners and solid brass bushings, the TCR100 will last a lifetime.
€ 5646.85 incl. VAT
must be ordered - not in stock
VariZoom VZSNAPCRANE12 camera crane jib 4 Meter
VariZoom's incredibly versatile SnapCrane is in a class by itself with our fast yet secure dovetail joint assembly, compact modular design allowing 4 different lengths, and painstaking quality control - no expense was spared. The SnapCrane was designed for years of trouble-free operation and it has the fastest tool-free setup and longest reach of any crane in its price category. Proudly manufactured in Austin, TX with attention to every detail, the SnapCrane is a truly professional tool that will last generations with proper care. Every SnapCrane kit includes the dolly, tripod, and carrying case so you get a turnkey system that's been matched, assembled, and functionally tested prior to shipment. Quality, performance, and safety are all taken very seriously with the SnapCrane, so we make no compromises in materials or labor. There are less expensive systems on the market, but none of them come close to the build quality or versatility of the SnapCrane. Jib Arm / Crane Body - Crane sections made from stiff, lightweight tubing are precision machined and powder coated before assembly and quality inspection. The upper extension section has a truss pattern cut into the sidewalls to retain strength while minimizing weight and reducing air resistance in light breezes (caution: never use a camera crane in windy conditions). The heavily reinforced, cable-tensioned design of the SnapCrane allows it to reach farther and higher without any sacrifice in stability or performance. Pan/Tilt Base & Brake System - Our ultra-smooth, high-capacity pan/tilt base is built to exacting standards with oversize fasteners, sealed bearings, and beefy construction for a remarkably stable fulcrum point. Superior design, proud craftsmanship, and the finest components set this pan/tilt base apart from those used in other crane systems (it's also a significant upgrade over the QuickJib's). Our brake system utilizes a heavy-duty plate on the crane pivot section and a variable drag mechanism built into the right stator of the pan/tilt base. This system was designed to add significant variable drag and hold any position, but it's forgiving enough to slide under extreme force that could otherwise topple a jib with a locking-brake system. Machined Dovetail Joints - Dovetail joint assembly allows for quick, extremely secure no-tools connection with redundant safety locks. A hefty stainless steel latch (w/ internal safety catch) clamps the joint from above while a secondary thumbscrew assures a tight and secure fit from below. Deluxe Quick-Release Pins - Locking stainless aircraft pins of the highest quality and strength are used at the pivot points, and they are attached by lanyard to prevent them from ever being lost. These button-release, t-handle pins are simply the best available, and they represent an upgrade over those used on the QuickJib. Cables and Couplings - Our modular cable system boosts crane stability and ridigity while keeping overall weight down by allowing us to use a single line of compact, lightweight tubing for the main arm. The superior-quality cable tensioning system keeps the SnapCrane taut, rock solid, and easy to control. The smooth-coated, corrosion resistant cables are easy to handle and will last a lifetime. Marine-grade stainless steel hardware is used exclusively throughout the SnapCrane, ensuring long-term field reliability. Crane Case - Comes standard with VariZoom's new lightweight, heavy-duty Soft Case (hard case optional). This case has three reinforced handles (middle and both ends) along with a hefty shoulder strap, thick padding, and rubber feet. It can be used for other jibs, as well. Interior approx. 58x11x10; Exterior 59x12x11; Weight 4.9 lbs. Also available for purchase is the optional rolling hard case, for the ultimate in protected transport. Optional Hard Case: Exterior 63 x 15 (round); Interior 58 x 12 (round); Weight 20.5 lbs. DCR100 Dolly - Our heavy-duty dolly has an ample spread, rugged solid-rubber wheels, foot brakes, and a positive leg-locking system that securely captures our TCR100 crane tripod. Includes padded carrying case. TCR100 Crane Tripod - Our custom TCR100 is the only tripod we recommend for use with any crane, no matter the brand. We recommend you never use a telescoping or collapsible tripod under a crane, no matter how small. When supporting an expensive camera on a jib elevated above other valuable equipment or people, it is simply a no-brainer to eliminate all risk and use a single-section tripod instead of a telescoping type. The TCR100 is designed specifically to be used with our DCR100 dolly. Safety and strength are top priorities: the TCR100 uses a solid machined baseplate (not molded), specialty heavy-gauge tubing, and oversize leveling feet for an ultra-stable design that will never falter or fail when used properly with the DCR100 dolly. With anodized aluminum, stainless steel fasteners and solid brass bushings, the TCR100 will last a lifetime.
• 12' Film & Video Crane incl. VZTCR100 Tripod & VZD100 Dolly
• Standard Crane Configuration - 14'3 Max Cam Ht. / 12'6 Vertical Movement
• Possible to build 3 length configurations
• TCR100 Tripod
• Custom Free-Wheel Dolly
• Crane Soft Case - Soft Case for easy, protected transport
For questions about the System give us a call 0049 6855 996046 or send us an email to info@cvc.de
€ 6777.35 incl. VAT
must be ordered - not in stock
VariZoom VZSNAPCRANE16 camera crane 5.3 Meter
Snapcrane kit includes 16' SnapCrane, VZ-TCR100 Tripod, and VZ-DCR 2 00 Dolly.
16 foot film and video crane, VZ-TCR100 Tripod, and VZ-DCR 2 00 Dolly. The SnapCrane has modular lightweight construction, stainless quick-release pins with lanyards, locking dovetail joints, and superior craftsmanship - read below for more detail.
VZSNAPCRANE16 CAMERA CRANE CAMERA JIB VariZoom s incredibly versatile SnapCrane is in a class by itself with our fast yet secure dovetail joint assembly, compact modular design allowing 4 different lengths, and painstaking quality control - no expense was spared. The SnapCrane was designed for years of trouble-free operation and it has the fastest tool-free setup and longest reach of any crane in its price category. Proudly manufactured in Austin, TX with attention to every detail, the SnapCrane is a truly professional tool that will last generations with proper care.
Every SnapCrane kit includes the dolly, tripod, and carrying case so you get a turnkey system that s been matched, assembled, and functionally tested prior to shipment. Quality, performance, and safety are all taken very seriously with the SnapCrane, so we make no compromises in materials or labor. There are less expensive systems on the market, but none of them come close to the build quality or versatility of the SnapCrane.
What are the advantages of the SnapCrane over the QuickJib? Longer horizontal reach (15 6? vs 9 6? max), higher vertical extension (18 3? vs. 13 9? max), superior stability & rigidity, greater flexibility (4 lengths vs. 2), better counterbalance mechanism, better pan/tilt base, upgraded hardware.
Jib Arm / Crane Body - Crane sections made from stiff, lightweight tubing are precision machined and powder coated before assembly and quality inspection. The upper extension section has a truss pattern cut into the sidewalls to retain strength while minimizing weight and reducing air resistance in light breezes (caution: never use a camera crane in windy conditions). The heavily reinforced, cable-tensioned design of the SnapCrane allows it to reach farther and higher without any sacrifice in stability or performance.
Pan/Tilt Base & Brake System - Our ultra-smooth, high-capacity pan/tilt base is built to exacting standards with oversize fasteners, sealed bearings, and beefy construction for a remarkably stable fulcrum point. Superior design, proud craftsmanship, and the finest components set this pan/tilt base apart from those used in other crane systems (it s also a significant upgrade over the QuickJib s). Our brake system utilizes a heavy-duty plate on the crane pivot section and a variable drag mechanism built into the right stator of the pan/tilt base. This system was designed to add significant variable drag and hold any position, but it s forgiving enough to slide under extreme force that could otherwise topple a jib with a locking-brake system.
Machined Dovetail Joints - Dovetail joint assembly allows for quick, extremely secure no-tools connection with redundant safety locks. A hefty stainless steel latch (w/ internal safety catch) clamps the joint from above while a secondary thumbscrew assures a tight and secure fit from below.
Deluxe Quick-Release Pins - Locking stainless aircraft pins of the highest quality and strength are used at the pivot points, and they are attached by lanyard to prevent them from ever being lost. These button-release, t-handle pins are simply the best available, and they represent an upgrade over those used on the QuickJib.
Cables and Couplings - Our modular cable system boosts crane stability and ridigity while keeping overall weight down by allowing us to use a single line of compact, lightweight tubing for the main arm. The superior-quality cable tensioning system keeps the SnapCrane taut, rock solid, and easy to control. The smooth-coated, corrosion resistant cables are easy to handle and will last a lifetime. Marine-grade stainless steel hardware is used exclusively throughout the SnapCrane, ensuring long-term field reliability.
Crane Case - Comes standard with VariZoom s new lightweight, heavy-duty Soft Case (hard case optional). This case has three reinforced handles (middle and both ends) along with a hefty shoulder strap, thick padding, and rubber feet. It can be used for other jibs, as well. Interior approx. 58?x11?x10?; Exterior 59?x12?x11?; Weight 4.9 lbs. Also available for purchase is the optional rolling hard case, for the ultimate in protected transport. Optional Hard Case: Exterior 63? x 15? (round); Interior 58? x 12? (round); Weight 20.5 lbs.
DCR100 Dolly - Our heavy-duty dolly has an ample spread, rugged solid-rubber wheels, foot brakes, and a positive leg-locking system that securely captures our TCR100 crane tripod. Includes padded carrying case.
TCR100 Crane Tripod - Our custom TCR100 is the only tripod we recommend for use with any crane, no matter the brand. We recommend you never use a telescoping or collapsible tripod under a crane, no matter how small. When supporting an expensive camera on a jib elevated above other valuable equipment or people, it is simply a no-brainer to eliminate all risk and use a single-section tripod instead of a telescoping type.
The TCR100 is designed specifically to be used with our DCR100 dolly.Safety and strength are top priorities: the TCR100 uses a solidmachined baseplate (not molded), specialty heavy-gauge tubing, andoversize leveling feet for an ultra-stable design that will neverfalter or fail when used properly with the DCR200 dolly. With anodizedaluminum, stainless steel fasteners and solid brass bushings, theTCR100 will last a lifetime.
16 foot Film and Video Crane incl. VZ-TCR100 Tripod and DCR Dolly w/ outtriggers
Crane Configuration - 18 3? Max Cam Ht. / 16 6? Vertical Movement
Possible to build all 4 length configurations
TCR100 Tripod
Dolly DCR
Crane Soft Case - Soft Case for easy, protected transport
€ 7907.85 incl. VAT
Available soon - please send request for reservation
VariZoom VZSNAPCRANE9-100 camera crane 3m with remotehead
Ultimate 9 foot Crane System - Film & Video Crane including VZ-TCR100 Tripod & VZ-DCR100 Dolly, & MC100. The SnapCrane has modular lightweight construction, stainless quick-release pins with lanyards, locking dovetail joints, and superior craftsmanship - read below for more detail.
VZSNAPCRANE9-100 CAMERA CRANE CAMERA JIB w/ VZMC100 remote head VariZoom s incredibly versatile SnapCrane is in a class by itself with our fast yet secure dovetail joint assembly, compact modular design allowing 4 different lengths, and painstaking quality control - no expense was spared. The SnapCrane was designed for years of trouble-free operation and it has the fastest tool-free setup and longest reach of any crane in its price category. Proudly manufactured in Austin, TX with attention to every detail, the SnapCrane is a truly professional tool that will last generations with proper care.
Every SnapCrane kit includes the dolly, tripod, and carrying case so you get a turnkey system that s been matched, assembled, and functionally tested prior to shipment. Quality, performance, and safety are all taken very seriously with the SnapCrane, so we make no compromises in materials or labor. There are less expensive systems on the market, but none of them come close to the build quality or versatility of the SnapCrane.
What are the advantages of the SnapCrane over the QuickJib? Longer horizontal reach (15 6? vs 9 6? max), higher vertical extension (18 3? vs. 13 9? max), superior stability & rigidity, greater flexibility (4 lengths vs. 2), better counterbalance mechanism, better pan/tilt base, upgraded hardware.
Jib Arm / Crane Body - Crane sections made from stiff, lightweight tubing are precision machined and powder coated before assembly and quality inspection. The upper extension section has a truss pattern cut into the sidewalls to retain strength while minimizing weight and reducing air resistance in light breezes (caution: never use a camera crane in windy conditions). The heavily reinforced, cable-tensioned design of the SnapCrane allows it to reach farther and higher without any sacrifice in stability or performance.
Pan/Tilt Base & Brake System - Our ultra-smooth, high-capacity pan/tilt base is built to exacting standards with oversize fasteners, sealed bearings, and beefy construction for a remarkably stable fulcrum point. Superior design, proud craftsmanship, and the finest components set this pan/tilt base apart from those used in other crane systems (it s also a significant upgrade over the QuickJib s). Our brake system utilizes a heavy-duty plate on the crane pivot section and a variable drag mechanism built into the right stator of the pan/tilt base. This system was designed to add significant variable drag and hold any position, but it s forgiving enough to slide under extreme force that could otherwise topple a jib with a locking-brake system.
Machined Dovetail Joints - Dovetail joint assembly allows for quick, extremely secure no-tools connection with redundant safety locks. A hefty stainless steel latch (w/ internal safety catch) clamps the joint from above while a secondary thumbscrew assures a tight and secure fit from below.
Deluxe Quick-Release Pins - Locking stainless aircraft pins of the highest quality and strength are used at the pivot points, and they are attached by lanyard to prevent them from ever being lost. These button-release, t-handle pins are simply the best available, and they represent an upgrade over those used on the QuickJib.
Cables and Couplings - Our modular cable system boosts crane stability and ridigity while keeping overall weight down by allowing us to use a single line of compact, lightweight tubing for the main arm. The superior-quality cable tensioning system keeps the SnapCrane taut, rock solid, and easy to control. The smooth-coated, corrosion resistant cables are easy to handle and will last a lifetime. Marine-grade stainless steel hardware is used exclusively throughout the SnapCrane, ensuring long-term field reliability.
Crane Case - Comes standard with VariZoom s new lightweight, heavy-duty Soft Case (hard case optional). This case has three reinforced handles (middle and both ends) along with a hefty shoulder strap, thick padding, and rubber feet. It can be used for other jibs, as well. Interior approx. 58?x11?x10?; Exterior 59?x12?x11?; Weight 4.9 lbs. Also available for purchase is the optional rolling hard case, for the ultimate in protected transport. Optional Hard Case: Exterior 63? x 15? (round); Interior 58? x 12? (round); Weight 20.5 lbs.
DCR100 Dolly - Our heavy-duty dolly has an ample spread, rugged solid-rubber wheels, foot brakes, and a positive leg-locking system that securely captures our TCR100 crane tripod. Includes padded carrying case.
TCR100 Crane Tripod - Our custom TCR100 is the only tripod we recommend for use with any crane, no matter the brand. We recommend you never use a telescoping or collapsible tripod under a crane, no matter how small. When supporting an expensive camera on a jib elevated above other valuable equipment or people, it is simply a no-brainer to eliminate all risk and use a single-section tripod instead of a telescoping type.
The TCR100 is designed specifically to be used with our DCR100 dolly.Safety and strength are top priorities: the TCR100 uses a solidmachined baseplate (not molded), specialty heavy-gauge tubing, andoversize leveling feet for an ultra-stable design that will neverfalter or fail when used properly with the DCR100 dolly. With anodizedaluminum, stainless steel fasteners and solid brass bushings, theTCR100 will last a lifetime.
9? SnapCrane + Heavy-Duty Remote Head - Adds VZ-MC100 remote pan/tilt head to SnapCrane9 System
What are the advantages of the SnapCrane over the QuickJib? Longer horizontal reach (15 6? vs 9 6? max), higher vertical extension (18 3? vs. 13 9? max), superior stability & rigidity, greater flexibility (4 lengths vs. 2), better counterbalance mechanism, better pan/tilt base, upgraded hardware.
Jib Arm / Crane Body - Crane sections made from stiff, lightweight tubing are precision machined and powder coated before assembly and quality inspection. The upper extension section has a truss pattern cut into the sidewalls to retain strength while minimizing weight and reducing air resistance in light breezes (caution: never use a camera crane in windy conditions). The heavily reinforced, cable-tensioned design of the SnapCrane allows it to reach farther and higher without any sacrifice in stability or performance.
Pan/Tilt Base & Brake System - Our ultra-smooth, high-capacity pan/tilt base is built to exacting standards with oversize fasteners, sealed bearings, and beefy construction for a remarkably stable fulcrum point. Superior design, proud craftsmanship, and the finest components set this pan/tilt base apart from those used in other crane systems (it s also a significant upgrade over the QuickJib s). Our brake system utilizes a heavy-duty plate on the crane pivot section and a variable drag mechanism built into the right stator of the pan/tilt base. This system was designed to add significant variable drag and hold any position, but it s forgiving enough to slide under extreme force that could otherwise topple a jib with a locking-brake system.
Machined Dovetail Joints - Dovetail joint assembly allows for quick, extremely secure no-tools connection with redundant safety locks. A hefty stainless steel latch (w/ internal safety catch) clamps the joint from above while a secondary thumbscrew assures a tight and secure fit from below.
Deluxe Quick-Release Pins - Locking stainless aircraft pins of the highest quality and strength are used at the pivot points, and they are attached by lanyard to prevent them from ever being lost. These button-release, t-handle pins are simply the best available, and they represent an upgrade over those used on the QuickJib.
Cables and Couplings - Our modular cable system boosts crane stability and ridigity while keeping overall weight down by allowing us to use a single line of compact, lightweight tubing for the main arm. The superior-quality cable tensioning system keeps the SnapCrane taut, rock solid, and easy to control. The smooth-coated, corrosion resistant cables are easy to handle and will last a lifetime. Marine-grade stainless steel hardware is used exclusively throughout the SnapCrane, ensuring long-term field reliability.
Crane Case - Comes standard with VariZoom s new lightweight, heavy-duty Soft Case (hard case optional). This case has three reinforced handles (middle and both ends) along with a hefty shoulder strap, thick padding, and rubber feet. It can be used for other jibs, as well. Interior approx. 58?x11?x10?; Exterior 59?x12?x11?; Weight 4.9 lbs. Also available for purchase is the optional rolling hard case, for the ultimate in protected transport. Optional Hard Case: Exterior 63? x 15? (round); Interior 58? x 12? (round); Weight 20.5 lbs.
DCR100 Dolly - Our heavy-duty dolly has an ample spread, rugged solid-rubber wheels, foot brakes, and a positive leg-locking system that securely captures our TCR100 crane tripod. Includes padded carrying case.
TCR100 Crane Tripod - Our custom TCR100 is the only tripod we recommend for use with any crane, no matter the brand. We recommend you never use a telescoping or collapsible tripod under a crane, no matter how small. When supporting an expensive camera on a jib elevated above other valuable equipment or people, it is simply a no-brainer to eliminate all risk and use a single-section tripod instead of a telescoping type.
The TCR100 is designed specifically to be used with our DCR100 dolly. Safety and strength are top priorities: the TCR100 uses a solid machined baseplate (not molded), specialty heavy-gauge tubing, and oversize leveling feet for an ultra-stable design that will never falter or fail when used properly with the DCR100 dolly. With anodized aluminum, stainless steel fasteners and solid brass bushings, the TCR100 will last a lifetime.
€ 7907.85 incl. VAT
must be ordered - not in stock
VariZoom VZ-SNAPCRANE12-100 camera crane jib 4 Meter
Ultimate 12 foot Crane System Film & Video Crane incl. VZ-TCR100 Tripod & VZ-DCR100 Dolly, & MC100. The SnapCrane has modular lightweight construction, stainless quick-release pins with lanyards, locking dovetail joints, and superior craftsmanship
€ 9038.35 incl. VAT
Available soon - please send request for reservation
VariZoom VZSNAPCRANE16-100 video crane 5.3 Meter with head
Snapcrane kit includes VZ-SnapCrane16, VZ-TCR100 Tripod, VZ-DCR 2 00 Dolly and MC100. The SnapCrane has modular lightweight construction, stainless quick-release pins with lanyards, locking dovetail joints, and superior craftsmanship
Ultimate 16 foot Crane System - Film & Video Crane incl. VZ-TCR100 Tripod, VZ-DCR100 Dolly, & MC100. The SnapCrane has modular lightweight construction, stainless quick-release pins with lanyards, locking dovetail joints, and superior craftsmanship - read below for more detail.
VZSNAPCRANE16-100 CAMERA CRANE CAMERA JIB w/ VZMC100 remote head - VariZoom s incredibly versatile SnapCrane is in a class by itself with our fast yet secure dovetail joint assembly, compact modular design allowing 4 different lengths, and painstaking quality control - no expense was spared. The SnapCrane was designed for years of trouble-free operation and it has the fastest tool-free setup and longest reach of any crane in its price category. Proudly manufactured in Austin, TX with attention to every detail, the SnapCrane is a truly professional tool that will last generations with proper care.
Every SnapCrane kit includes the dolly, tripod, and carrying case so you get a turnkey system that s been matched, assembled, and functionally tested prior to shipment. Quality, performance, and safety are all taken very seriously with the SnapCrane, so we make no compromises in materials or labor. There are less expensive systems on the market, but none of them come close to the build quality or versatility of the SnapCrane.
What are the advantages of the SnapCrane over the QuickJib? Longer horizontal reach (15 6? vs 9 6? max), higher vertical extension (18 3? vs. 13 9? max), superior stability & rigidity, greater flexibility (4 lengths vs. 2), better counterbalance mechanism, better pan/tilt base, upgraded hardware.
Jib Arm / Crane Body - Crane sections made from stiff, lightweight tubing are precision machined and powder coated before assembly and quality inspection. The upper extension section has a truss pattern cut into the sidewalls to retain strength while minimizing weight and reducing air resistance in light breezes (caution: never use a camera crane in windy conditions). The heavily reinforced, cable-tensioned design of the SnapCrane allows it to reach farther and higher without any sacrifice in stability or performance.
Pan/Tilt Base & Brake System - Our ultra-smooth, high-capacity pan/tilt base is built to exacting standards with oversize fasteners, sealed bearings, and beefy construction for a remarkably stable fulcrum point. Superior design, proud craftsmanship, and the finest components set this pan/tilt base apart from those used in other crane systems (it s also a significant upgrade over the QuickJib s). Our brake system utilizes a heavy-duty plate on the crane pivot section and a variable drag mechanism built into the right stator of the pan/tilt base. This system was designed to add significant variable drag and hold any position, but it s forgiving enough to slide under extreme force that could otherwise topple a jib with a locking-brake system.
Machined Dovetail Joints - Dovetail joint assembly allows for quick, extremely secure no-tools connection with redundant safety locks. A hefty stainless steel latch (w/ internal safety catch) clamps the joint from above while a secondary thumbscrew assures a tight and secure fit from below.
Deluxe Quick-Release Pins - Locking stainless aircraft pins of the highest quality and strength are used at the pivot points, and they are attached by lanyard to prevent them from ever being lost. These button-release, t-handle pins are simply the best available, and they represent an upgrade over those used on the QuickJib.
Cables and Couplings - Our modular cable system boosts crane stability and ridigity while keeping overall weight down by allowing us to use a single line of compact, lightweight tubing for the main arm. The superior-quality cable tensioning system keeps the SnapCrane taut, rock solid, and easy to control. The smooth-coated, corrosion resistant cables are easy to handle and will last a lifetime. Marine-grade stainless steel hardware is used exclusively throughout the SnapCrane, ensuring long-term field reliability.
Crane Case - Comes standard with VariZoom s new lightweight, heavy-duty Soft Case (hard case optional). This case has three reinforced handles (middle and both ends) along with a hefty shoulder strap, thick padding, and rubber feet. It can be used for other jibs, as well. Interior approx. 58?x11?x10?; Exterior 59?x12?x11?; Weight 4.9 lbs. Also available for purchase is the optional rolling hard case, for the ultimate in protected transport. Optional Hard Case: Exterior 63? x 15? (round); Interior 58? x 12? (round); Weight 20.5 lbs.
DCR100 Dolly - Our heavy-duty dolly has an ample spread, rugged solid-rubber wheels, foot brakes, and a positive leg-locking system that securely captures our TCR100 crane tripod. Includes padded carrying case.
TCR100 Crane Tripod - Our custom TCR100 is the only tripod we recommend for use with any crane, no matter the brand. We recommend you never use a telescoping or collapsible tripod under a crane, no matter how small. When supporting an expensive camera on a jib elevated above other valuable equipment or people, it is simply a no-brainer to eliminate all risk and use a single-section tripod instead of a telescoping type.
The TCR100 is designed specifically to be used with our DCR200 dolly.Safety and strength are top priorities: the TCR100 uses a solidmachined baseplate (not molded), specialty heavy-gauge tubing, andoversize leveling feet for an ultra-stable design that will neverfalter or fail when used properly with the DCR200 dolly. With anodizedaluminum, stainless steel fasteners and solid brass bushings, theTCR100 will last a lifetime.
16 foot Film and Video Crane incl. VZ-TCR100 Tripod & VZ-D200 Dolly w/ outtriggers
Crane Configuration - 18 3? Max Cam Ht. / 16 6? Vertical Movement
Possible to build all 4 length configurations
TCR100 Tripod
DCR200 Dolly w/ Outtriggers
Crane Soft Case - Soft Case for easy, protected transport
Snapcrane16-100 kit includes VZ-SnapCrane16, VZ-TCR100 Tripod, DCR200
Dolly and MC100 remotehead.
€ 10168.85 incl. VAT
Available soon - please send request for reservation
VariZoom VZ-SNAPCRANE16-100 Kamerakran 5.3 Meter + CPJR3
Snapcrane kit includes VZ-SnapCrane16, VZ-TCR100 Tripod, DCR200 Dolly, & CinemaPro remotehead CPJR3. The SnapCrane has modular lightweight construction, stainless quick-release pins with lanyards, locking dovetail joints, and superior craftsmanship
€ 20343.35 incl. VAT
Available soon - please send request for reservation
VariZoom VZJIBGRIP mount arm for jib
Right-angle adapter grip allows you to mount your camera control or other device to jib/crane weight bar for comfortable operation.
€ 78.00 incl. VAT
must be ordered - not in stock
VariZoom VZSCHARDCASE transport tubes for camera cranes
Heavy-duty Hard Rolling Case for SnapCrane or QuickJib.
€ 474.75 incl. VAT
only 2 stock
VariZoom VZBR10075 adapter ring 75mm to 150mm
Adapter for mounting a 75mm head (such as the Solo Jib) to a 100mm tripod mount.
Perfect to mount Solojhib to stable 100mm tripod.
€ 43.86 incl. VAT
must be ordered - not in stock
VariZoom VZTCR100 Crane Tripod up to 225Kg
Alumium crane tripod for use with VZ-SNAPCrane
Specifications
• Folded Length 49
• Max/Min Height 49 / 46
• Width 7.75
• Max. Load Capacity 500 lbs
• Unit Weight 16.8 Lbs.
• Material Heavy-duty aluminum w/ stainless steel and brass components
€ 1265.89 incl. VAT
in stock
VariZoom SOLOGRIP - Grip for SoloJib
The VariZoom SoloGrip is a comfortable grip threads onto the back of the Solo Jib and allows you to attach lens controls.
€ 49.66 incl. VAT
only 2 stock
VariZoom VZCS1 frame to mount monitor and controls
Desktop Support Frame for Pan/Tilt/Zoom/Focus Controls & LCD Monitor
€ 373.60 incl. VAT
in stock
VariZoom SOLO JIB CF - lightweight carbon fiber jib
The Solo Jib-CF is an ultra-portable, lightweight carbon fiber jib with a 2-stage telescoping arm that provides up to 9.2 ft of height, but fits into a compact case only 38 long. The carbon fiber construction makes the unit stiffer and even lighter than the aluminum version. The Solo Jib works with nearly any tripod, and it offers a range of use normally found only on more expensive, bulkier units. Special features include soft-stop pan and tilt brakes so you can fix the position of the jib without danger of tipping over, as well as a telescoping tail for counterweight adjustment. The Solo Jib is a perfect addition to VariZoom's VZTK75A tripod, and when paired with the Solo Slider Dolly, you have a really dynamic acquisition tool for beautiful, kinetic imagery. Add an optional fluid pan/tilt head like the VariZoom ChickenHead for more flexibility in shooting.
The Solo Jib is compatible with most tripods, so you can purchase the jib and mount it to your existing tripod, but it's also available as a kit with the Solo Slider Dolly and VZTK75A tripod for a truly flexible creative tool. The Solo Jib sets up in minutes with no tools and allows you to create fluid, sweeping shots and dynamic perspectives you won't achieve any other way. The 2-stage arm design allows the jib to extend further and store smaller than similarly priced units, and the unique pan and tilt soft-brakes distinguish the Solo Jib from others in its class. Watch our video to see just a few examples of how this system can transform your productions for a surprisingly low cost.
on request
VariZoom SOLO JIB CF KIT - jib tripod dolly kit
Carbon Fiber Jib + Tripod + Slider Dolly - This kit gives you a turnkey system for fluid pan/tilt/tracking/boom shots that offers a multitude of creative possibilities and a really dynamic acquisition tool for beautiful, kinetic imagery. The Solo Jib-CF is an ultra-portable, lightweight carbon fiber jib with a 2-stage telescoping arm that provides up to 9.2 ft of height, but fits into a compact case. Special features include soft-stop pan and tilt brakes so you can fix the position of the jib without danger of tipping over, as well as a telescoping tail for counterweight adjustment. The Solo Slider Dolly eliminates the need for a separate dolly and slider by combining the functions of both into one device.The specially designed wheels enable smooth and completely silent operation, and the included underpadding allows you to set up the track on nearly any surface, including grass, gravel, carpet, tile, etc. The entire dolly/tripod/jib system fits into 3 cases for easy transport, and setup is achieved without tools by one person in a matter of minutes. NOTE: This system does not include a fluid pan/tilt head that mounts to the top of the jib. The tripod includes a ball-leveling head that will not mount to the top of the jib. Add an optional flat-base fluid pan/tilt head like the VariZoom ChickenHead for more flexibility in shooting.
Solo Jib-CF - The Solo Jib-CF sets up in minutes with no tools and allows you to create fluid, sweeping shots and dynamic perspectives you won't achieve any other way. The 2-stage arm design allows the jib to extend further and store smaller than similarly priced units, and the unique pan and tilt soft-brakes distinguish the Solo Jib from others in its class. Made from carbon fiber for added rigidity and lower weight than the aluminum version. Watch our video to see just a few examples of how this system can transform your productions for a surprisingly low cost.
Solo Slider Dolly - There's no need to buy a one-dimensional slider when you can get VariZoom's Solo Slider Dolly Kit, a system that offers much greater length and height capability, as well as the flexibility of adding a Solo Jib for a kit price that is lower than the cost of many slider systems. The Solo Slider Dolly sets up in minutes with no tools, and it allows you to achieve tracking shots with up to 13.5 feet of travel (at 16 ft track length). Because the dolly has adjustable tripod mounting brackets, you can run the system inches off the ground with a mini tripod, low-profile on a broad countertop, or at any height up to 67 (using the VZ-T75A).Whether you're following talent, tracking sports on the sideline, or simply adding motion to stir up your scenes, the Solo Slider Dolly Kit has you covered. The Solo Slider Dolly system fits into a custom case with a total weight of only 26 lbs. Watch our video for a few examples of how to use this high-value system to improve your productions.
VZ-T75A - This lightweight, affordable tripod system is our biggest seller for a reason. Combining value with a strong feature set and high-grade construction, the T75A is an excellent choice for any compact video or HDSLR shooter. Padded carrying case, 2-stage adjustment for compact storage & extra-tall max height, the TK75 is not just a good deal, it's a great video tripod. System includes tripod legs and padded carrying case.
Ball-leveling system (65/75mm hybrid)
Fluid Head w/ adjustable tilt drag and quick release plate
2-Stage height adjustment
Mid level spreader
Built in bubble for leveling
Switchable Rubber/Spiked feet
Dual handle capability (w/ optional 2nd-handle accessory)
NOTE: This system does not include a fluid pan/tilt head that mounts to the top of the jib. The tripod includes a ball-leveling head that will not mount to the top of the jib.
Add an optional flat-base fluid pan/tilt head like the VariZoom ChickenHead for more flexibility in shooting.
on request
VariZoom SOLO SLIDER DOLLY for lightweight setups
The Solo Slider Dolly is a one-of-a-kind system the combines all the benefits of a track dolly with the portable, flexible nature of a slider system. The system will accommodate nearly any tripod from a heavy-duty 100mm unit down to a mini tripod / hi hat, and the track system sets up in 5 increments up to 16 ft. The specially designed wheels enable smooth and completely silent operation, and the included underpadding allows you to set up the track on nearly any surface, including grass, gravel, carpet, tile, etc. The Solo Slider Dolly eliminates the need for a separate dolly and slider by combining the functions of both into one device, and the entire system fits into a single compact carrying case. Add a VZTK75A and/or a Solo Jib for greatly expanded capability.
There's no need to buy a one-dimensional slider when you can get VariZoom's Solo Slider Dolly, a system that offers much greater length and height capability, as well as the flexibility of adding a VZTK75A tripod and Solo Jib for a kit price that is lower than the cost of many slider systems. The Solo Slider Dolly sets up in minutes with no tools, and it allows you to achieve tracking shots with up to 13.5 feet of travel (at 16 ft track length). Because the dolly has adjustable tripod mounting brackets, you can run the system inches off the ground with a mini tripod, low-profile on a broad countertop, or at any height up to the maximum your tripod allows.Whether you're following talent, tracking sports on the sideline, or simply adding motion to stir up your scenes, the Solo Slider Dolly has you covered. The entire system fits into a custom case with a total weight of only 26 lbs. Watch our video for a few examples of how to use this high-value system to improve your productions.
€ 708.05 incl. VAT
must be ordered - not in stock
VariZoom SOLO SLIDER DOLLY KIT with tripod
This kit adds the popular VZTK75A tripod system to the the Solo Slider Dolly, a one-of-a-kind system the combines all the benefits of a track dolly with the portable, flexible nature of a slider system. The kit gives you a turnkey system for fluid pan/tilt/tracking shots at a height range of 33 to 67, and the track sets up in 5 increments up to 16 ft. The specially designed wheels enable smooth and completely silent operation, and the included underpadding allows you to set up the track on nearly any surface, including grass, gravel, carpet, tile, etc. The Solo Slider Dolly eliminates the need for a separate dolly and slider by combining the functions of both into one device, and the entire system fits into 2 compact carrying cases.
Solo Slider Dolly - There's no need to buy a one-dimensional slider when you can get VariZoom's Solo Slider Dolly Kit, a system that offers much greater length and height capability, as well as the flexibility of adding a Solo Jib for a kit price that is lower than the cost of many slider systems. The Solo Slider Dolly sets up in minutes with no tools, and it allows you to achieve tracking shots with up to 13.5 feet of travel (at 16 ft track length). Because the dolly has adjustable tripod mounting brackets, you can run the system inches off the ground with a mini tripod, low-profile on a broad countertop, or at any height up to 67 (using the VZ-TK75A).Whether you're following talent, tracking sports on the sideline, or simply adding motion to stir up your scenes, the Solo Slider Dolly Kit has you covered. The Solo Slider Dolly system fits into a custom case with a total weight of only 26 lbs. Watch our video for a few examples of how to use this high-value system to improve your productions.
VZ-TK75A - This lightweight, affordable tripod system is our biggest seller for a reason. Combining value with a strong feature set and high-grade construction, the TK75A is an excellent choice for any compact video or HDSLR shooter. With its ball-leveling fluid head, padded carrying case, 2-stage adjustment for compact storage & extra-tall max height, the TK75A is not just a good deal, it's a great video tripod. System includes tripod legs, fluid head w/ quick-release plate, telescoping pan handle, and padded carrying case.
Ball-leveling system (65/75mm hybrid)
Fluid Head w/ adjustable tilt drag and quick release plate
2-Stage height adjustment
Mid level spreader
Built in bubble for leveling
Switchable Rubber/Spiked feet
Dual handle capability (w/ optional 2nd-handle accessory)
€ 977.42 incl. VAT
Available soon - please send request for reservation
VariZoom VZQUICKJIB2KIT-100 camera crane Head tripod dolly
QuickJib Kit includes, jib w/ extension, DCR100 Dolly, TCR100 Tripod & MC100 pan/tilt head.
VZQUICKJIB2KIT-100 CAMERA JIB CAMERA CRANE w/ VZMC100 remote head - VariZoom s QuickJib represents the perfect balance of quality and economy in a well thought-out design. This is the answer for those who love all of the options of the SnapCrane, but aren t ready to spend that much. The Quick Jib gives you many of the features of the Snap Crane at a more affordable price. With the Quick Jib you get an economical, but secure captive clamp system for extending the jib, along with lanyard-attached stainless aircraft pins for quick assembly. The QuickJib is a professional, tool-free jib arm that assembles rapidly and safely. The QuickJib, like all of our products, was designed for years of trouble-free, reliable operation in the field. With attention to every detail, we have created a tool that will last generations with proper care.
VZMC100 remote head
More crane operators choose VariZoom heads to add on to their cranes / jibs than any other remote head on the market. Users of the QuickJib, SnapCrane and other jibs choose the MC100. The reason is VariZoom s MC100 and MC50 have a tried and true history around the globe. VariZoom heads are reliable and we can service them years after the purchase if they ever need repair as they are made here in our Austin, TX factory. The MC100 has been the choice of rental houses around the globe because of the rugged and reliable design. Buy with confidence from VariZoom as we take care of our customers.
VZQUICKJIB2KIT
Jib Arm - The QuickJib selectively uses industrial powder coating and anodizing for durable cosmetics, with stainless steel fasteners throughout. The slim QuickJib outperforms the competition by having less air resistance in breezy conditions than jibs utilizing a four-arm support system (never use in high-wind conditions). The QuickJib will mount to any 100mm tripod, although we recommend only using non-telescoping legs for safety.
Additionally, our quick extension kit attaches in minutes with absolutely no tools, as opposed to more cumbersome systems that require multiple tools and bolts to attach their extensions. The extension kit mates to the standard QuickJib with our Captive Clamp Joint system, which uses two ergonomic, high-torque hand knobs to compress the captive clamps, assuring the joint is rock solid.
Brake System - VariZoom s Brake system utilizes a heavy-duty plate that is securely mounted to the pivot section. Brake compression system is built into the left stator of the pan/tilt base and designed to add significant variable drag, but forgiving enough to slide under extreme force that could otherwise topple a locking-brake jib system.
Locking Pins - Locking stainless aircraft pins of high quality and strength are used at the pivot points, and they are attached by lanyard to prevent them from ever being lost.
Tilting Mechanisms - Camera platform and tilt base join to the jib arm with stainless aircraft pins that insert through sealed radial ball bearings at the tilt base and high-performance sleeve bearings at the camera platform, resulting in silent, smooth motion. The camera platform also has a built-in spirit level for quick reference and adjustment.
Telescoping Counterweight Section - Telescoping weight arm adjusts up to 3 feet for tremendous flexibility. Extend the arm to reduce the amount of weight needed, shorten it to work in tighter spaces, or simply adjust it to fine-tune the counterbalance.
DCR100 Dolly - Our heavy-duty dolly has an ample spread and a positive leg-locking system that securely captures our TCR100 crane tripod.
TCR100 Crane Tripod - Our custom-built crane tripod is the only tripod we recommend for use with any crane, no matter the brand. We recommend you never use a telescoping or collapsible tripod under a crane, no matter how small. When supporting an expensive camera on a jib elevated above other valuable equipment or people, it is simply a no-brainer to eliminate all risk and use a single-section tripod instead of a telescoping type.
The TCR100 crane tripod is machined and built in-house and specifically designed to be used in combination with the DCR100 dolly. Safety & strength are top priorities: the TCR100 uses a solid machined (not molded) base-plate and fittings for strength and precision, specialty heavy-gauge tubing, and oversize leveling feet for an ultra-stable design that will never falter or fail when used properly with the DCR100 dolly.
VariZoom jibs are professional tools with quick setup, long-term reliability, and outstanding performance. Look closely to see the finer details of our thoughtful design, including tool-free assembly and stainless quick-release pins attached by lanyard so they ll never be lost. Scroll down to see how VariZoom takes your investment seriously.
New: The QuickJib comes with VariZoom s new lightweight, thickly-padded Soft Case. This heavy-duty case can also be purchased separately, and can be used for other jibs. Exterior 59?x12?x11?; Interior 58?x11?x10?; Weight 4.9 lbs. Hard Case is an optional upgrade (63?x15?, 20.5 lbs.)
€ 8919.05 incl. VAT
Available soon - please send request for reservation
VariZoom VZQUICKJIBKIT camera crane with tripod and dolly
Jib with DCR100 Dolly, TCR100 Tripod
VZQUICKJIBKIT CAMERA JIB CAMERA CRANE VariZoom s QuickJib represents the perfect balance of quality and economy in a well thought-out design. This is the answer for those who love all of the options of the SnapCrane, but aren t ready to spend that much. The Quick Jib gives you many of the features of the Snap Crane at a more affordable price. With the Quick Jib you get an economical, but secure captive clamp system for extending the jib, along with lanyard-attached stainless aircraft pins for quick assembly. The QuickJib is a professional, tool-free jib arm that assembles rapidly and safely. The QuickJib, like all of our products, was designed for years of trouble-free, reliable operation in the field. With attention to every detail, we have created a tool that will last generations with proper care.
Starting with the simplest package (jib only) up to our complete system (recommended), which includes dolly and tripod legs, you ll see that we consider safety to be the highest priority.
Jib Arm - The QuickJib selectively uses industrial powder coating and anodizing for durable cosmetics, with stainless steel fasteners throughout. The slim QuickJib outperforms the competition by having less air resistance in breezy conditions than jibs utilizing a four-arm support system (never use in high-wind conditions). The QuickJib will mount to any 100mm tripod, although we recommend only using non-telescoping legs for safety.
Additionally, our quick extension kit attaches in minutes with absolutely no tools, as opposed to more cumbersome systems that require multiple tools and bolts to attach their extensions. The extension kit mates to the standard QuickJib with our Captive Clamp Joint system, which uses two ergonomic, high-torque hand knobs to compress the captive clamps, assuring the joint is rock solid.
Brake System - VariZoom s Brake system utilizes a heavy-duty plate that is securely mounted to the pivot section. Brake compression system is built into the left stator of the pan/tilt base and designed to add significant variable drag, but forgiving enough to slide under extreme force that could otherwise topple a locking-brake jib system.
Locking Pins - Locking stainless aircraft pins of high quality and strength are used at the pivot points, and they are attached by lanyard to prevent them from ever being lost.
Tilting Mechanisms - Camera platform and tilt base join to the jib arm with stainless aircraft pins that insert through sealed radial ball bearings at the tilt base and high-performance sleeve bearings at the camera platform, resulting in silent, smooth motion. The camera platform also has a built-in spirit level for quick reference and adjustment.
Telescoping Counterweight Section - Telescoping weight arm adjusts up to 3 feet for tremendous flexibility. Extend the arm to reduce the amount of weight needed, shorten it to work in tighter spaces, or simply adjust it to fine-tune the counterbalance.
DCR100 Dolly - Our heavy-duty dolly has an ample spread and a positive leg-locking system that securely captures our TCR100 crane tripod.
TCR100 Crane Tripod - Our custom-built crane tripod is the only tripod we recommend for use with any crane, no matter the brand. We recommend you never use a telescoping or collapsible tripod under a crane, no matter how small. When supporting an expensive camera on a jib elevated above other valuable equipment or people, it is simply a no-brainer to eliminate all risk and use a single-section tripod instead of a telescoping type.
The TCR100 crane tripod is machined and built in-house and specifically designed to be used in combination with the DCR100 dolly. Safety & strength are top priorities: the TCR100 uses a solid machined (not molded) base-plate and fittings for strength and precision, specialty heavy-gauge tubing, and oversize leveling feet for an ultra-stable design that will never falter or fail when used properly with the DCR100 dolly.
VariZoom jibs are professional tools with quick setup, long-term reliability, and outstanding performance. Look closely to see the finer details of our thoughtful design, including tool-free assembly and stainless quick-release pins attached by lanyard so they ll never be lost. Scroll down to see how VariZoom takes your investment seriously.
New: The QuickJib comes with VariZoom s new lightweight, thickly-padded Soft Case. This heavy-duty case can also be purchased separately, and can be used for other jibs. Exterior 59?x12?x11?; Interior 58?x11?x10?; Weight 4.9 lbs. Hard Case is an optional upgrade (63?x15?, 20.5 lbs.)
€ 4754.05 incl. VAT
Available soon - please send request for reservation
VariZoom VZQUICKJIBKIT-100 camera crane dolly tripod head
QuickJib Kit includes jib, DCR100 dolly, TCR100 tripod, and MC100 Pan/Tilt head
VZQUICKJIBKIT-100 CAMERA JIB CAMERA CRANE w/ VZMC100 remote head VariZoom s QuickJib represents the perfect balance of quality and economy in a well thought-out design. This is the answer for those who love all of the options of the SnapCrane, but aren t ready to spend that much. The Quick Jib gives you many of the features of the Snap Crane at a more affordable price. With the Quick Jib you get an economical, but secure captive clamp system for extending the jib, along with lanyard-attached stainless aircraft pins for quick assembly. The QuickJib is a professional, tool-free jib arm that assembles rapidly and safely. The QuickJib, like all of our products, was designed for years of trouble-free, reliable operation in the field. With attention to every detail, we have created a tool that will last generations with proper care.
VZMC100 remote head
More crane operators choose VariZoom heads to add on to their cranes / jibs than any other remote head on the market. Users of the QuickJib, SnapCrane and other jibs choose the MC100. The reason is VariZoom s MC100 and MC50 have a tried and true history around the globe. VariZoom heads are reliable and we can service them years after the purchase if they ever need repair as they are made here in our Austin, TX factory. The MC100 has been the choice of rental houses around the globe because of the rugged and reliable design. Buy with confidence from VariZoom as we take care of our customers.
VZQUICKJIBKIT
Jib Arm - The QuickJib selectively uses industrial powder coating and anodizing for durable cosmetics, with stainless steel fasteners throughout. The slim QuickJib outperforms the competition by having less air resistance in breezy conditions than jibs utilizing a four-arm support system (never use in high-wind conditions). The QuickJib will mount to any 100mm tripod, although we recommend only using non-telescoping legs for safety.
Additionally, our quick extension kit attaches in minutes with absolutely no tools, as opposed to more cumbersome systems that require multiple tools and bolts to attach their extensions. The extension kit mates to the standard QuickJib with our Captive Clamp Joint system, which uses two ergonomic, high-torque hand knobs to compress the captive clamps, assuring the joint is rock solid.
Brake System - VariZoom s Brake system utilizes a heavy-duty plate that is securely mounted to the pivot section. Brake compression system is built into the left stator of the pan/tilt base and designed to add significant variable drag, but forgiving enough to slide under extreme force that could otherwise topple a locking-brake jib system.
Locking Pins - Locking stainless aircraft pins of high quality and strength are used at the pivot points, and they are attached by lanyard to prevent them from ever being lost.
Tilting Mechanisms - Camera platform and tilt base join to the jib arm with stainless aircraft pins that insert through sealed radial ball bearings at the tilt base and high-performance sleeve bearings at the camera platform, resulting in silent, smooth motion. The camera platform also has a built-in spirit level for quick reference and adjustment.
Telescoping Counterweight Section - Telescoping weight arm adjusts up to 3 feet for tremendous flexibility. Extend the arm to reduce the amount of weight needed, shorten it to work in tighter spaces, or simply adjust it to fine-tune the counterbalance.
DCR100 Dolly - Our heavy-duty dolly has an ample spread and a positive leg-locking system that securely captures our TCR100 crane tripod.
TCR100 Crane Tripod - Our custom-built crane tripod is the only tripod we recommend for use with any crane, no matter the brand. We recommend you never use a telescoping or collapsible tripod under a crane, no matter how small. When supporting an expensive camera on a jib elevated above other valuable equipment or people, it is simply a no-brainer to eliminate all risk and use a single-section tripod instead of a telescoping type.
The TCR100 crane tripod is machined and built in-house and specifically designed to be used in combination with the DCR100 dolly. Safety & strength are top priorities: the TCR100 uses a solid machined (not molded) base-plate and fittings for strength and precision, specialty heavy-gauge tubing, and oversize leveling feet for an ultra-stable design that will never falter or fail when used properly with the DCR100 dolly.
VariZoom jibs are professional tools with quick setup, long-term reliability, and outstanding performance. Look closely to see the finer details of our thoughtful design, including tool-free assembly and stainless quick-release pins attached by lanyard so they ll never be lost. Scroll down to see how VariZoom takes your investment seriously.
New: The QuickJib comes with VariZoom s new lightweight, thickly-padded Soft Case. This heavy-duty case can also be purchased separately, and can be used for other jibs. Exterior 59?x12?x11?; Interior 58?x11?x10?; Weight 4.9 lbs. Hard Case is an optional upgrade (63?x15?, 20.5 lbs.)
€ 8324.05 incl. VAT
Available soon - please send request for reservation
VariZoom VZQUICKJIBEXT crane extension for VZQUICKJIB
Extension Kit for QuickJib. Increases reach from 5ft to 9ft 6in, and increases max height from 10ft 2in to 13ft 9in.
€ 1184.05 incl. VAT
must be ordered - not in stock
VariZoom VZQUICKJIB camera Jib Arm for camera up to 23 Kg
Quick Jib Small Configuration (Jib Only)
The QuickJib (jib only) is our new low-cost, high-performance jib for cameras up to 50lbs. Easy to assemble in two different lengths, this compact and portable unit is ideal for indoor, outdoor, and studio applications at any budget.
VariZoom's QuickJib represents the perfect balance of quality and economy in a well thought-out design. This is the answer for those who love all of the options of the SnapCrane, but aren't ready to spend that much. The Quick Jib gives you many of the features of the Snap Crane at a more affordable price. With the Quick Jib you get an economical, but secure captive clamp system for extending the jib, along with lanyard-attached stainless aircraft pins for quick assembly. The QuickJib is a professional, tool-free jib arm that assembles rapidly and safely. The QuickJib, like all of our products, was designed for years of trouble-free, reliable operation in the field. With attention to every detail, we have created a tool that will last generations with proper care.
Starting with the simplest package (jib only) up to our complete system (recommended), which includes dolly and tripod legs, you'll see that we consider safety to be the highest priority.
Jib Arm - The QuickJib selectively uses industrial powder coating and anodizing for durable cosmetics, with stainless steel fasteners throughout. The slim QuickJib outperforms the competition by having less air resistance in breezy conditions than jibs utilizing a four-arm support system (never use in high-wind conditions). The QuickJib will mount to any 100mm tripod, although we recommend only using non-telescoping legs for safety.
Additionally, our quick extension kit attaches in minutes with absolutely no tools, as opposed to more cumbersome systems that require multiple tools and bolts to attach their extensions. The extension kit mates to the standard QuickJib with our Captive Clamp Joint system, which uses two ergonomic, high-torque hand knobs to compress the captive clamps, assuring the joint is rock solid.
Brake System - VariZoom's Brake system utilizes a heavy-duty plate that is securely mounted to the pivot section. Brake compression system is built into the left stator of the pan/tilt base and designed to add significant variable drag, but forgiving enough to slide under extreme force that could otherwise topple a locking-brake jib system.
Locking Pins - Locking stainless aircraft pins of high quality and strength are used at the pivot points, and they are attached by lanyard to prevent them from ever being lost.
Tilting Mechanisms - Camera platform and tilt base join to the jib arm with stainless aircraft pins that insert through sealed radial ball bearings at the tilt base and high-performance sleeve bearings at the camera platform, resulting in silent, smooth motion. The camera platform also has a built-in spirit level for quick reference and adjustment.
Telescoping Counterweight Section - Telescoping weight arm adjusts up to 3 feet for tremendous flexibility. Extend the arm to reduce the amount of weight needed, shorten it to work in tighter spaces, or simply adjust it to fine-tune the counterbalance.
DCR100 Dolly (optional, not included with this kit) - Our heavy-duty dolly has an ample spread and a positive leg-locking system that securely captures our TCR100 crane tripod.
TCR100 Crane Tripod (optional, not included with this kit) - Our custom-built crane tripod is the only tripod we recommend for use with any crane, no matter the brand. We recommend you never use a telescoping or collapsible tripod under a crane, no matter how small. When supporting an expensive camera on a jib elevated above other valuable equipment or people, it is simply a no-brainer to eliminate all risk and use a single-section tripod instead of a telescoping type.
The TCR100 crane tripod is machined and built in-house and specifically designed to be used in combination with the DCR100 dolly. Safety & strength are top priorities: the TCR100 uses a solid machined (not molded) base-plate and fittings for strength and precision, specialty heavy-gauge tubing, and oversize leveling feet for an ultra-stable design that will never falter or fail when used properly with the DCR100 dolly.
VariZoom jibs are professional tools with quick setup, long-term reliability, and outstanding performance. Look closely to see the finer details of our thoughtful design, including tool-free assembly and stainless quick-release pins attached by lanyard so they'll never be lost. Scroll down to see how VariZoom takes your investment seriously.
New: The QuickJib comes with VariZoom's new lightweight, thickly-padded Soft Case. This heavy-duty case can also be purchased separately, and can be used for other jibs. Exterior 59x12x11; Interior 58x11x10; Weight 4.9 lbs. Hard Case is an optional upgrade (63x15, 20.5 lbs.)
€ 2374.05 incl. VAT
must be ordered - not in stock
VariZoom VZQUICKJIB2 camera crane with extension
QuickJib (Jib only) and Jib Extension ( Without Tripod and Dolly and Remotehead )
VZQUICKJIB2 CAMERA JIB CAMERA CRANE VariZoom s QuickJib represents the perfect balance of quality and economy in a well thought-out design. This is the answer for those who love all of the options of the SnapCrane, but aren t ready to spend that much. The Quick Jib gives you many of the features of the Snap Crane at a more affordable price. With the Quick Jib you get an economical, but secure captive clamp system for extending the jib, along with lanyard-attached stainless aircraft pins for quick assembly. The QuickJib is a professional, tool-free jib arm that assembles rapidly and safely. The QuickJib, like all of our products, was designed for years of trouble-free, reliable operation in the field. With attention to every detail, we have created a tool that will last generations with proper care.
Starting with the simplest package (jib only) up to our complete system (recommended), which includes dolly and tripod legs, you ll see that we consider safety to be the highest priority.
Jib Arm - The QuickJib selectively uses industrial powder coating and anodizing for durable cosmetics, with stainless steel fasteners throughout. The slim QuickJib outperforms the competition by having less air resistance in breezy conditions than jibs utilizing a four-arm support system (never use in high-wind conditions). The QuickJib will mount to any 100mm tripod, although we recommend only using non-telescoping legs for safety.
Additionally, our quick extension kit attaches in minutes with absolutely no tools, as opposed to more cumbersome systems that require multiple tools and bolts to attach their extensions. The extension kit mates to the standard QuickJib with our Captive Clamp Joint system, which uses two ergonomic, high-torque hand knobs to compress the captive clamps, assuring the joint is rock solid.
Brake System - VariZoom s Brake system utilizes a heavy-duty plate that is securely mounted to the pivot section. Brake compression system is built into the left stator of the pan/tilt base and designed to add significant variable drag, but forgiving enough to slide under extreme force that could otherwise topple a locking-brake jib system.
Locking Pins - Locking stainless aircraft pins of high quality and strength are used at the pivot points, and they are attached by lanyard to prevent them from ever being lost.
Tilting Mechanisms - Camera platform and tilt base join to the jib arm with stainless aircraft pins that insert through sealed radial ball bearings at the tilt base and high-performance sleeve bearings at the camera platform, resulting in silent, smooth motion. The camera platform also has a built-in spirit level for quick reference and adjustment.
Telescoping Counterweight Section - Telescoping weight arm adjusts up to 3 feet for tremendous flexibility. Extend the arm to reduce the amount of weight needed, shorten it to work in tighter spaces, or simply adjust it to fine-tune the counterbalance.
DCR100 Dolly (optional, not included with this kit) - Our heavy-duty dolly has an ample spread and a positive leg-locking system that securely captures our TCR100 crane tripod.
TCR100 Crane Tripod (optional, not included with this kit) - Our custom-built crane tripod is the only tripod we recommend for use with any crane, no matter the brand. We recommend you never use a telescoping or collapsible tripod under a crane, no matter how small. When supporting an expensive camera on a jib elevated above other valuable equipment or people, it is simply a no-brainer to eliminate all risk and use a single-section tripod instead of a telescoping type.
The TCR100 crane tripod is machined and built in-house and specifically designed to be used in combination with the DCR100 dolly. Safety & strength are top priorities: the TCR100 uses a solid machined (not molded) base-plate and fittings for strength and precision, specialty heavy-gauge tubing, and oversize leveling feet for an ultra-stable design that will never falter or fail when used properly with the DCR100 dolly.
VariZoom jibs are professional tools with quick setup, long-term reliability, and outstanding performance. Look closely to see the finer details of our thoughtful design, including tool-free assembly and stainless quick-release pins attached by lanyard so they ll never be lost. Scroll down to see how VariZoom takes your investment seriously.
New: The QuickJib comes with VariZoom s new lightweight, thickly-padded Soft Case. This heavy-duty case can also be purchased separately, and can be used for other jibs. Exterior 59?x12?x11?; Interior 58?x11?x10?; Weight 4.9 lbs. Hard Case is an optional upgrade (63?x15?, 20.5 lbs.)
€ 3326.05 incl. VAT
Available soon - please send request for reservation
VariZoom VZQUICKJIB2KIT camera crane with extension
VZQUICKJIB2KIT CAMERA JIB CAMERA CRANE
THIS KIT INCLUDE THE BASIC JIB, THE EXTENSION, THE DOLLY AND THE TRIPOD
VariZoom s QuickJib represents the perfect balance of quality and economy in a well thought-out design. This is the answer for those who love all of the options of the SnapCrane, but aren t ready to spend that much. The Quick Jib gives you many of the features of the Snap Crane at a more affordable price. With the Quick Jib you get an economical, but secure captive clamp system for extending the jib, along with lanyard-attached stainless aircraft pins for quick assembly. The QuickJib is a professional, tool-free jib arm that assembles rapidly and safely. The QuickJib, like all of our products, was designed for years of trouble-free, reliable operation in the field. With attention to every detail, we have created a tool that will last generations with proper care.
Starting with the simplest package (jib only) up to our complete system (recommended), which includes dolly and tripod legs, you ll see that we consider safety to be the highest priority.
Jib Arm - The QuickJib selectively uses industrial powder coating and anodizing for durable cosmetics, with stainless steel fasteners throughout. The slim QuickJib outperforms the competition by having less air resistance in breezy conditions than jibs utilizing a four-arm support system (never use in high-wind conditions). The QuickJib will mount to any 100mm tripod, although we recommend only using non-telescoping legs for safety.
Additionally, our quick extension kit attaches in minutes with absolutely no tools, as opposed to more cumbersome systems that require multiple tools and bolts to attach their extensions. The extension kit mates to the standard QuickJib with our Captive Clamp Joint system, which uses two ergonomic, high-torque hand knobs to compress the captive clamps, assuring the joint is rock solid.
Brake System - VariZoom s Brake system utilizes a heavy-duty plate that is securely mounted to the pivot section. Brake compression system is built into the left stator of the pan/tilt base and designed to add significant variable drag, but forgiving enough to slide under extreme force that could otherwise topple a locking-brake jib system.
Locking Pins - Locking stainless aircraft pins of high quality and strength are used at the pivot points, and they are attached by lanyard to prevent them from ever being lost.
Tilting Mechanisms - Camera platform and tilt base join to the jib arm with stainless aircraft pins that insert through sealed radial ball bearings at the tilt base and high-performance sleeve bearings at the camera platform, resulting in silent, smooth motion. The camera platform also has a built-in spirit level for quick reference and adjustment.
Telescoping Counterweight Section - Telescoping weight arm adjusts up to 3 feet for tremendous flexibility. Extend the arm to reduce the amount of weight needed, shorten it to work in tighter spaces, or simply adjust it to fine-tune the counterbalance.
DCR100 Dolly - Our heavy-duty dolly has an ample spread and a positive leg-locking system that securely captures our TCR100 crane tripod.
TCR100 Crane Tripod - Our custom-built crane tripod is the only tripod we recommend for use with any crane, no matter the brand. We recommend you never use a telescoping or collapsible tripod under a crane, no matter how small. When supporting an expensive camera on a jib elevated above other valuable equipment or people, it is simply a no-brainer to eliminate all risk and use a single-section tripod instead of a telescoping type.
The TCR100 crane tripod is machined and built in-house and specifically designed to be used in combination with the DCR100 dolly. Safety & strength are top priorities: the TCR100 uses a solid machined (not molded) base-plate and fittings for strength and precision, specialty heavy-gauge tubing, and oversize leveling feet for an ultra-stable design that will never falter or fail when used properly with the DCR100 dolly.
VariZoom jibs are professional tools with quick setup, long-term reliability, and outstanding performance. Look closely to see the finer details of our thoughtful design, including tool-free assembly and stainless quick-release pins attached by lanyard so they ll never be lost. Scroll down to see how VariZoom takes your investment seriously.
New: The QuickJib comes with VariZoom s new lightweight, thickly-padded Soft Case. This heavy-duty case can also be purchased separately, and can be used for other jibs. Exterior 59?x12?x11?; Interior 58?x11?x10?; Weight 4.9 lbs. Hard Case is an optional upgrade (63?x15?, 20.5 lbs).
€ 5468.05 incl. VAT
Available soon - please send request for reservation
VariZoom VZQJ2K-CPJ Camera Jib with Cinema Jr Remotehead
VZQJ2K-CPJ Quick Jib Camera Crane + CinemaProJR-K4 remote head - VariZoom's QuickJib represents the perfect balance of quality and economy in a well thought-out design. This is the answer for those who love all of the options of the SnapCrane, but aren't ready to spend that much. The Quick Jib gives you many of the features of the Snap Crane at a more affordable price. With the Quick Jib you get an economical, but secure captive clamp system for extending the jib, along with lanyard-attached stainless aircraft pins for quick assembly. The QuickJib is a professional, tool-free jib arm that assembles rapidly and safely. The QuickJib, like all of our products, was designed for years of trouble-free, reliable operation in the field. With attention to every detail, we have created a tool that will last generations with proper care.
CinemaPro Jr Remote Head w/ Deluxe Pro Joystick Controller
With our ergonomic Jibstick Pro controller, the Cinema Pro JR-K4 offers high-performance pan/tilt/zoom/focus in an incredibly user-friendly package. With all the speed and stability of the advanced motion control kits, but no menus or complex settings, and far fewer buttons and options, the Cinema Pro JR-K4 goes to work with minimal training and setup. At only 13 pounds, the CP Jr is ideal for cranes and portable remote applications, and its superior programming capability and rock-solid electromechanical performance make it a perfect upgrade for the low-tech heads found on most jib systems. The enclosed, slip-ring based drivetrain provides no-maintenance, reliable performance in nearly any environment. The K4 control offers a professional long-throw joystick mounted in a palmrest housing, on-the-fly custom motion limits, integral lens control via plug-in pistol-grip zoom/focus remote, speed & smoothing control, motor disable, pan/tilt/zoom/focus direction switches, & USB interface for advanced setup and firmware updates. This kit includes CP Jr head, Jibstick Pro, plug-in zoom/focus control, 50' control cable, AC adapter, 30' XLR power extension, waterproof hard carrying case.
-Professional Long-Throw Joystick for Pan & Tilt
-Included plug-in hand control for zoom & focus
-Independent speed control for pan & tilt
-Smoothing control for pan & tilt
-Set independent motion limits for pan and tilt to limit rotation, preset location marks, or lock position
-Motor disable switch
-Motor direction switch for pan/tilt/zoom/focus
-USB interface for firmware updates and PC-compatible GUI control panel
-GUI control panel allows setup of lens parameters, joystick deadband, and other advanced features
-2500' max std extension, longer w/ fiber optic option
-Wireless Option available
-Built-In Lens control for Fuji/Canon/Preston
-Extremely rigid for smooth motion @ telephoto
-Also compatible with TOC lens control systems
-Extremely Rigid Build w/ 100mm or Mitchell Mount
-Pan-base slip-ring for continuous 360° motion
-High-power Enclosed Drivetrain Allows Dynamic Moves
-System can be upgraded with Advanced Console for additional features
Jib Arm - The QuickJib selectively uses industrial powder coating and anodizing for durable cosmetics, with stainless steel fasteners throughout. The slim QuickJib outperforms the competition by having less air resistance in breezy conditions than jibs utilizing a four-arm support system (never use in high-wind conditions). The QuickJib will mount to any 100mm tripod, although we recommend only using non-telescoping legs for safety.
Additionally, our quick extension kit attaches in minutes with absolutely no tools, as opposed to more cumbersome systems that require multiple tools and bolts to attach their extensions. The extension kit mates to the standard QuickJib with our Captive Clamp Joint system, which uses two ergonomic, high-torque hand knobs to compress the captive clamps, assuring the joint is rock solid.
Brake System - VariZoom's Brake system utilizes a heavy-duty plate that is securely mounted to the pivot section. Brake compression system is built into the left stator of the pan/tilt base and designed to add significant variable drag, but forgiving enough to slide under extreme force that could otherwise topple a locking-brake jib system.
Locking Pins - Locking stainless aircraft pins of high quality and strength are used at the pivot points, and they are attached by lanyard to prevent them from ever being lost.
Tilting Mechanisms - Camera platform and tilt base join to the jib arm with stainless aircraft pins that insert through sealed radial ball bearings at the tilt base and high-performance sleeve bearings at the camera platform, resulting in silent, smooth motion. The camera platform also has a built-in spirit level for quick reference and adjustment.
Telescoping Counterweight Section - Telescoping weight arm adjusts up to 3 feet for tremendous flexibility. Extend the arm to reduce the amount of weight needed, shorten it to work in tighter spaces, or simply adjust it to fine-tune the counterbalance.
DCR100 Dolly - Our heavy-duty dolly has an ample spread and a positive leg-locking system that securely captures our TCR100 crane tripod.
TCR100 Crane Tripod - Our custom-built crane tripod is the only tripod we recommend for use with any crane, no matter the brand. We recommend you never use a telescoping or collapsible tripod under a crane, no matter how small. When supporting an expensive camera on a jib elevated above other valuable equipment or people, it is simply a no-brainer to eliminate all risk and use a single-section tripod instead of a telescoping type.
The TCR100 crane tripod is machined and built in-house and specifically designed to be used in combination with the DCR100 dolly. Safety & strength are top priorities: the TCR100 uses a solid machined (not molded) base-plate and fittings for strength and precision, specialty heavy-gauge tubing, and oversize leveling feet for an ultra-stable design that will never falter or fail when used properly with the DCR100 dolly.
VariZoom jibs are professional tools with quick setup, long-term reliability, and outstanding performance. Look closely to see the finer details of our thoughtful design, including tool-free assembly and stainless quick-release pins attached by lanyard so they'll never be lost. Scroll down to see how VariZoom takes your investment seriously.
New: The QuickJib comes with VariZoom's new lightweight, thickly-padded Soft Case. This heavy-duty case can also be purchased separately, and can be used for other jibs. Exterior 59x12x11; Interior 58x11x10; Weight 4.9 lbs. Hard Case is an optional upgrade (63x15, 20.5 lbs.)
€ 20224.05 incl. VAT
Available soon - please send request for reservation
VariZoom VZQUICKJIBKIT-50 camera crane KIT
QuickJib Kit includes Jib, DCR100 Dolly, TCR100 tripod, and MC50 Pan/Tilt head
VZQUICKJIBKIT-50 CAMERA JIB CAMERA CRANE w/ VZMC50 remote head - VariZoom s QuickJib represents the perfect balance of quality and economy in a well thought-out design. This is the answer for those who love all of the options of the SnapCrane, but aren t ready to spend that much. The Quick Jib gives you many of the features of the Snap Crane at a more affordable price. With the Quick Jib you get an economical, but secure captive clamp system for extending the jib, along with lanyard-attached stainless aircraft pins for quick assembly. The QuickJib is a professional, tool-free jib arm that assembles rapidly and safely. The QuickJib, like all of our products, was designed for years of trouble-free, reliable operation in the field. With attention to every detail, we have created a tool that will last generations with proper care.
VZMC50 remote head
Precision CNC machining, top-shelf components, rigorous parts inspection, and thorough individual unit testing ensure grade A quality. Borrowing from the design of our classic best-selling MC100, the MC50 is a compact, lower-cost, lighter head for the latest generation of small HD cameras. Built upon a sterling reputation for bulletproof, high-performance remote pan/tilt heads, we back the MC50 with our full two-year warranty.
VZQUICKJIBKIT
Jib Arm - The QuickJib selectively uses industrial powder coating and anodizing for durable cosmetics, with stainless steel fasteners throughout. The slim QuickJib outperforms the competition by having less air resistance in breezy conditions than jibs utilizing a four-arm support system (never use in high-wind conditions). The QuickJib will mount to any 100mm tripod, although we recommend only using non-telescoping legs for safety.
Additionally, our quick extension kit attaches in minutes with absolutely no tools, as opposed to more cumbersome systems that require multiple tools and bolts to attach their extensions. The extension kit mates to the standard QuickJib with our Captive Clamp Joint system, which uses two ergonomic, high-torque hand knobs to compress the captive clamps, assuring the joint is rock solid.
Brake System - VariZoom s Brake system utilizes a heavy-duty plate that is securely mounted to the pivot section. Brake compression system is built into the left stator of the pan/tilt base and designed to add significant variable drag, but forgiving enough to slide under extreme force that could otherwise topple a locking-brake jib system.
Locking Pins - Locking stainless aircraft pins of high quality and strength are used at the pivot points, and they are attached by lanyard to prevent them from ever being lost.
Tilting Mechanisms - Camera platform and tilt base join to the jib arm with stainless aircraft pins that insert through sealed radial ball bearings at the tilt base and high-performance sleeve bearings at the camera platform, resulting in silent, smooth motion. The camera platform also has a built-in spirit level for quick reference and adjustment.
Telescoping Counterweight Section - Telescoping weight arm adjusts up to 3 feet for tremendous flexibility. Extend the arm to reduce the amount of weight needed, shorten it to work in tighter spaces, or simply adjust it to fine-tune the counterbalance.
DCR100 Dolly - Our heavy-duty dolly has an ample spread and a positive leg-locking system that securely captures our TCR100 crane tripod.
TCR100 Crane Tripod - Our custom-built crane tripod is the only tripod we recommend for use with any crane, no matter the brand. We recommend you never use a telescoping or collapsible tripod under a crane, no matter how small. When supporting an expensive camera on a jib elevated above other valuable equipment or people, it is simply a no-brainer to eliminate all risk and use a single-section tripod instead of a telescoping type.
The TCR100 crane tripod is machined and built in-house and specifically designed to be used in combination with the DCR100 dolly. Safety & strength are top priorities: the TCR100 uses a solid machined (not molded) base-plate and fittings for strength and precision, specialty heavy-gauge tubing, and oversize leveling feet for an ultra-stable design that will never falter or fail when used properly with the DCR100 dolly.
VariZoom jibs are professional tools with quick setup, long-term reliability, and outstanding performance. Look closely to see the finer details of our thoughtful design, including tool-free assembly and stainless quick-release pins attached by lanyard so they ll never be lost. Scroll down to see how VariZoom takes your investment seriously.
New: The QuickJib comes with VariZoom s lightweight, thickly-padded Soft Case. This heavy-duty case can also be purchased separately, and can be used for other jibs. Exterior 59?x12?x11?; Interior 58?x11?x10?; Weight 4.9 lbs. Hard Case is an optional upgrade (63?x15?, 20.5 lbs.)
on request
VariZoom VZQUICKJIB2KIT-50 camera jib tripod dolly head
QuickJib Kit includes jib w/ Extension, DCR100 Dolly , TCR100 Tripod, & MC50 Pan/Tilt head
VZQUICKJIB2KIT-50 CAMERA JIB CAMERA CRANE w/ VZMC50 remote head VariZoom s QuickJib represents the perfect balance of quality and economy in a well thought-out design. This is the answer for those who love all of the options of the SnapCrane, but aren t ready to spend that much. The Quick Jib gives you many of the features of the Snap Crane at a more affordable price. With the Quick Jib you get an economical, but secure captive clamp system for extending the jib, along with lanyard-attached stainless aircraft pins for quick assembly. The QuickJib is a professional, tool-free jib arm that assembles rapidly and safely. The QuickJib, like all of our products, was designed for years of trouble-free, reliable operation in the field. With attention to every detail, we have created a tool that will last generations with proper care.
VZMC50 remote head
Precision CNC machining, top-shelf components, rigorous parts inspection, and thorough individual unit testing ensure grade A quality. Borrowing from the design of our classic best-selling MC100, the MC50 is a compact, lower-cost, lighter head for the latest generation of small HD cameras. Built upon a sterling reputation for bulletproof, high-performance remote pan/tilt heads, we back the MC50 with our full two-year warranty.
VZQUICKJIB2KIT
Jib Arm - The QuickJib selectively uses industrial powder coating and anodizing for durable cosmetics, with stainless steel fasteners throughout. The slim QuickJib outperforms the competition by having less air resistance in breezy conditions than jibs utilizing a four-arm support system (never use in high-wind conditions). The QuickJib will mount to any 100mm tripod, although we recommend only using non-telescoping legs for safety.
Additionally, our quick extension kit attaches in minutes with absolutely no tools, as opposed to more cumbersome systems that require multiple tools and bolts to attach their extensions. The extension kit mates to the standard QuickJib with our Captive Clamp Joint system, which uses two ergonomic, high-torque hand knobs to compress the captive clamps, assuring the joint is rock solid.
Brake System - VariZoom s Brake system utilizes a heavy-duty plate that is securely mounted to the pivot section. Brake compression system is built into the left stator of the pan/tilt base and designed to add significant variable drag, but forgiving enough to slide under extreme force that could otherwise topple a locking-brake jib system.
Locking Pins - Locking stainless aircraft pins of high quality and strength are used at the pivot points, and they are attached by lanyard to prevent them from ever being lost.
Tilting Mechanisms - Camera platform and tilt base join to the jib arm with stainless aircraft pins that insert through sealed radial ball bearings at the tilt base and high-performance sleeve bearings at the camera platform, resulting in silent, smooth motion. The camera platform also has a built-in spirit level for quick reference and adjustment.
Telescoping Counterweight Section - Telescoping weight arm adjusts up to 3 feet for tremendous flexibility. Extend the arm to reduce the amount of weight needed, shorten it to work in tighter spaces, or simply adjust it to fine-tune the counterbalance.
DCR100 Dolly - Our heavy-duty dolly has an ample spread and a positive leg-locking system that securely captures our TCR100 crane tripod.
TCR100 Crane Tripod - Our custom-built crane tripod is the only tripod we recommend for use with any crane, no matter the brand. We recommend you never use a telescoping or collapsible tripod under a crane, no matter how small. When supporting an expensive camera on a jib elevated above other valuable equipment or people, it is simply a no-brainer to eliminate all risk and use a single-section tripod instead of a telescoping type.
The TCR100 crane tripod is machined and built in-house and specifically designed to be used in combination with the DCR100 dolly. Safety & strength are top priorities: the TCR100 uses a solid machined (not molded) base-plate and fittings for strength and precision, specialty heavy-gauge tubing, and oversize leveling feet for an ultra-stable design that will never falter or fail when used properly with the DCR100 dolly.
VariZoom jibs are professional tools with quick setup, long-term reliability, and outstanding performance. Look closely to see the finer details of our thoughtful design, including tool-free assembly and stainless quick-release pins attached by lanyard so they ll never be lost. Scroll down to see how VariZoom takes your investment seriously.
New: The QuickJib comes with VariZoom s new lightweight, thickly-padded Soft Case. This heavy-duty case can also be purchased separately, and can be used for other jibs. Exterior 59?x12?x11?; Interior 58?x11?x10?; Weight 4.9 lbs. Hard Case is an optional upgrade (63?x15?, 20.5 lbs.)
on request
VariZoom VZMZB - Zoom remote for VariZoom HD-Monitors
This unique remote will improve any shooter's ability to focus with confidence. One push of the button activates pixel-to-pixel mode, effectively magnifying the center of the image so that focusing is more easily accomplished by revealing the fine details up close and personal. A second push of the button activates peaking mode, wherein a fine white outline on the objects in frame further enhances the shooter's ability to nail focus accurately. These features greatly reduce eye strain and provide consistent focus assist. Activating these modes on other monitors requires reaching up to the monitor to press an onboard button - the VZMZB allow you to do so from the tripod handle or shoulder rig grip for instant, seamless transitions. The VZMZB is an indispensable accessory for shooters who need to focus manually, especially those using shallow DOF cameras.
€ 36.94 incl. VAT
in stock
VariZoom VZM7 7 inch HDMI monitor 1024x600 pixel
7 screen size HDMI In / Out (loop through) 1024x600 resolution Accepts all signals up to 1080p Headphone 3.5mm (out), Zoom (in) 3.5mm, XLR power (4+, 1-) Includes: Monitor, power supply, HDMI cable
• Accepts all HD signals up to 1080p
• HDMI In / Out (loop through)
• DSLR Scaling to allow full-screen viewing of image from cameras such as Canon 5D
• Auto Aspect Ratio Detection
• Monochrome (B&W) mode
• Image Flip for inverted mounting
• Safety Area markers (5 levels), Centerline Marker, 4:3 area markers
• Underscan and Overscan modes
• Color Temperature Presets (D65 and D93 standards), or user-defined through RGB settings
• Brightness, Contrast, Saturation, Sharpness adjustments
• Customizable Menu Options for menu duration, position, text color and language
• Headphone jack for audio monitoring
• Pixel-to-Pixel Zoom and Peaking for Focus Assist with OPTIONAL VZMZB Remote
The VZ-M7 HDMI monitor provides sharp, accurate images for improved framing and focus assist on any camera equipped with an HDMI output. Utilizing top-quality Grade A+ LCD panels and image processing, the M7 offers picture quality and a feature set normally found only on more expensive monitors. Included with the basic M7 kit: monitor, HDMI cable and AC power adapter. A number of optional accessories designed specifically for the M7 are available through VariZoom.
€ 348.61 incl. VAT
in stock
VariZoom VZ-M5/M7 battery plate Canon BP (VZMBPC)
Canon battery plate BP series for VZM5 and VZM7 monitors.
This battery plate allows you to power VZM5 and VZM7 monitors using the widely available Canon BP type batteries (e.g., BP-945, BP-930). Buy this plate as an upgrade to your VZM7 or VZM5 monitor and run it using your existing Canon batteries, or purchase a VZDBC charger and S8945 battery from VariZoom for a portable monitor power solution. The plate attaches easily with a few phillips screws and no technical installation.
€ 36.94 incl. VAT
only 2 stock
VariZoom VZ-M5/M7 battery plate Panasonic VZ-M-BPP
Panasonic battery plate (D54) for VZM5 and VZM7 monitors.
This battery plate allows you to power VZM5 and VZM7 monitors using Panasonic camcorder batteries (e.g., CGA-D54). Buy this plate as an upgrade to your VZM7 or VZM5 monitor and run it using your existing Panasonic batteries, or purchase a VZDBC charger and S8D62 battery from VariZoom for a portable monitor power solution. The plate attaches easily with a few phillips screws and no technical installation.
€ 36.94 incl. VAT
in stock
VariZoom VZM5/M7 battery plate Sony L VZ-MBPS
This battery plate allows you to power VZM5 and VZM7 monitors using the widely available Sony L series batteries (e.g., NP-F970, NP-F770). Buy this plate as an upgrade to your VZM7 or VZM5 monitor and run it using your existing Sony L batteries, or purchase a VZMCH charger and S8972 battery from VariZoom for a portable monitor power solution. The plate attaches easily with a few phillips screws and no technical installation.
€ 36.94 incl. VAT
only 2 stock
VariZoom VZ-M5/M7 VZMLOCK HDMI cable lock
The tendency of HDMI connectors to come unseated has always been a problem for portable applications. These innovative HDMI locks allow you to fix the connectors in place on your VZM5 or VZM7 monitors and avoid any uncertainty about the integrity of your signal connection. They also help to prevent the dreaded connector damage that can happen to an HDMI connector when the cable is yanked or bent suddenly. An absolute must for on-the-go shooters. Buy one if you only use the HDMI input or two if you use the input and output.
€ 20.38 incl. VAT
in stock
VariZoom VZM5RC - protector for monitor VZM5
Rubber case Protector for VZ-M5
This rubber case protector for the VZM5 monitor helps to prevent damage caused by impact and the rigors of field use.
This high-quality, carefully designed case protector will extend the lifespan of your M5 monitor without interfering with any of the functions of the monitor. Especially useful for run & gun scenarios where the monitor is tossed in a bag without additional protection, the VZM5-RC is a smart investment that adds minimal bulk and weight. When used in conjunction with a VZM5-HD sunhood/screen protector, the monitor becomes extremely rugged and field-ready.
€ 49.66 incl. VAT
only 2 stock
VariZoom VZM7HD - Sun Hood for M7 monitor
This unique design shields the M7 screen from the sun and from damage. The folding design and hard construction offer superb protection during transport and storage. The hood mechanism opens and closes quickly with no tools and allows viewing even in the brightest sunlight.
€ 49.66 incl. VAT
must be ordered - not in stock
VariZoom VZM7K - 7 inch monitor complete kit with case
VZM7 monitor deluxe kit with sunhood/screen protector, Sony L series battery plate, high-capacity battery (6 hrs), charger, hard carrying case, swivel shoe mount, HDMI cable locks, remote zoom button for focus assist, 2 HDMI cables (standard-standard & standard-mini), AC adapter.
This kit includes everything you need for monitoring your video productions. Starting with our ultra-sharp VZM7 monitor for accurate representation of your video feed, this kit includes accessories and features you won't find anywhere else. (Unboxing Video below) The collapsible sunhood/screen protector offers a professional look, excellent viewing outdoors, and superior protection during storage & transport. The high-capacity battery system will keep your monitor running for up to 6 hours. Pre-mounted with the kit are a Sony L series battery plate and the extremely handy HDMI locks to prevent the cable from loosening or damaging the monitor connectors should the cable get yanked or bent. Also included are the swivel shoe mount for attaching the monitor to your camera and the foam-lined hard case that holds everything together and protects your investment. Last but not least is the innovative zoom button that allows you to remotely put the monitor in pixel-to-pixel and peaking modes for extremely accurate focusing. Buy this kit to save or purchase the accessories a la carte. Don't forget about our optional VZM7-RC rubber case protector to make your monitor stand up to the rigors of field use.
• VZM7 monitor w/ power supply and 2 HDMI cables (mini-std and std-std)
• Hard Sunhood/Screen Protector
• High Capacity L Series Battery 47Wh
• Compact Travel Charger
• Battery Plate Sony L Series (premounted)
• Remote Zoom Button for Focus Assist
• Swivel Shoe Mount for camera-top mounting
• 2 HDMI locks for In and Out
• Hard Case w/ foam lining
on request
VariZoom VZM7RC rubber protection for VZM7
Rubber case Protector for VZ-M7
€ 49.66 incl. VAT
in stock
VariZoom VZTFT7 - 7 inch Videomonitor
7 inch 16:9 Monitor (NTSC/PAL) w/ Video Cable and Universal Power Supply
€ 253.41 incl. VAT
only 2 stock
VariZoom VZ-M5 KIT ( VZM5K ) 5 inch HDMI monitor
VZM5 monitor deluxe kit with sunhood/screen protector, Sony L series battery plate, high-capacity battery (6 hrs), charger, soft case, swivel shoe mount, HDMI cable locks (2), remote zoom button for focus assist, AC adapter, 2 HDMI cables (standard-standard & standard-mini).
This kit includes everything you need for monitoring your video productions. Starting with our ultra-sharp VZM5 monitor for accurate representation of your video feed, this kit includes accessories and features you won't find anywhere else.
The collapsible sunhood/screen protector offers a professional look, excellent viewing outdoors, and superior protection during storage & transport. The high-capacity battery system will keep your monitor running for 6 hours or more. Pre-mounted with the kit are a Sony L series battery plate and the extremely handy HDMI locks to prevent the cable from loosening or damaging the monitor connectors should the cable get yanked or bent. Also included are the swivel shoe mount for attaching the monitor to your camera and the padded carrying case that holds everything together and protects your investment.
Last but not least is the innovative zoom button that allows you to remotely put the monitor in pixel-to-pixel and peaking modes for extremely accurate focusing.
Buy this kit to save or purchase the accessories a la carte. Don't forget about our optional VZM5-RC rubber case protector to make your monitor stand up to the rigors of field use.
VZM5 monitor w/ power supply and 2 HDMI cables (mini-std and std-std)
Hard Sunhood/Screen Protector
High Capacity L Series Battery 47Wh
Compact Travel Charger
Battery Plate Sony L Series (premounted)
Remote Zoom Button for Focus Assist
Swivel Shoe Mount for camera-top mounting
2 HDMI locks for In and Out
Soft Case w/ Carrying straps
Accepts all HD signals up to 1080p
HDMI In / Out (loop through)
DSLR Scaling to allow full-screen viewing of image from cameras such as Canon 5D
Auto Aspect Ratio Detection
Monochrome (B&W) mode
Image Flip for inverted mounting (1/4 -20 mounts on top and bottom of monitor)
Safety Area markers (5 levels), Centerline Marker, 4:3 area markers
Underscan and Overscan modes
Color Temperature Presets (D65 and D93 standards), or user-defined through RGB settings
Brightness, Contrast, Saturation, Sharpness adjustments
Customizable Menu Options for menu duration, position, text color and language
Headphone jack for audio monitoring
Pixel-to-Pixel Zoom and Peaking for Focus Assist
€ 399.00 incl. VAT
only 2 in stock
VariZoom VZTFT 5.6 - Composite video Monitor
PAL/NTSC Videomonitor 5.6 inch
€ 149.00 incl. VAT
in stock
VariZoom VZTFT5.6KIT - video monitor 5.6 inch kit
The VZ-TFT-U Kit Includes: VZ-TFT | Color TFT Monitor 5.6 * VZ-702-M | Battery/Charger Kit NEW! * VZ-HD56 | Custom Sun Hood * VZ-Shoe | Swivel Shoe Mount * VZ-CC | Custom Nylon Case
€ 179.00 incl. VAT
in stock
VariZoom VZTFT 5.6 Dual-Rackmount 19 inch rack
PAL/NTSC Videomonitor 5.6 inch 2 x in a 19 inch Rackmount
Special sale until sold out !
€ 249.00 incl. VAT
in stock
VariZoom VZHD7 sundshield monitors 7 inch 16 to 9
Sunhood for VZ-TFT-7 16:9 Monitor
€ 19.09 incl. VAT
must be ordered - not in stock
VariZoom VZM5HD - sunhood for VZM5
This unique design shields the M5 screen from the sun and from damage. The folding design and hard construction offer superb protection during storage and transport. The hood mechanism opens and closes quickly with no tools and allows viewing even in the brightest sunlight.
€ 47.48 incl. VAT
must be ordered - not in stock
VariZoom VZMCC - System case VZM7 Monitor
Special case fit to the VariZoom HD Monitor M7
€ 66.65 incl. VAT
in stock
VariZoom VZHD-56 Sunshield 5.6 inch monitors
VariZoom VZHD-56
Sun visor for TFT monitors up to 5.6 inches in 4: 3 format
€ 36.27 incl. VAT
in stock
VariZoom VZCC - Padded Monitor Bag up to 7 inch
The VZ-CC is a custom designed case to hold both the 5.6 in. and 7 in. TFT monitors. All monitor accessories fit securely within the case. Two adjustable straps are included and can be used to body mount the case with monitor.
€ 38.14 incl. VAT
must be ordered - not in stock
VariZoom VZCON7DUAL 2 x TFT7 DUAL Rackmount Monitor
2 x 7 inch Monitor in 19 inch Rackmount
€ 1144.76 incl. VAT
must be ordered - not in stock
VariZoom VZTFT7U - monitor kit with battery system and mount
Ultimate 16:9 On-Camera Kit w/ VZ-TFT-7, Case, 702M Battery Kit, Shoe, Sunhood
€ 418.95 incl. VAT
only 2 stock
Varizoom CinemaPro Control cable - 50 ft VZCP-C02
CinemaPro Control cable - 50 ft
€ 444.76 incl. VAT
in stock
VariZoom VZMC50 Remotehead for cameras up to 5.5 Kg
Pan and tilt head for cameras weighing up to 5.5 kg
Equipped with the same control and motors as the MC100, the MC-50 is lighter in construction and is used for current DV / HDV cameras!
Weight 3.75 kg
Precision CNC machining, top-shelf components, rigorous parts inspection, and thorough individual unit testing ensure grade A quality. Borrowing from the design of our classic best-selling MC100, the MC50 is a compact, lower-cost, lighter head for the latest generation of small HD cameras. Built upon a sterling reputation for bulletproof, high-performance remote pan/tilt heads, we back the MC50 with our full two-year warranty.
€ 2594.50 incl. VAT
must be ordered - not in stock
VariZoom VZ-MC100-CASE
New Waterproof Compact Hard Case for MC100
€ 338.02 incl. VAT
must be ordered - not in stock
VariZoom River Control Console - 4 camera x 7-axis
Perfect for multi-camera systems in churches, auditoriums, concerts and other live events, this new system is the result of years of motion control design expertise. Control up to four 7-axis remote camera systems using the touchscreen interface at a frame-accurate level for repeat-pass, live control, and variable-speed playback. Each of the 4 remote systems can run independently or simultaneously and accommodate pan, tilt, zoom, focus, iris, track and boom axes. The River console is the most cost-effective way to accurately control 4 remote camera systems at a cinematic or broadcast level.
• Control up to 4 remote camera systems - Pan / Tilt / Zoom / Focus / Iris / Track/Dolly / Boom
• Works with existing CinemaPro and CP JR heads, as well as new CP Micro
• Touchscreen control interface for intuitive operation (with tilting feature)
• Redundant backlit buttons for alternative control method
• Onboard control input devices include: joystick for pan/tilt, thumbwheel-joystick for track, encoder dial for iris, rocker for zoom, large focus wheel, speed dial / assignable dial. All input devices are re-assignable.
• Extensive I/O complement: 10 serial ports (4 dedicated to heads, 6 assignable for track drive, ZFI hand units, etc.), 6 encoder ports (2 dedicated to wheels/panbars, 4 free), 4 analog ports (foot pedal, analog zoom/focus, etc.)
• Fully parametric setup for great flexibility and idiot-proofing
• Either one operator can control all 4 cameras or plug in peripheral joysticks slaved to the main console for multi-operator position-only control
• Robust fully-machined aluminum enclosure with a variety of built-in mounting options
• Utilizes only the best-quality components and software based on years of field operation
• Also available soon in a more compact single-camera 7-axis version for Pan/Tilt/Zoom/Focus/Iris/Track/Boom
€ 15556.28 incl. VAT
must be ordered - not in stock
VariZoom VZCINEMAPRO Fuses 6.3A F
Replacement backups for the VariZoom Cinema Pro Remote Head. These fuses can trip when the head is blocked.
€ 3.05 incl. VAT
more then 10 in stock
VariZoom VZ-CS1LK-DUAL - Dual remotehead - one Control
The CS1LK Dual system is a complete remote multi-camera control station that combines the MC100 pan/tilt heads, VZ-Rock zoom/focus/record control, 7 16:9 viewing monitors, and CS1 station frame.
A Powerful Tool The MC100 allows one operator complete motion control over two cameras a hundred or more feet apart. Great for weddings and event videographers as well as churches that simply want to record their services efficiently and professionally. VariZoom s MC100 remote heads have a long history of reliability, and they ve been built by the same manufacturing team for over 10 years. MC100 heads may be mounted on fixtures of walls, tripods and jib arms with years of trouble free operation. This workhorse has been used by video equipment rental houses around the world for years as proof that quality does count.
Quality Design and Construction Precision CNC machining, top-shelf components, rigorous parts inspection, and thorough individual unit testing ensure grade A quality. In production for years, the MC100 s original design has remained basically unchanged, but over the years customer feedback and engineering review have led to numerous refinements, including upgraded components and assembly techniques, to make the unit lighter, smoother and easier to operate. We back the MC100 with our full one-year warranty and lifetime technical support.
An Investment in Production Value While certainly not inexpensive, the MC100 s price is considerably lower than units of comparable quality and capability. The cost of renting a professional pan/tilt head alone makes it worth considering. With the MC100 at your disposal, productions become more expansive, dynamic, and high-end , so much so that every time you use it you are increasing not only the artistic quality of the work, but also its dollar-value to prospective clients.
Convenience The custom lightweight carrying case with die-cut foam insert will protect both MC100s for storage or transport via air or land. A modular architecture makes parts replacement and repair simple, and we are happy to consult with you about options to suit your needs.
System includes the following components
VZCS1 Control Station
Two VZMC100 Remote heads with Single Controller
Two VZ-M7 7? HDMI viewing monitors
VZRock -Remote Zoom and Focus Control for LANC Controled Cameras
Includes
• VZ-CS-1 deskFrame
• VZ-MC100 with Extra Head
• 2 x VZ-M7 monitors
• 1 x VZ-Rock LANC Controller
€ 6621.56 incl. VAT
must be ordered - not in stock
VariZoom VZCS1LK remotehead monitor and LANC controller
The CS1LK is a complete remote camera control station that combines the MC100 pan/tilt head, VZ-ProL zoom/focus/record control, 7 16:9 viewing monitor, and CS1 station frame. Includes VZ-CS-1; VZ-MC100, VZ-M7 monitor, and the VZ-Pro-L.
€ 4621.90 incl. VAT
product already ordered
VariZoom VZCINEMAPRO-VZCP-T35 mitchell Jimmy adapter
Custom made adapter allows Mitchell spud and nut to attach to Jimmy Jib style mount.
€ 522.41 incl. VAT
must be ordered - not in stock
VariZoom VZCINEMAPRO VZCP-T09 Zoom and Focus Option
Zoom/Focus controller attaches to tripod handles.
on request
VariZoom VZMC100 Remote Head for cameras up to 15Kg
The VariZoom MC100 is a remote head for cameras up to 15 kg.
This Remote Head comes with a carrying case, 110-220 Volt power supply, control box, various fasteners, cables, etc. - so it's ready for immediate use. Balancing the camera on the remote head is greatly simplified by freely adjustable X / Y axes.
With the Remote Head MC100, non-impact, full 360 ° shooting across two axes is possible. Both fast and slow movements can be steplessly controlled via the remote control of the MC100. All cables are center-centrally guided directly through the axes -> There is no imbalance as with some, comparable products.
Battery operation is also possible. For this please ask us which battery form is needed.
The Remote Head MC100 can be operated from 12-48 Volt!
Excellent for all cranes with a 100mm recording such. the VariZoom crane systems Quickjib, Snapcrane and the crane systems of EZFX.
€ 4159.05 incl. VAT
must be ordered - not in stock
VariZoom VZCINEMAPRO-VZCP-C12 Cable coupler
Couples CinemaPro control cables for extended length.
CinemaPro control cables can be extended up to 500'
on request
VariZoom VZ-MC100-CASE B-Stock
New Waterproof Compact Hard Case for MC100
B-Stock with slightly cutted foam inside
Custom hard case features: super-rugged waterproof design, ultra-compact form (40% smaller than before), 4-point positive-locking system, auto pressure-release valve (for air travel), comfort-grip handle, customized protective foam insert, pad-lockable, optional high comfort shoulder strap.
€ 199.00 incl. VAT
in stock
VariZoom VZCINEMAPRO-VZCP-T11 Wheels Option
on request
VariZoom VZCINEMAPRO-JR-K1 Remote Head with wheels
The VariZoom CinemaPro Junior Kit 1 ( VZCP-JR-K1 )
Main parts:
• Controller: Hand-Wheels
• Remote head for cameras up to 35 lbs.
• Advanced control console with joystick
CinemaPro Jr Remote Head w/ Cinema Hand Wheels
Paired with cinema-style hand wheels, the Cinema Pro Jr sets a new standard for value in true motion control. At only 13 pounds, the CP Jr is ideal for cranes and portable remote applications, and its superior programming capability and rock-solid electromechanical performance make it a perfect upgrade for the low-tech heads found on most jib systems. The enclosed, slip-ring based drivetrain provides no-maintenance, reliable performance in nearly any environment. This kit includes CP Jr head (100mm half-ball mount, Mitchell available), cinema-style hand-wheels control, limited-software advanced control console w/ joystick input, 50' control cable, AC adapter, 30' XLR power extension, and waterproof hard carrying case.
Utilizing our encoded hand wheels for fully independent, ultra-smooth pan & tilt, the CP JR-K1 offers cinema-grade motion control in a compact, user-friendly, affordable package. The Cinema Pro Jr borrows heavily from the acclaimed Cinema Pro master motion control system, and although it's scaled down about 35% in most respects, the CP Jr's baseline performance is remarkably close to that of its big brother. At only 13 pounds, the Cinema Pro Jr is ideal for jib and remote field applications, and its superior programming capability and rock-solid electromechanical performance make it a perfect upgrade for the low-tech heads found on most jib systems. The CP Jr sets up quickly with no twisting wires or tedious balancing process, and it's capable of extremely precise, repeatable movements at any speed. The CP Jr also performs extremely well as a high speed fixed-mount head or a feature-film quality motion control system for small to mid-scale productions.
Incorporating such high-end features as precision enclosed drivetrains, pan slip ring, recordable/repeatable motion control, built-in zoom/focus control, soft limits, and full parametric motion control settings, the CP Jr is unlike anything on the market at its price. Adding to its appeal is the seamless upgrade path for increased programming capability, multiple control input options, and compatibility with an array of existing Cinema Pro accessories. The Cinema Pro Jr is precision-made yet rugged and becoming the logical and affordable choice for a much broader scope of users than any head on the market. Cost effective not only for big budget motion pictures, but for worship facilities, sports, concerts, newsrooms,military,government, and other film, video, and HD applications.
Proudly Made in the USA, the CP Jr is constructed from body sections that are CNC machined from solid billet to exacting standards, so rigidity and structural integrity are second to none. The custom slip rings and robust motor drives are designed and tested intensively to perform flawlessly under the most demanding conditions, and the electronics & software have years of field testing behind them. Add to all this the painstaking assembly and QC done in our state-of-the-art facility, and you've got a motion control head of the highest caliber.
Standard Features
• Cinema-Style Hand Wheels for Fully Independent Pan & Tilt Control
• Built-In Zoom and Focus Control
• Console Joystick control for Pan, Tilt and Zoom; knob control for Focus
• Move between precise marks with variable speed/motion curves
• Record and playback a move up to 1hr
• Independently Programmable Max Speed for Pan & Tilt
• Independently Programmable Smoothing for Pan & Tilt
• Precise, Resettable Zero Point for Motion Referencing
• Up to 2500 feet between controller and head
• Custom Soft Limits for Pan and Tilt range of motion
• Fujinon, Canon and Preston serial and analog lens control
• Dynamic Zoom Compensation for extra smooth shots at telephoto
• Extremely Rigid Build w/ 100mm or Mitchell Mount
• Pan-base slip-ring for continuous 360° motion
• High-power Enclosed Drivetrain Allows Dynamic Moves
• Optional Intervalometer, Camera Sync, PC Data Share, Additional Marks & Takes
on request
VariZoom VZCINEMAPRO-JR-K2 Remote Head with PanBar
The VariZoom CinemaPro Junior Kit 2 ( VZCP-JR-K2 )
• Controller: Pan-Bars zoom/reset & focus hand controls
• For cameras up to 35 lbs.
• Advanced control console with joystick input
CinemaPro Jr Remote Head w/ Pan Bars
Paired with our broadcast-style encoded pan bars, the Cinema Pro Jr offers breathtaking performance and control in an intuitive package. At only 13 pounds, the CP Jr is ideal for cranes and portable remote applications, and its superior programming capability and rock-solid electromechanical performance make it a perfect upgrade for the low-tech heads found on most jib systems. The enclosed, slip-ring based drivetrain provides no-maintenance, reliable performance in nearly any environment. This kit includes CP Jr head (100mm half-ball mount, Mitchell available), pan bars control, limited-software advanced control console w/ joystick input, 50' control cable, AC adapter, 30' XLR power extension, waterproof hard carrying case.
Encoded Panbar
Our custom encoded pan bars behave just like an expensive fluid head, allowing broadcast operators, sports cameramen, and videographers to move the CP Jr with confidence and precision. User-adjustable control parameters offer an incredibly dynamic range of seamless pan/tilt/zoom/focus operability. The Cinema Pro Jr borrows heavily from the acclaimed Cinema Pro master motion control system, and although it's scaled down about 35% in most respects, the CP Jr's baseline performance is remarkably close to that of its big brother. At only 13 pounds, the Cinema Pro Jr is ideal for jib and remote field applications, and its superior programming capability and rock-solid electromechanical performance make it a perfect upgrade for the low-tech heads found on most jib systems. The CP Jr sets up quickly with no twisting wires or tedious balancing process, and it's capable of extremely precise, repeatable movements at any speed. The CP Jr also performs extremely well as a high speed fixed-mount head, a live broadcasting remote camera station, or a feature-film quality motion control system for small to mid-scale productions.
Solid and professional Quality
Incorporating such high-end features as precision enclosed drivetrain, pan slip ring, recordable/repeatable motion control, built-in zoom/focus control, soft limits, and full parametric motion control settings, the Cinema Pro Jr represents a new standard for lightweight, cost-effective pan & tilt motion control heads. Adding to its appeal is the seamless upgrade path for increased programming capability, multiple control input options, and compatibility with an array of existing Cinema Pro accessories. The Cinema Pro Jr is precision-made yet rugged and becoming the logical and affordable choice for a much broader scope of users than any head on the market. Cost effective not only for big budget motion pictures, but for worship facilities, sports, concerts, newsrooms,military,government, and other film, video, and HD applications.
Proudly Made in the USA, the CP Jr is constructed from body sections that are CNC machined from solid billet to exacting standards, so rigidity and structural integrity are second to none. The custom slip rings and robust motor drives are designed and tested intensively to perform flawlessly under the most demanding conditions, and the electronics & software have years of field testing behind them. Add to all this the painstaking assembly and QC done in our state-of-the-art facility, and you've got a motion control head of the highest caliber.
Give us a call, email, or visit one of our demo/rental showrooms in Southern California, Austin, or New York.
Standard Features
• Broadcast-Style Pan Bars for Seamless Pan/Tilt/Zoom/Focus Control
• Zoom and Focus Control Built into Head
• Console Joystick control for Pan, Tilt and Zoom; knob control for Focus
• Move between precise marks with variable speed/motion curves
• Record and playback a move up to 1hr
• Independently Programmable Max Speed for Pan & Tilt
• Independently Programmable Smoothing for Pan & Tilt
• Precise, Resettable Zero Point for Motion Referencing
• Up to 2500 feet between controller and head
• Custom Soft Limits for Pan and Tilt range of motion
• Fujinon, Canon and Preston serial and analog lens control
• Dynamic Zoom Compensation for extra smooth shots at telephoto
• Extremely Rigid Build w/ 100mm or Mitchell Mount
• Pan-base slip-ring for continuous 360° motion
• High-power Enclosed Drivetrain Allows Dynamic Moves
• Optional Intervalometer, Camera Sync, PC Data Share, Additional Marks & Takes
If any question to the system - give us a call +49 6855
on request
VariZoom VZCINEMAPRO-JR-K3 Remote Head w advancedJoystick
The CinemaPro Jr. K3 incl.
• Controller: Advanced control console
• For cameras up to 35 lbs.
• Limited-software advanced control console with joystick input
CinemaPro Jr Remote Head w/ Advanced Control Console
Built with powerful electronics and software, the Cinema Pro Jr allows operators to customize motion and lens parameters through our portable console and repeat ultra-slow or high-speed moves with absolute precision. At only 13 pounds, the CP Jr is ideal for cranes and portable remote applications, and its superior programming capability and rock-solid electromechanical performance make it a perfect upgrade for the low-tech heads found on most jib systems. The enclosed, slip-ring based drivetrain provides no-maintenance, reliable performance in nearly any environment. This kit includes CP Jr head (100mm half-ball mount, Mitchell available), limited-software advanced control console w/ joystick input, 50' control cable, AC adapter, 30' XLR power extension, waterproof hard carrying case.
With its menu-driven advanced control console and high performance head design, the Cinema Pro Jr can execute the most dynamic or subtle moves with total precision and playback capability. Pan, tilt, zoom and focus response can be individually customized for the finest control, and the system can be upgraded with additional software and hardware for extended capabilities. The Cinema Pro Jr borrows heavily from the acclaimed Cinema Pro master motion control system, and although it's scaled down about 35% in most respects, the CP Jr's baseline performance is remarkably close to that of its big brother. At only 13 pounds, the Cinema Pro Jr is ideal for jib and remote field applications, and its superior programming capability and rock-solid electromechanical performance make it a perfect upgrade for the low-tech heads found on most jib systems.The CP Jr sets up quickly with no twisting wires or tedious balancing process, and it's capable of extremely precise, repeatable movements at any speed. The CP Jr also performs extremely well as a high speed fixed-mount head or a feature-film quality motion control system for small to mid-scale productions.
Incorporating such high-end features as precision enclosed drivetrain, pan slip ring, recordable/repeatable motion control, built-in zoom/focus control, soft limits, and full parametric motion control settings, the Cinema Pro Jr represents a new standard for lightweight, cost-effective pan & tilt motion control heads. Adding to its appeal is the seamless upgrade path for increased programming capability, multiple control input options, and compatibility with an array of existing Cinema Pro accessories. The Cinema Pro Jr is precision-made yet rugged and becoming the logical and affordable choice for a much broader scope of users than any head on the market. Cost effective not only for big budget motion pictures, but for worship facilities, sports, concerts, newsrooms,military,government, and other film, video, and HD applications.
Proudly Made in the USA, the CP Jr is constructed from body sections that are CNC machined from solid billet to exacting standards, so rigidity and structural integrity are second to none. The custom slip rings and robust motor drives are designed and tested intensively to perform flawlessly under the most demanding conditions, and the electronics & software have years of field testing behind them. Add to all this the painstaking assembly and QC done in our state-of-the-art facility, and you've got a motion control head of the highest caliber.
Give us a call, email, or visit one of our demo/rental showrooms in Southern California, Austin, or New York.
Standard Features
Zoom and Focus Control Built into Head
Console Joystick control for Pan, Tilt and Zoom; knob control for Focus
Move between precise marks with variable speed/motion curves
Record and playback a move up to 1hr
Independently Programmable Max Speed for Pan & Tilt
Independently Programmable Smoothing for Pan & Tilt
Precise, Resettable Zero Point for Motion Referencing
Up to 2500 feet between controller and head
Custom Soft Limits for Pan and Tilt range of motion
Fujinon, Canon and Preston serial and analog lens control
Dynamic Zoom Compensation for extra smooth shots at telephoto
Extremely Rigid Build w/ 100mm or Mitchell Mount
Pan-base slip-ring for continuous 360° motion
High-power Enclosed Drivetrain Allows Dynamic Moves
Optional Intervalometer, Camera Sync, PC Data Share, Additional Marks & Takes
***english***
The CinemaPro Jr. K3 incl.
• Controller: Advanced Control Panel
• For cameras up to 35 lbs.
• Advanced control console with limited software and joystick input
CinemaPro Jr Remote Head with Advanced Control Console
Equipped with powerful electronics and software, the Cinema Pro Jr allows users to adjust the motion and lens parameters through our portable console and repeat ultra-slow or high-speed motion with absolute precision. At just 13 pounds, the CP Jr is ideal for cranes and portable remote applications. Its superior programming capabilities and solid electromechanical performance make it a perfect upgrade for the low-tech heads of most boom systems. The closed, slip-ring-based powertrain provides maintenance-free, reliable performance in virtually any environment. This kit includes a CP Jr head (100mm half-ball mount, Mitchell available), an advanced control panel with limited software and joystick input, a 50-inch control cable, a power adapter, a 30-inch XLR Power extension and a waterproof case.
With the menu-driven advanced control panel and powerful head design, the Cinema Pro Jr can perform the most dynamic or subtle movements with absolute precision and responsiveness. Pan, tilt, zoom and focus answers can be individually customized for the best control. The system can be upgraded with additional software and hardware for advanced features. The Cinema Pro Jr is heavily dependent on the renowned Cinema Pro Master motion control system. Although it has been reduced by about 35% in most areas, the basic performance of the CP Jr is remarkably close to that of its big brother. At just 13 pounds, the Cinema Pro Jr is ideal for jib and remote field applications. Its superior programming capabilities and solid electromechanical performance make it a perfect upgrade to the low-tech heads of most jib systems. The CP Jr set is fast, with no twisted wires or lengthy balancing, and is able to perform extremely precise, repeatable movements at any speed. The CP Jr is also ideal as a fixed high speed head or motion control system for movie quality for small to medium productions.
The Cinema Pro Jr features high-end features such as a precise, closed drive train, a pan-slip ring, recordable / repeatable motion control, built-in zoom / focus control, soft limits and full parametric motion control. cost-effective pan / tilt motion control heads. The seamless upgrade path adds programmability, multiple control input options, and compatibility with a range of existing Cinema Pro accessories. The Cinema Pro Jr is precision engineered yet robust. It's the logical and affordable choice for a much broader audience than anyone else in the marketplace. Cost-effective, not just for high-budget movies, but also for worship sites, sporting events, concerts, newsrooms, military, government agencies, and other film, video, and HD applications.
Proudly made in the USA, the CP Jr consists of body parts that are CNC machined from solid billet to high standards. Rigidity and structural integrity are second to none. The bespoke slip rings and rugged motor drives have been extensively designed and tested to function flawlessly under the most demanding conditions. Electronics and software have been through years of field testing. Add to that the careful assembly and quality control in our state-of-the-art facility, and you get a top-of-the-line motion control head.
Call, email or visit one of our demo / rental showrooms in Southern California, Austin or New York.
standard features
Zoom and focus control integrated in the head
Console joystick control for pan, tilt and zoom; Button control for focus
Switch between precise markings with variable speed / movement curves
Recording and playback of a movement up to 1 hour
Independently programmable maximum speed for Pan & Tilt
Independently programmable smoothing for Pan & Tilt
Precise, resettable zero point for motion referencing
Up to 2500 feet between controller and head
User-defined soft limits for the pan and tilt area of ??the movement
Serial and analog lens control from Fujinon, Canon and Preston
Dynamic zoom compensation for particularly quiet shots with telephoto shots
Extremely rigid construction with 100 mm or Mitchell bracket
Pan-base slip ring for continuous 360 ° movement
Closed drive
on request
VariZoom VZCINEMAPRO-JR-K4 Remote Head with Deluxe Jocstick
The CinemaPro Jr. K4 incl.
• Controller: Jibstick Pro w/ Pan/Tilt/Zoom/Focus
• For cameras up to 35 lbs.
• Controller to control Zoom and Focus - one Hand unit included
CinemaPro Jr Remote Head w/ Deluxe Pro Joystick Controller
With our ergonomic Jibstick Pro controller, the Cinema Pro JR-K4 offers high-performance pan/tilt/zoom/focus in an incredibly user-friendly package. With all the speed and stability of the advanced motion control kits, but no menus or complex settings, and far fewer buttons and options, the Cinema Pro JR-K4 goes to work with minimal training and setup. At only 13 pounds, the CP Jr is ideal for cranes and portable remote applications, and its superior programming capability and rock-solid electromechanical performance make it a perfect upgrade for the low-tech heads found on most jib systems. The enclosed, slip-ring based drivetrain provides no-maintenance, reliable performance in nearly any environment. The K4 control offers a professional long-throw joystick mounted in a palmrest housing, on-the-fly custom motion limits, integral lens control via plug-in pistol-grip zoom/focus remote, speed & smoothing control, motor disable, pan/tilt/zoom/focus direction switches, & USB interface for advanced setup and firmware updates. This kit includes CP Jr head, Jibstick Pro, plug-in zoom/focus control, 50' control cable, AC adapter, 30' XLR power extension, waterproof hard carrying case.
Features
-Professional Long-Throw Joystick for Pan & Tilt
-Included plug-in hand control for zoom & focus
-Independent speed control for pan & tilt
-Smoothing control for pan & tilt
-Set independent motion limits for pan and tilt to limit rotation, preset location marks, or lock position
-Motor disable switch
-Motor direction switch for pan/tilt/zoom/focus
-USB interface for firmware updates and PC-compatible GUI control panel
-GUI control panel allows setup of lens parameters, joystick deadband, and other advanced features
-2500' max std extension, longer w/ fiber optic option
-Wireless Option available
-Built-In Lens control for Fuji/Canon/Preston
-Extremely rigid for smooth motion @ telephoto
-Also compatible with TOC lens control systems
-Extremely Rigid Build w/ 100mm or Mitchell Mount
-Pan-base slip-ring for continuous 360° motion
-High-power Enclosed Drivetrain Allows Dynamic Moves
-System can be upgraded with Advanced Console for additional features
This high performance Pro Jibstick control kit offers the simplicity and intuitive design favored by operators, but now adds many of the features from our more advanced control systems. The controller features on-the-fly custom soft limit setting to restrict the range of pan/tilt motion - a very useful feature for preventing lens collisions, to limit the field of view, lock position, or set specific location marks. Integral lens control via plug-in pistol-grip remote allows 2-hand pan/tilt and zoom/focus operation. The Pro Jibstick also has smoothing, speed control, motor disable, direction controls for pan/tilt/zoom/focus, and a USB interface for advanced setup options.
The Cinema Pro Jr borrows heavily from the acclaimed Cinema Pro master motion control system, and although it's scaled down about 35% in most respects, the CP Jr's baseline performance is remarkably close to that of its big brother. At only 13 pounds, the Cinema Pro Jr is ideal for jib and crane applications, and its superior programming capability and rock-solid electromechanical performance make it a perfect upgrade for the low-tech heads found on most jib systems. The CP Jr sets up quickly with no twisting wires or tedious balancing process, and it's capable of extremely precise, repeatable movements at any speed. The CP Jr also performs extremely well as a high speed fixed-mount head or a mobile remote head for small to mid-scale productions.
The deluxe manual Jibstick Kit is a streamlined, user-friendly system that has all of the electromechanical performance of the other kits, but without full motion control capability. This Jibstick control has a professional long-throw joystick mounted in an ergonomic grip base and all controls and settings are within reach of your fingertips. The Jibstick system includes a zoom/focus controller, but it also integrates seamlessly with our TOC lens controls systems. The Jibstick works beautifully where intuitive manual control is needed, and it can be upgraded later with an advanced console and pan bars or hand wheels. The new Jibstick allows you to set independent motion limits for pan and tilt, lock off pan and/or tilt, switch motor power off, reverse direction on pan/tilt/zoom/focus independently, adjust speed limits for pan & tilt independently, and adjust smoothing control for softer starts & stops.
Incorporating such high-end features as precision enclosed drivetrain, pan slip ring, and built-in zoom/focus control, the Cinema Pro Jr represents a new standard for lightweight, cost-effective pan & tilt motion control heads. The Cinema Pro Jr is precision-made yet rugged and becoming the logical and affordable choice for a much broader scope of users than any head on the market. Cost effective not only for big budget motion pictures, but for worship facilities, sports, concerts, newsrooms,military,government, and other film, video, and HD applications.
on request
VariZoom VZCINEMAPRO-JR-K5 Remote Head with Jibstick
Controller: Jibstick Jr w/ Pan/Tilt
For cameras up to 35 lbs.
Cinema Pro Jr Remote Head w/ Jibstick Jr
Open the door to big productions with VariZoom's new affordable CPJ-K5. The high production values offered by our advanced motion control heads are now within reach of independent shooters and production companies at all levels. With this kit, VariZoom / mocoDyne offers an entry-level price point for videographers to get a sophisticated and powerful motion control system that can be easily upgraded as you make more money with your productions. The CPJ-K5 includes the CinemaPro Jr head and Jibstick Jr control unit using electromechanical design from multi-Academy Award winning engineers. With this system, you are getting the same high-performance exoskeletal motion control head that comes with the more expensive kits, but the Jibstick Jr is a streamlined manual controller that allows precise, tunable pan and tilt motions. No other system in this price range offers the robust, feature-packed, precision-made, and frame-accurate capable design of the Cinema Pro Jr. For the price of another system with lesser capability and virtually no upgrade path, you can have a starter kit for a motion-picture quality system. System Includes: CinemaPro remote head, Jibstick Jr. controller, 50' control cable, 30' XLR power extension, power supply, case.
This high performance compact Jibstick Jr control kit offers the simplicity and intuitive video game-type thumb control favored by many modern operators. It is a more streamlined version of the Jibstick Pro - there is no built-in lens control, no motion limits for pan/tilt, no motor disable, and no camera record start/stop. The Jibstick Jr has all of the electromechanical performance of the other kits, but without full motion control capability. The Jibstick Jr uses a precision thumb control joystick on a compact handgrip control box. All controls and settings are within reach of your fingertips. The new Jibstick Jr allows you to reverse direction on pan & tilt independently, adjust speed limits for pan & tilt independently, adjust joystick deadband, and set smoothing control for softer starts & stops.
With independent speed and direction controls for pan & tilt, smoothing/ramping control, and adjustable deadband for our precision thumb joystick, you'll have exceptionally smooth and dynamic remote pan & tilt control up to 2500'. The addition of the optional advanced console enables full motion control capability, as well as the ability to control the head using cine-style hand wheels or broadcast-style pan bars. These upgraded systems offer full pan/tilt/zoom/focus/iris control within the following modes: motion-linked intervalometer for time-lapse and stop motion, record and playback of 1 hour and 2000 takes, frame-accurate repeat pass, up to 2000 position marks, the ability to import and export all motion control data, and much more.
on request
VariZoom VZCINEMAPRO VZCP-C09 Zoom Focus Cable
Connects CinemaPro head to camera lens control. Available for Canon or Fujinon digital or analog lenses. Can control any feature that is available from the lens.
Price maybe different - depends on lens !
on request
VariZoom VZCINEMAPRO VZCP-T40 Zoom and Focus Option
Zoom/Focus controller attaches to tripod handles.
on request
VariZoom VZCINEMAPRO VZTOC-COMC cable
Very high-quality connection cable for connecting the VZTOC control to the VariZoom advanced console.
on request
VariZoom CINEMAPRO Micro Remote Head Kit VZCPM-K3
The newest addition to the CinemaPro family, the CP Micro comes in at roughly half the size & weight of the JR and one-third the original CP. Despite its small form factor, the CP Micro is a real powerhouse, utilizing a high-efficiency, low-mass, enclosed drivetrain that will literally make heads spin. Capable of moving at an imperceptible creep up to 180 degrees in just over a second, the CP Micro is also a true motion control head with frame-accurate capability and full compatibility with our existing and future line of control modules, including wheels, pan bars, jibstick, and advanced consoles (single and multi-head).
In production now - available July 2016!
Using the same control system as our acclaimed CP and CP JR heads, the CP Micro offers the same frame-accurate, fully enclosed drivetrain, high-performance design at a much more affordable price and in a much smaller and lighter package. Ideal for Canon C100 & C300, Sony FS5, DSLRs, and any other compact cameras under 12lbs, the CP Micro sacrifices nothing in quality but is tailored to meet the needs of shooters who need a smaller and lighter package for use with their compact cameras.
Works with all of the CP controls, including pan bars, hand wheels, advanced console, new River multi-head 28-axis console, Jibstick Pro, and Jibstick JR.
Built upon a legacy of exceptional quality at rational prices, the CP Micro will be perfect for any jib, remote pan/tilt, or multi-camera studio control system.
The delivery of this product without remote control - possibly interesting for owners of Cinema Pro Cinema Junior.
INCLUDING ADVANCED Control
on request
VariZoom CINEMAPRO Micro Remote Head Kit VZCPM-K4
The newest addition to the CinemaPro family, the CP Micro comes in at roughly half the size & weight of the JR and one-third the original CP. Despite its small form factor, the CP Micro is a real powerhouse, utilizing a high-efficiency, low-mass, enclosed drivetrain that will literally make heads spin. Capable of moving at an imperceptible creep up to 180 degrees in just over a second, the CP Micro is also a true motion control head with frame-accurate capability and full compatibility with our existing and future line of control modules, including wheels, pan bars, jibstick, and advanced consoles (single and multi-head).
In production now - available July 2016!
Using the same control system as our acclaimed CP and CP JR heads, the CP Micro offers the same frame-accurate, fully enclosed drivetrain, high-performance design at a much more affordable price and in a much smaller and lighter package. Ideal for Canon C100 & C300, Sony FS5, DSLRs, and any other compact cameras under 12lbs, the CP Micro sacrifices nothing in quality but is tailored to meet the needs of shooters who need a smaller and lighter package for use with their compact cameras.
Works with all of the CP controls, including pan bars, hand wheels, advanced console, new River multi-head 28-axis console, Jibstick Pro, and Jibstick JR.
Built upon a legacy of exceptional quality at rational prices, the CP Micro will be perfect for any jib, remote pan/tilt, or multi-camera studio control system.
The delivery of this product without remote control - possibly interesting for owners of Cinema Pro Cinema Junior.
INCLUDING JIBSTICK PRO Control
on request
VariZoom CINEMAPRO Micro Remote Head Kit VZCPM-K5
The newest addition to the CinemaPro family, the CP Micro comes in at roughly half the size & weight of the JR and one-third the original CP. Despite its small form factor, the CP Micro is a real powerhouse, utilizing a high-efficiency, low-mass, enclosed drivetrain that will literally make heads spin. Capable of moving at an imperceptible creep up to 180 degrees in just over a second, the CP Micro is also a true motion control head with frame-accurate capability and full compatibility with our existing and future line of control modules, including wheels, pan bars, jibstick, and advanced consoles (single and multi-head).
In production now - available July 2016!
Using the same control system as our acclaimed CP and CP JR heads, the CP Micro offers the same frame-accurate, fully enclosed drivetrain, high-performance design at a much more affordable price and in a much smaller and lighter package. Ideal for Canon C100 & C300, Sony FS5, DSLRs, and any other compact cameras under 12lbs, the CP Micro sacrifices nothing in quality but is tailored to meet the needs of shooters who need a smaller and lighter package for use with their compact cameras.
Works with all of the CP controls, including pan bars, hand wheels, advanced console, new River multi-head 28-axis console, Jibstick Pro, and Jibstick JR.
Built upon a legacy of exceptional quality at rational prices, the CP Micro will be perfect for any jib, remote pan/tilt, or multi-camera studio control system.
The delivery of this product without remote control - possibly interesting for owners of Cinema Pro Cinema Junior.
INCLUDING JIBSTICK Jr. Control
on request
VariZoom CINEMAPRO Micro Remote Head only VZCPM
The newest addition to the CinemaPro family, the CP Micro comes in at roughly half the size & weight of the JR and one-third the original CP. Despite its small form factor, the CP Micro is a real powerhouse, utilizing a high-efficiency, low-mass, enclosed drivetrain that will literally make heads spin. Capable of moving at an imperceptible creep up to 180 degrees in just over a second, the CP Micro is also a true motion control head with frame-accurate capability and full compatibility with our existing and future line of control modules, including wheels, pan bars, jibstick, and advanced consoles (single and multi-head).
In production now - available July 2016!
Using the same control system as our acclaimed CP and CP JR heads, the CP Micro offers the same frame-accurate, fully enclosed drivetrain, high-performance design at a much more affordable price and in a much smaller and lighter package. Ideal for Canon C100 & C300, Sony FS5, DSLRs, and any other compact cameras under 12lbs, the CP Micro sacrifices nothing in quality but is tailored to meet the needs of shooters who need a smaller and lighter package for use with their compact cameras.
Works with all of the CP controls, including pan bars, hand wheels, advanced console, new River multi-head 28-axis console, Jibstick Pro, and Jibstick JR.
Built upon a legacy of exceptional quality at rational prices, the CP Micro will be perfect for any jib, remote pan/tilt, or multi-camera studio control system.
The delivery of this product without remote control - possibly interesting for owners of Cinema Pro Cinema Junior.
on request
VariZoom WIRELESS MODULES FOR CINEMAPRO and JR
Allows for wireless operation between CinemaPro Head and Full function remote for up to 1 Mile line of sight. Includes Power Supply and cables.
Allows for wireless operation between CinemaPro Head and Full
function remote for up to 1 Mile line of sight. Includes Power Supply
and cables.
€ 7134.05 incl. VAT
must be ordered - not in stock
VariZoom VZCINEMAPRO-K1 with Handwheels
CP Head w/ Advanced Console & Hand Wheels Incl, 50' Control Cable, 30' Pwr Cable, Pwr Supply & Case
€ 35694.05 incl. VAT
must be ordered - not in stock
VariZoom VZCINEMAPRO-K3 Remote Head Kit
VariZoom CinemaPro K3 Set
CP Head w/ Advanced Console Includes 50' Control Cable, 30' Power Cable, Pwr Supply & Case
€ 29744.05 incl. VAT
must be ordered - not in stock
VariZoom VZCINEMAPRO-K2 Remote Head w/ PanBar
Now available - Stabilization / Backpan upgrade.Designed and built by Academy Award winning motion picture engineers, the Cinema Pro has been chosen by DPs and producers around the world for its smoothness, stability, and versatile feature set. In production for many years now, the Cinema Pro is extremely reliable, easy to set up and operate, and capable of imperceptibly slow or lightning fast moves with no sacrifice in stability. With an impressive set of standard features and a proud pedigree, it outperforms the competition at a fraction of the price and works with a huge range of film and video cameras.
The Cinema Pro-K2 pan bars kit is popular with broadcast operators, sports cameramen, and videographers. The pan bars are great for tracking shots and easier to learn than the hand wheels, so those relatively new to motion control often gravitate toward the pan bars option. The pan bars offer scalable speed so the head's range of motion can be customized relative to the motion of the pan bars. The zoom & focus hand controls on the pan bars enable seamless single-operator remote camera control. The pan bars are slaved to the advanced console, which features a superb 3-axis joystick with customizable response for pan/tilt/zoom, oversize control knobs for focus and menu adjustment, backlit keypad, and a whole host of parametric menu settings and interface options. The system is compatible with virtual set software, motion data import/export, and is capable of controlling servo lenses directly or can be integrated seamlessly with our TOC external lens drive motor system.
The Cinema Pro is used on a regular basis by crane & jib operators, visual effects studios, sports & racing productions, and feature film crews worldwide. Available with a wide array of options for camera control, mounting hardware, and even wireless up to 1 mile, the Cinema Pro is the ultimate in affordable true motion control heads, with superb mechanical stability and frame-accurate, recordable 5-channel control for absolutely precise repeatable motion control sequences. If you have any questions, please email or call us, or you can visit one of our demo/rental outlets for a hands-on experience.
Features
-Joystick control for Pan/Tilt/Zoom, separate Knob for Focus
-Record and move to up to 2000 marked positions
-Record and playback 1 hour and up to 2000 takes
-Share recorded data w/ laptop: upload/download
-Programmable max. speeds for individual motors
-Programmable smoothing controls for each motor
-Precise homing control via pushbutton commands
-2500' max std extension, longer w/ fiber optic option
-Wireless Option available
-Programmable motion limits for both pan & tilt
-Servo tuning available at Full Function Remote
-Fuji/Canon/Preston serial & analog lens control
-Zoom Compensation for smooth moves at telephoto
-Camera sync. feature for frame-accurate shots
-Advanced Intervalometer provides 3 modes for stretching moves in time
-Extremely rigid for smooth motion @ telephoto
-Full slip rings for continuous 360 degree motion
-Now Available: Optional HD Video slip rings for pan and tilt.
The Advanced Controller, aka 'Full Function Remote,' is the brains of the system that contains all the parametric motion control and recording capabilities, as well as an LCD readout, connector panel, pan/tilt joystick, and zoom/focus controls. The Advanced Controller can be used stand-alone for desktop/tripod operations or paired with optional Control Input Units.
The Optional Pan-bars and Hand-wheels Control Input Units must be used in conjunction with the Advanced Controller.
Demo & Rental Showrooms
VariZoom HQ - Austin TX (512) 219-7722
CVC - Freisen, Germany - 00496855 996046
Cinema Pro Kits
VZCinemaPro-K2
This kit includes:
The Cinema Pro Remote Head
The Pan-bars Unit w/ zoom/reset & focus hand controls, Advanced Control Console
Power Supply w/ 30' XLR Extension Cable
50' Communication Cable
Hard Travel Case
*Reset control allows you to reposition the pan bars without moving the head*
€ 41644.05 incl. VAT
must be ordered - not in stock
VariZoom VZCINEMAPRO-K5 Remote Head
VZCINEMAPRO-K5
CP Head w/ Jibstick Jr Controller Includes 50' Control Cable, 30' Pwr Cbl, Pwr Supply & Case
€ 24984.05 incl. VAT
must be ordered - not in stock
VariZoom VZCINEMAPRO-K4 Remote Head Kit
Perfect for basic high performance manual pan/tilt control, the Cinema Pro-K4 has all the speed and stability of the other kits without the advanced parametric setup or repeatability. Utilizing powerful but quiet drivetrains and full slip rings, the Cinema Pro head is capable of tracking the most delicate to the most intense actions with equal grace. The Jibstick controller does not allow any repeatable moves or motion control setup. The only controls offered through the jibstick are proportional pan & tilt w/ speed & smoothing control, as well as limited zoom and focus control functionality.
• Includes jibstick pro controller
• Includes 50' control cable
• Includes 30' power cable
• Includes Power supply
• Includes case
€ 26174.05 incl. VAT
must be ordered - not in stock
VariZoom VZDVRODS 15mm RodSystem
The DV Rods system boasts an impressive range of adjustment that will accommodate most cameras, and the X-Y rods-adjustment plates are even reversible to allow greater upward adjustment. When paired with VariZoom new quick release mechanism, the possibilities are extended even further. The DV Rods system has additional threaded holes to enable attachment of aft-mount rods that will allow even more accessories to be mounted behind the camera, helping to counterbalance the fore-mounted accessories while keeping the overall configuration center of gravity low.
Designed to work with the VZ-FCU and EFCU focus control systems for the Sony PWM-EX1 and EX3, the DV Rods system not only provides a mount for the focus bracket, it will allow users to add a mattebox or any other accessory that can be mounted to standard 15mm rods (19mm-15mm step-down adapter rings available for separate purchase). The DV Rods system was designed with functionality in mind, with a broad, flat mounting surface and low profile to prevent top-heaviness that can lead to awkward tilting or wobbly shots. Highly Recommended Accessory for use with EX1/EX3 - VZQRP quick release plate. The VZQRP allows great flexibility in mounting the camera, adjusting and dismounting it.
€ 212.37 incl. VAT
in stock
VariZoom VZ-ZGRIG DSLR - the best DSLR Shoulder Support
Based on the ZG Rig for HD video cameras, the ZG Rig DSLR is specially tailored to DSLR-for-video applications. It offers an impressive range of adjustments to fit just about any body type or shooting preference. Configurable to right or left shoulder mounts, high or low angles, and near or far mounting positions, the ZG Rig DSLR will accommodate a huge range of needs. The system comes with an extra-long accessory mount for flashes, monitors, lights, mics, etc
on request
VariZoom VZR1001 Riglit Support - 15mm Rod Spring-Support
Waist Support System with Belt, Dual Stage Spring Pod and Adjustable Swivel Clamp for 15mm Rods.
on request
VariZoom VZQRP Quick release Plate for photo and video
Quick release plate with 1/4 inch and 3/8 inch threaded screws with folding handle!
Also a fixing screw for attachment to the tripod is included!
Compatible with Manfrotto 357 plate and head adapter
Camera installation possible without tools!
Our universal camera quick-release plate assembly works with any camera and attaches to any tripod, camera support, or stabilizer, enabling quick switching between support devices.
€ 59.44 incl. VAT
in stock
VariZoom VZLSP shoulder support excellent
Pro Shoulder Brace with Ab Support for HD & DSLR Cameras
Designed and crafted to exacting standards, the LSP is the benchmark for all rigid camera supports. Extremely lightweight (about 2lbs), highly adjustable and rock-solid, it eliminates the fatigue and discomfort of handheld shooting with its ergonomic structure and abdominal support. The LSP carries the weight of the camera for you and makes all-day shooting a breeze.
The VZ-LSP is an incredible product that you will take pride in owning and utilizing. Assembled with over 20 individual precision-machined parts, the VZ-LSP is truly a work of art that is appreciated by professionals all over the world. Unlike many of the similar products on the market, the LSP has a genuinely refined ergonomic design based on many years of field service and customer feedback. Shoot fatigue free all day with camcorders up to 8 pounds. The VZ-LSP provides for ten adjustable fittings for an endless variety of body types. The VZ-LSP is tough, lightweight and made to last a lifetime. Add a VariZoom controller and you have a powerful acquisition tool. Guaranteed best or your money back!
Shoulder and abdomen support carry the weight of the camera, eliminated stress and fatigue
Adjustments include: angle of shoulder pad, position of camcorder platform, angle of handle, length and angle of abdomen support, and angle of abdomen pad - fits nearly any height or girth
Lightweight, compact folding design for great portability
Handle is compatible with all VariZoom controllers. VZ-PG-L w/ deluxe clamp allows for direct replacement of handle w/ PG-L controller
€ 355.81 incl. VAT
in stock
VariZoom VZSTINGRAY - shoulder support for DSLR
Ultimate Modular Support w/ Shoulder Brace, Shock Mount, 2 Handles, 15mm Rods, Pivot Brace/Grip, QR
€ 935.88 incl. VAT
must be ordered - not in stock
VariZoom VZCINERIG Shoulder support modular System
The CineRig provides great stability and freedom of movement, allowing shooters to concentrate on maintaining focus and framing for truly cinematic footage. Easily converts down into a CineGrip dual freehand stabilizing rig for more dynamic improvised shots, a lightweight StingShot brace, or many other configurations with the addition of other Riglits.
The CineRig is the most stable shoulder mount available for DSLRs and compact HD cameras due to its dual counterbalanced shoulder mount design. The superior coupling effect of the rig to your shoulder region allows you to concentrate entirely on framing and focusing without any of the ill-effects normally associated with directly handling the lens of a small camera during video footage.
The CineRig can also be upgraded with other Riglits to provide a fully supported rig using our suspension pod and belt system, or it can be broken down into simpler configurations such as the CineGrip or StingShot. With the purchase of additional rods and a camera plate, the CineRig can even be split into two separate systems!
Versatility is the hallmark of the StingRay and Cine series supports. You can buy one of our bundled systems or purchase components individually and create your own rig. The counterbalance system of our shoulder mounts is so flexible that you can remove the weights or add heavier ones to fit your needs at minimal cost - it is compatible with standard 1 center barbell weights available at any fitness store.
€ 890.11 incl. VAT
must be ordered - not in stock
VariZoom VZDVTRAVELER shoulder support up to 3.2 Kg
The DV Traveler is our most compact, lightweight, and affordable shock absorbing support for HD and DSLR cameras. The shoulder mount extends and rotates to fit any physique and the handles rotate for the perfect grip. The suspension pod and belt combo supports the weight of the camera while absorbing shock and motion. The DV Traveler breaks down small enough to fit in a backpack and it's so light you'll barely know it's there. Also included is a camera quick-release plate compatible with many other VariZoom products and a pivoting accessory mount for lights, mics, XLR adapters, etc. The DV Traveler's machined aluminum construction, stainless fasteners, reinforced padding, and 2-year warranty make it a reliable investment as a production tool.
Combining the best in versatility, comfort and compact design, the DV Traveler goes anywhere you go.
VariZoom's DV Traveler compact shock absorbing support is the solution for lightweight professional camera support. The telescoping, padded shoulder arch can extend and rotate to the perfect position for any operator. This unit folds flat and the shoulder arch can be removed with no tools for storage or travel. Also included is our rotating accessory mount for lights, monitors, mics, etc..
The unit is machined to the highest standards for rock solid, shock-absorbing support and durability. Angled rotating handgrips provide comfortable hand positioning and allow plenty of room for mounting a lens control.
The suspension pod supports the camera weight while providing shock absorption. The suspension pod is constructed from 2 adjustable spring loaded telescopic sections designed to negate camera shakes and bounces. The camera platform can be adjusted side-to-side and front-to-back for optimal viewfinder placement.
The suspension pod allows smooth control over the height of your shot while supporting the camera's weight for effortless shooting. Easily shoot at chest level, eye level, or even shoot over a crowd of people with no strain by simply raising your camera and locking the suspension pod at maximum height. With its numerous adjustments, the DV Traveler will allow anyone to get consistent, fatigue-free shots.
Telescoping horizontal bar allowing for perfect adjustment for eyepiece and or flip out monitor
Padded shoulder arch
Quick release camera mount
Rotating accessory mount for lights, monitors, microphones and more
Cushioned shoulder pad
2 year warranty
on request
VariZoom Stealthy-MP MonoPod for Stealthy stabilizer
Extended monopod for Stealthy which extends over 6'.
€ 20.18 incl. VAT
must be ordered - not in stock
VariZoom Low Mode Kit for Stabilizer VZFCS-LM
Low Mode attachment for VZ-GT Serie stabilizers
€ 208.95 incl. VAT
only 2 stock
VariZoom VZFPMINI camera stabilzer for DSLR compact size
The VZ-FP-MINI is a smaller version of the patented FlowPod series. The key differences are a much lighter body designed to accommodate todays smaller point & shoot cameras as well as small compact DSLR's such as the Canon T1, T2 and similar size cameras that weight 1.6lbs or less. While the original FlowPod has a monopod that extends all the way to the floor, the FP-Mini accomplishes this by allowing you to rest the monopod in the included camera support belt providing you with more mobility. The FP-Mini will also work some of todays most popular smart phones*. * with adapter sold separately.
€ 418.94 incl. VAT
in stock
VariZoom VZFP - FlowPod - multi functional SteadySystem
Flowpod - Stabilizing System w/ Monopod for Cameras 1-9 lbs.
The FlowPod and Handheld HD Cameras - The FlowPod is perfectly suited for compact, handheld HD cameras like the Sony EX-1, Sony NX5U, Canon XF300, Panasonic HPX-250, Panasonic AC160, or any other HD video camera up to 9 lbs. It will allow you to get continuous on-the-go stabilized footage with the unique ability to stop and operate in monopod mode for stationary shots, as well as the added bonus of low angle shots (with optional low-mode kit).
The FlowPod and DSLRs - The FlowPod also works very well with DSLR Cameras like the Canon 5D Mark II, Canon 7D, and Canon Rebel T2i.
The monopod mode offers a significant advantage over competing products because it adds functionality missing from other handheld stabilizers. Having the monopod available allows you to stop and rest while getting a rock-solid stationary shot - all without having to remove your camera to switch to another support device. Many stabilizers never get used due to their limited functionality and time-consuming setup caused by having to switch from stabilizer to other supports and back again. With the FlowPod, setup is a breeze and you won't even need to switch to another support to get the shots you want.
With the FlowPod's built-in patented monopod system, the operator can quickly collapse the monopod and return to stabilizer mode in seconds without having to re-balance. Switching back to monopod mode is just as quick - just lock the handle and extend the monopod. The rapid mode changes of the FlowPod make it great field tool and a true bargain in the high-priced world of stabilizers.
We've had comments from current FlowPod owners expressing regret that they threw away money on less versatile stabilizers before getting the FlowPod. There's simply nothing else on the market like the FlowPod.
Only the FlowPod allows Low-Mode shots from a handheld stabilizer, and with our patented system, you can adjust the camera to any desired height off the ground or even below foot level along overhanging edges.
The unique balancing plate system is a simple but valuable tool included with every FlowPod that saves a lot of time by allowing you to quickly and accurately balance your camera in one attempt.
A superbly versatile stabilizer for HD and DSLR cameras, the FlowPod can be used as a fluid handheld stabilizer, rock-solid monopod, or gliding low-mode tool. The FlowPod is used and recommended by filmmakers, cameramen, and wedding/event videographers worldwide.
Our proprietary handle & gimbal design can either be unlocked as a fluid gimbal for floating stabilizer shots or locked inline for stationary monopod shots. The slim design and narrow base allow the shooter to hold the FlowPod close to the body, relieving stress and enabling tight maneuvers in the most varied circumstances.
The optional Low Flow kit allows gliding low perspective shots and makes the FlowPod a 3-in-1 tool.
NEW Professional Quick Release Slide Plate and keyed lateral adjustment for greatly improved X-Y adjustment (horizontal balancing)
Quick Release Plate is compatible with a wide range of VariZoom products (DV MediaRig, DV Traveler, TK65 tripod, QRP) for quick interchange with other supports
NEW Locking handle w/ tough, no-slip grip allows fluid turns, pans, and tilts in stabilizer mode or rock solid stationary shots in monopod mode
NEW taller standard monopod (62 vs old 54), also available as upgrade option for older units
Optional low mode kit for stabilized low-angle shots also allows for attachment of TFT monitor for easier viewing
Clean and accurate counterbalance system utilizes sliding ring weights for vertical balance adjustment
Precision balance system: X-Y camera plate provides fore/aft adjustment for horizontal balance and sliding counterweights allow for exact vertical balance adjustment
Balancing plate (included) functions as a docking stand while balancing the FlowPod or resting it when not in use
Upgradable with either DV Sportster or Navigator arm/vest systems (see 'Related Products')
VZ-FP1 weight kit required for use with cameras over 5 lbs
€ 211.36 incl. VAT
must be ordered - not in stock
VariZoom VZFPC - FlowPod stabilizer with bag
The FlowPod Kit FPC with Bag for Handheld HD Cameras - The FlowPod is perfectly suited for compact, handheld HD cameras like the Sony EX-1, Sony NX5U, Canon XF300, Panasonic HPX-250, Panasonic AC160, or any other HD video camera up to 9 lbs. It will allow you to get continuous on-the-go stabilized footage with the unique ability to stop and operate in monopod mode for stationary shots, as well as the added bonus of low angle shots (with optional low-mode kit).
The FlowPod and DSLRs - The FlowPod also works very well with DSLR Cameras like the Canon 5D Mark II, Canon 7D, and Canon Rebel T2i.
The monopod mode offers a significant advantage over competing products because it adds functionality missing from other handheld stabilizers. Having the monopod available allows you to stop and rest while getting a rock-solid stationary shot - all without having to remove your camera to switch to another support device. Many stabilizers never get used due to their limited functionality and time-consuming setup caused by having to switch from stabilizer to other supports and back again. With the FlowPod, setup is a breeze and you won't even need to switch to another support to get the shots you want.
With the FlowPod's built-in patented monopod system, the operator can quickly collapse the monopod and return to stabilizer mode in seconds without having to re-balance. Switching back to monopod mode is just as quick - just lock the handle and extend the monopod. The rapid mode changes of the FlowPod make it great field tool and a true bargain in the high-priced world of stabilizers.
We've had comments from current FlowPod owners expressing regret that they threw away money on less versatile stabilizers before getting the FlowPod. There's simply nothing else on the market like the FlowPod.
Only the FlowPod allows Low-Mode shots from a handheld stabilizer, and with our patented system, you can adjust the camera to any desired height off the ground or even below foot level along overhanging edges.
The unique balancing plate system is a simple but valuable tool included with every FlowPod that saves a lot of time by allowing you to quickly and accurately balance your camera in one attempt.
A superbly versatile stabilizer for HD and DSLR cameras, the FlowPod can be used as a fluid handheld stabilizer, rock-solid monopod, or gliding low-mode tool. The FlowPod is used and recommended by filmmakers, cameramen, and wedding/event videographers worldwide.
Our proprietary handle & gimbal design can either be unlocked as a fluid gimbal for floating stabilizer shots or locked inline for stationary monopod shots. The slim design and narrow base allow the shooter to hold the FlowPod close to the body, relieving stress and enabling tight maneuvers in the most varied circumstances.
The optional Low Flow kit allows gliding low perspective shots and makes the FlowPod a 3-in-1 tool.
NEW Professional Quick Release Slide Plate and keyed lateral adjustment for greatly improved X-Y adjustment (horizontal balancing)
Quick Release Plate is compatible with a wide range of VariZoom products (DV MediaRig, DV Traveler, TK65 tripod, QRP) for quick interchange with other supports
NEW Locking handle w/ tough, no-slip grip allows fluid turns, pans, and tilts in stabilizer mode or rock solid stationary shots in monopod mode
NEW taller standard monopod (62 vs old 54), also available as upgrade option for older units
Optional low mode kit for stabilized low-angle shots also allows for attachment of TFT monitor for easier viewing
Clean and accurate counterbalance system utilizes sliding ring weights for vertical balance adjustment
Precision balance system: X-Y camera plate provides fore/aft adjustment for horizontal balance and sliding counterweights allow for exact vertical balance adjustment
Balancing plate (included) functions as a docking stand while balancing the FlowPod or resting it when not in use
Upgradable with either DV Sportster or Navigator arm/vest systems (see 'Related Products')
VZ-FP1 weight kit required for use with cameras over 5 lbs
€ 243.21 incl. VAT
Available soon - please send request for reservation
VariZoom VZFPK FlowPod with bag and low mode attachment
FlowPod with Carrying Case (FPCASE) and Low-Flow Kit (LF)
The FlowPod is the only handheld stabilizer that offers 3 tools in one: Monopod mode, Stabilizer Mode and Low Mode. Although it s a great handheld stabilizer for those floating, smooth action shots everybody wants, what sets the FlowPod apart from all other handheld stabilizers is value and utility. No other device on the market allows you get so many different shots with one tool - fluid stabilized motion, solid stationary, or low angle - the FlowPod does it all for a reasonable price.
€ 264.45 incl. VAT
Available soon - please send request for reservation
VariZoom VZ-LF ( FlowPod LowMode Kit )
Low-Flow Kit for VZ-FP (Flowpod) - For Low Shots
This lightweight FlowPod accessory kit allows you to mount your camera near ground level for a creative and fluid low-angle perspective. The kit also allows attachment of a monitor at the top of the FlowPod for easier viewing.
Create a whole new perspective with the FlowPod Low-Flow Kit. The compact, lightweight 3-piece kit transforms your FlowPod into a ground-level stabilizer for ultra-fluid low perspective moving shots. A TFT monitor can be attached at the top of the FlowPod while in Low-Flow mode to allow easier viewing of the action. The Low-Flow setup can be extremely useful for sports, nature, narrative or documentary shooting.
€ 96.60 incl. VAT
must be ordered - not in stock
VariZoom VZFPCASE transport bag for VariZoom FlowPod
The FlowPod carry case is custom designed to hold the FlowPod with all accessories. The attached shoulder strap allows for comfortable and convenient transport.
€ 32.88 incl. VAT
must be ordered - not in stock
VariZoom VZFP1 - extra weights for Flowpod
FlowPod Extra weight kit for cameras more heavy than 2.5 Kg
€ 31.81 incl. VAT
in stock
VariZoom FlowPod VZFPSM - Video Steadycam up to 2.5Kg
Master DV Sportster System - FlowPod, Low Flow, Case, DV Sportster, Extra weights.
For years now, users of handheld stabilizers have complained of arm and wrist fatigue when operating their handheld for extended periods of time. The DV Sportster eliminates the stress and lets you concentrate on your shot instead of your discomfort. Whether you have an old or new handheld stabilizer, you can safely buy the DV Sportster knowing it will provide both comfort and improved performance.
Arm - The DV Sportster Arm emerged from years of experience in manufacturing fully-supported professional stabilizers. Because the Sportster doesn't have to carry heavy loads, we're able to not only make it less expensive, but also smaller, lighter, and easier to use. Of course, lower cost doesn't have to mean lower quality, as the same material and design principles of our professional systems are employed in building this perennial bestseller. In fact, the same manufacturing team that produces our $7000 systems makes the DV Sportster, right here in the USA.
Vest - The DV Sportster Vest also owes much of its manufacturing heritage to our high-end line. In fact, the Sportster uses the same breastplate assembly found in our top-of-the-line BlackHawk. However, the lower weight capacity means it can utilize lighter-duty bracing and padding, so as it becomes less costly to build it also grows lighter and more breathable, resulting in a very comfortable and portable vest system that is cool to wear and easy to adjust.
Versatility and Convenience - Compatible with the vast majority of handheld stabilizers on the market, the DV Sportster isn't limited to use with VariZoom products, and if you haven't used your handheld in awhile, you need to try it with the Sportster. Alternatively, if you're just starting out with stabilizers, we have several kits pairing the DV Sportster w/ handhelds for turnkey systems at a fraction of the cost of typical pro systems - and you'll still have the freedom to use the handheld independently - something you can't do with a pro system. Add to all this the fact that the DV Sportster comes with a compact shoulder bag weighing less than 9lbs when packed, and you have the best value on the market.
The DV Sportster is the most versatile, affordable arm/vest stabilizer system on the market. It will support the FlowPod, UltraLite, Glidecam, and Merlin handheld stabilizers.
€ 1335.79 incl. VAT
Available soon - please send request for reservation
VariZoom Stealthy - camera stabilizer multi function tool
More than just a Camera Stabilizer
Stealthy camera supports. (TM) The world's most versatile camera supports and stabilizers.
The Stealthy(TM) is a unique, high quality stabilizer for video cameras. Its patented engineering allows an operator to switch back and forth from a tabletop tripod, 3-point shooter, camera stabilizer, short monopod stabilizer, or long monopod (sold separately) quickly and easily. Stealthy(TM) is specifically designed to hang from your belt clip when not in use and can be quickly drawn up for capturing shots at a moment s notice. This ground breaking handheld camera stabilizer is offered at a price that is affordable for both amateurs and experienced film makers alike.
Stealthy(TM) is made for handling cameras up to 3 lbs., but we also offer the Stealthy(TM) WT5 for cameras weighing up to 5 lbs. The Stealthy s(TM) ability to quickly convert between multiple support points makes it one of the most popular and versatile film accessories on the market.
€ 211.36 incl. VAT
must be ordered - not in stock
VariZoom Stealthy-WT5 Upgrade Weight Kit for Stealthy
Accessory weight kit for Stealthy to carry cameras 3+ to 5 lbs
€ 26.55 incl. VAT
in stock
VariZoom VZ-NavFPK - Kit FlowPod with Navigator vest
Navigator w/ FPK (FlowPod Kit w/ Case & Low Flow) - up to 8lbs.
€ 2121.12 incl. VAT
Available soon - please send request for reservation
VariZoom VZ-Navigator - universal Vest for stabilzer gimbal
Single Arm and Vest System for FlowPod & other HandHeld Stabilizers-Up to 10 lbs. (w/ GlideCam TM)
The ultimate vest/arm upgrade for FlowPod and Glidecam handheld stabilizers, the Navigator borrows heavily from our the Prolite professional stabilizer system, utilizing many of the same Vest and Arm features from the Prolite. Handheld stabilizers allow shooters to get beautiful, fluid images at a budget price, but they can cause arm and wrist fatigue when used for extended periods of time. The Navigator completely eliminates the stress and lets you concentrate on your shooting instead of your discomfort. One of the best things about the Navigator is that it can be upgraded later with a Prolite sled, transforming it into a bona fide professional stabilizer system.
Heavy-duty single dynamic arm easily handles 10 pound cameras for the GlidecamTM 4000
NEW form-fit, torso gripping vest is lightweight and cool
System is fully equipped to work with either FlowPod or Glidecam units
Setup and operation are simple
Can be used with Prolite sled for later upgrade to full professional system
Optional Package - NavFPK - Navigator Kit includes vest, arm, and FlowPod Kit (FP w/ case and low-mode)
€ 1696.63 incl. VAT
must be ordered - not in stock
VariZoom Smart Kit StealthyGo mount remote Android Iphone
Add this kit to your StealthyGo so you can mount and control your Android or iPhone. Phone holder works with most smart phones and the bluetooth remote allows you to take pictures without having your hands on the camera.
StealthySmart Smart phone holder and our Bluetooth remote shutter for triggering iPhone and Android cameras remotely. Pause/Record for video and Shutter trigger for picture taking. Get better selfies with hands off the camera or even take a group photo 20-30 feet away. Ideal accessory for Stealthy, StealthyGo, StealthyPro or any photo device you which to mount your phone/camera.
€ 21.19 incl. VAT
only 2 stock
VariZoom Stealthy Pro camera stabilzer
The Stealthy Pro has all the features of the original Stealthy, but adds a professional 6 bearing gimbal and retractable handle for improved stabilizer operation. The pro gimbal offers improved control and precision design for excellent performance, and the retractable handle allows you to position the handle vertically.
StealthyPro Camera Stabilizer
Stealthy(TM) Video Camera Stabilizers are the Best Handheld Camera Stabilizers
The Stealthy(TM) is a unique, high quality stabilizer for video cameras. Its patented engineering allows an operator to switch back and forth from a tabletop tripod, 3-point shooter, camera stabilizer, short monopod stabilizer, or long monopod (sold separately) quickly and easily. Stealthy(TM) is specifically designed to hang from your belt clip when not in use and can be quickly drawn up for capturing shots at a moment s notice. This ground breaking handheld camera stabilizer is offered at a price that is affordable for both amateurs and experienced film makers alike.
Stealthy(TM) is made for handling cameras up to 3 lbs., but we also offer the Stealthy(TM) WT5 for cameras weighing up to 5 lbs. The Stealthy s(TM) ability to quickly convert between multiple support points makes it one of the most popular and versatile film accessories on the market.
€ 264.45 incl. VAT
must be ordered - not in stock
VariZoom StealthyGo stabilizer for GoPro and mobile phone
StealthyGo - The Ultimate, on-the-go Camera Accessory (Ultra Water-Resistant)
Material Plastic and Aluminum
Max Camera Weight 2 lbs.
Includes Belt clip
Modes Stabilizer through weight and multipoint ( no gimbal ), 3-Point Shooter, Handheld, Tabletop, or Monopod
Waterproof 99% waterproof lightweight composite and aluminum construction
This system has not a stabilzer gimbal ... it used multipoint stabilization from body and area arround only !
€ 58.31 incl. VAT
in stock
VariZoom StealthyGo PLUS stabilizer for Smartphones
StealthyGo Plus with Phone Holder and Bluetooth Remote for iPhone/Android phones
Use with any camera or phone under 2 lbs
The VariZoom StealthyGo(TM) is the third and newest generation of our popular, triple-award winning, patented Stealthy series. The StealthyGo(TM), unlike its all-metal predecessors, is made from strong, lightweight, weatherproof composite. The StealthyGo(TM) is a patented support that, like a transformer, goes from telescoping 'selfie' mode, to monopod mode, tripod mode, 3-point shooter mode, camcorder mode and hip mode, where it hangs from a belt clip for quick access, so you never miss a shot. We feel the StealthyGo is the ultimate GoPro(TM) and small camera support, making the GoPro(TM) even more useful and stable in multiple applications. The StealthyGo(TM) is water-resistant, so you can go freshwater swimming and take it with you - just shake off the excess water when done.
Operation Modes
Stabilizer
In monopod mode, the StealthyGo may be used as a motion stabilizer. By extending or shortening the monopod to make the camera and device center of balance at, or close to, the rubber grip handle allows for the best acquisition in motion. Also with the ultra light composite and compact size users can get into tight areas and sustain longer shots with less stress. ( no fluid gimbal needed and included )
3-Point Shooter
In this mode the monopod stock is oriented vertically, allowing you to press it against your chest for better stability than pure hand-held shooting
Hand-Held
Fully collapsed, the StealthyGo can be used as a hand-held shooting rig, or just as a handle to carry your camera around when not in use
Tabletop
In 3-point configuration, the StealthyGo will free-stand on a table top or other flat, level surface. You can also use this mode to capture shots from close to the ground
Monopod
Twists grips on the tube assembly loosen, extending the StealthyGo into a monopod for better stability and reduced fatigue when shooting from a fixed position. Alternatively, the camera can be reversed, effectively converting the StealthyGo into a selfie pole
€ 69.03 incl. VAT
in stock
VariZoom VZBELT - padded velcro belt with holster
Belt with holster for Flowpod for use in Overhead Mode
Custom adjustable Belt with Holster. Can be used in conjunction with Flowpod for Overhead mode. Also replacement Belt for StingRay, MediaRig, Traveler, CrossFire & ZGRig.
€ 46.41 incl. VAT
in stock
VariZoom VZ-CROSSFIRE-FP Stabilzer up to 4.5 Kg Camera
Our proprietary handle & gimbal design can either be unlocked as a fluid gimbal for floating stabilizer shots or locked inline for stationary monopod shots. The slim design and narrow base allow the shooter to hold the CrossFire FP close to the body, relieving stress and enabling tight maneuvers in the most varied circumstances.
Hybrid FlowPod Stabilizer/Tripod Combo for Cameras 1-7lbs
€ 415.31 incl. VAT
in stock
VariZoom GT Single-Arm Stabilizer with vest
FULLY SUPPORTED SINGLE-ARM STABILIZER FOR CAMERAS 2-16LBS.
€ 1999.00 incl. VAT
in stock
VariZoom VZAVIATOR MX Stabilizer
Dual Dynamic Arm - The Aviator's newly-developed dual-dynamic arm system is extremely fluid, lightweight, and solid. It can bear cameras 5-15 pounds swiftly and smoothly and offers up to 38 of vertical travel. Twenty-five precision bearings and four custom-manufactured stainless steel springs ensure silent, zero-failure performance.
VariZoom's Aviator Camera Stabilizer No tools required for adjustment - The Aviator sled has been streamlined so that all necessary balance adjustments can be made quickly and easily. The comfortable knurled grip can be twisted to adjust gimbal position and provides precise control over the sled.
Form-Fit Vest - This new improved vest includes a contoured chest pad, torso-gripping 4-point buckle system, and height-adjustable chest plate. The lightweight, cool vest hugs and supports the upper body, making it possible to fly heavy cameras for extended periods.
Precision Gear Drive Stage - Micro-adjustable gear drive stage enables extremely precise tuning of horizontal balance. Quick-release dovetail camera plate allows rapid setup and breakdown in the field.
FlowTech Gimbal - Classic design has been improved with a contoured, ergonomically-sloped extension grip for improved handling and the ability to add a zoom control. Precision 3-axis gimbal delivers consistent fluid motion with six sets of bearings. The lightweight, rugged gimbal ties the system together effortlessly.
Power, Vision, Balance - At the base of the sled, a 7 16:9 NTSC/PAL color monitor serves as a large external viewfinder. A proprietary Li-Ion battery w/ LED capacity indicator is standard (V-lock, AB, NP1 mounts available on request at no extra charge). The monitor and batteries serve as counterweight for vertical balance and their positions can be adjusted for
Custom Rolling Case - A form-cut foam insert protects and secures the system components inside, while the wheeled case with telescoping handle ensures effortless transport. Padded carry pouches hold the toolkit, cables, and monitor.
Training Video - Instructional video available online.
Options - The Aviator comes standard with a sophisticated Li-Ion battery system, but if you prefer to use your own V-lock, Anton Bauer, or NP1 battery, we can substitute the appropriate mount at no extra charge. If you have any other special requests, then give us a call and we'll be glad to discuss your needs. Because these units are hand crafted and assembled, the options are wide open.
€ 4122.10 incl. VAT
in stock
VariZoom VZAUTORIG vehicle car mount kit
The Auto Rig enables cinematic moving-vehicle perspectives from various angles. When not used as vehicle mount, it can also double as a high quality low-level tripod.
The Auto Rig is the most complete and professional vehicle mount kit for DV mini Dv and HD cameras. The Auto Rig enables cinematic moving-vehicle perspectives from various angles. When not used as vehicle mount, it can also double as a high quality low-level tripod. Only VariZoom's unique swivel lock mounting system allows straps to be secured with full and even force, at nearly any angle, without twisting or distressing the straps. High quality case with multiple compartments for easy inventory of components. Custom rubber cups to absorb shock & vibration and protect vehicle surface.
The supplied harness of straps with hooks attach to the edge of a door or hood. The system can be used with most flat base tripod heads (3/8 16 thread) or the included heavy-duty swivel head. The included ajustable swing arm makes low level and other extreme positions and angles possible. The set up is fast and easy and provides a safe, stable and rigid support for your camera. The special anti-skid, rubber suction cup feet protect the car s paint. No tools are needed for setup.
on request
VariZoom VZ-RETRO-TRIPOD
Professional Video Tripod
75mm Bowl
Spiked Feet for Outdoor Use
Rubber Foot Covers for Indoor Use
Hand-crafted, machine made in the USA
€ 476.00 incl. VAT
in stock
VariZoom CHICKENFOOT-HEAD monopod carbon fiber with head
Lightweight carbon fiber 4-stage fluid head monopod with fold-down tripod foot. Extends up to 6.9 feet and includes a fluid pan/tilt head for smooth video. Supports 25lbs; fluid head 10lbs tilting.
This compact and lightweight support offers the portability and quick setup of a conventional monopod with the added stability of a tripod base. The tripod base connects to the monopod section with a ball joint that allows smooth repositioning of the monopod so you can capture any angle needed. Included with this system is a fluid head for smooth panning and tilting. Capable of operating as a tripod/monopod, basic handheld stabilizer, telescoping handheld boom for small cameras, or even a stand for small lights and microphones, the ChickenFoot will quickly find a place in your videography toolkit. The 4-stage carbon fiber design allows the unit to collapse into a very compact form and expand to an extended height of 6.9 feet while retaining excellent rigidity. High quality twist-lock fittings provide easy and secure adjustment for on-the-go shooting. The 'chickenfoot' tripod base folds up for transport and locks down into 3 positions for flexible configuration, and it can even be removed if you wish to use the system as a traditional 'monopod'. The adjustable rubber tripod feet thread out for leveling adjustment, and spiked feet are also included for added stability on different surfaces. The fluid head includes one telescoping handle and a second optional handle can be added. You can even configure the unit as a hi hat tripod by removing the 'chickenfoot' tripod base and attaching the fluid head directly to it. Also includes a soft padded carrying case and removable wrist strap for safe handling.
on request
VariZoom VZT100AM video tripod with mid spreader 100mm half
100mm Aluminum 2-Stage Video Tripod w/ Mid-Spreader (includes Carry Case)
€ 305.54 incl. VAT
must be ordered - not in stock
VariZoom VZSTEALTHPOD - Monopod with quickrelease plate
Telescoping Monopod w/ Quick-release for DSLRs and Small Camcorders
The Varizoom StealthPod is our super sleek pod designed specifically for DSLRs and compact HD camcorders. It is designed to aid in getting that steady shot that everyone wants! The leg can be extended from 23 inches to over 5 1/2 feet quick enough to get that rock solid shot at a moments notice.
Quick release plate for easy camcorder removal
Clamping system locks each telescoping section individually, allowing for full adjustment range of 40 inches
Breaks down to a compact and easily transportable size
€ 61.23 incl. VAT
in stock
VariZoom VZT75A video tripod with mid spreader 75mm
Lightweight, sturdy aluminum plus a handful of useful features make this an excellent choice for any DV or HD shooter.
Folded Height 23
Max./Min. Operating Height 48 / 21
Max. Load Capacity 15 Lbs. - Legs Extended. 25 Lbs. - Legs Collapsed
Unit Weight 6.5 Lbs.
Bowl Size 75mm
Material Aluminum
Warranty 1 years parts/labor
€ 174.87 incl. VAT
in stock
VariZoom VZTK100AM Videostativ 100mm with Fluidkopf
100mm Tripod/Head Combo with VZ-FH100 Head and VZ-T100AM Tripod - Cams up to 15 lbs.
This versatile mid-spreader system pairs our T100AM tripod with the new FH100 fluid head. Perfect for on-the-go shooters, the TK100AM is lightweight, portable, and flexible (2-stage height, adjustable spreader). The system is optimized for cameras up to 15 lbs and includes an all-in-one padded carrying case.
Features:
Legs
-Aluminum Legs
-Lightweight/Compact
-2-stage leg adjustment for compact storage
-Length-adjustable Mid-Spreader for Flexible Location Shooting
-Dual-Purpose Switchable Spike/Rubber Feet for use on any surface3
-Compatible with D50 Dolly System
-Padded Carrying Case
Head
-100mm Fluid Head w/ Indexed Quick Release Plate
-Independent Variable Drag Adjustments for Pan and Tilt
-Progressive Counterbalance Adjustment for Heavier Cameras
-Independent Pan and Tilt Locking Levers
-Backlit Leveling Bubble
-Includes 1 Telescoping Pan Handle (2nd-handle accessory available for separate purchase)
€ 993.35 incl. VAT
Available soon - please send request for reservation
VariZoom VZTKC100C Video tripod with head up to 11Kg cameras
Features:
Legs
-Carbon Fiber Legs
-2-stage leg adjustment for compact storage
-Angle- and length-adjustable spreader for great flexibility
-Claw-spike feet w/ rubber-base foot adapters for smooth surfaces
-Compatible with Cinetrac and D100 dolly systems
-Padded Carrying Case
Head
-100mm Fluid Head w/ Indexed Quick Release Plate
-Independent Variable Drag Adjustments for Pan and Tilt
-Progressive Counterbalance Adjustment for Heavier Cameras
-Independent Pan and Tilt Locking Levers
-Backlit Leveling Bubble
-Includes 1 Telescoping Pan Handle (2nd-handle accessory available for separate purchase)
€ 1868.00 incl. VAT
Available soon - please send request for reservation
VariZoom VZZGFB - zero gravity pan tilt head for tripod
Zero Gravity Tripod Head w/ Flat base
€ 983.31 incl. VAT
in stock
VariZoom VZZG - Pan tilt Head - zero gravity adjustable
Zero Gravity Tripod Head w/ 75mm/100mm multi-mount base
No more camera nose dives or tightening with one hand and tilting with the other. Completely fluid, all you need to do is just point and shoot. You can even do a complete 360 or use underslung on a jib for the worlds best manual pan and tilt.
VZ-ZGQRP - Optional Quick Release Plate for use with the Zero Gravity(TM) tripod head to expedite horizontal balancing and mounting/dismounting of the camera.
Tilts Higher and Lower than any other Professional Tripod Head
2008 Award Winner - Digital Video Black Diamond Award
2008 Award Winner - Vidy Awards
Fits on Tripods with 100mm/75mm Mounting Bowl and Flat-base Mount Tripods (with flat base option)
€ 749.64 incl. VAT
in stock
VariZoom CHICKENHEAD Head for monopod
Fluid head for attaching to Chickenfoot, flat-base tripods, other monopods, jibs, or any flat-base mount w/ 3/8-16 stud. Not compatible with bowl-mount tripods.
This fluid pan tilt head is a perfect upgrade for owners of the Chickenfoot or any flat-base tripod, monopod, slider or other device w/ a flat base and 3/8-16 screw mount. The head features pan & tilt lock and tilt drag adjustment, a leveling bubble, and one telescoping pan handle (plus the ability to add a second optional pan handle). Note: this is not compatible with the VZT75A, VZTK75A or other bowl-mount tripods.
€ 94.52 incl. VAT
must be ordered - not in stock
VariZoom CHICKENLEG-AL aluminium monopod
Heavy-Duty, lightweight aluminum 4-stage monopod extends from 20 to 72 and supports up to 25lbs. You can upgrade to a full 'ChickenFoot-AL' system later by adding a VZCFAL.
The 4-stage aluminum design allows the unit to collapse into a very compact form and expand to an extended height of 6 feet while retaining excellent rigidity. High quality twist-lock fittings provide easy and secure adjustment for on-the-go shooting. The adjustable rubber tripod foot threads out of the base so you can add an optional spiked foot or other accessories w/ 3/8-16 thread.
This compact and lightweight aluminum monopod offers the portability and quick setup of a conventional monopod, but has the ability to attach an optional 'chickenfoot' tripod base (VZCFAL). The optional tripod base is connected to the monopod section with a ball joint that allows smooth repositioning of the monopod so you can capture any angle needed.
You can mount your camera directly to the flat base for lightweight operation or add your own photo or video head for precise pan/tilt control. Add a VZBH760 or VZPH1568 for still photography, or a CHICKENHEAD for fluid pan/tilt on video shooting. Also included with the unit are a soft padded carrying case and removable wrist strap for safe handling.
on request
VariZoom CHICKENFOOT101 monopod carbon fiber with photohead
CHICKENFOOT:
This compact and lightweight support offers the portability and quick setup of a conventional monopod with the added stability of a tripod base. The tripod base is connected to the monopod section with a ball joint that allows smooth repositioning of the monopod so you can capture any angle needed. Capable of operating as a tripod/monopod, basic handheld stabilizer, telescoping handheld boom for small cameras, or even a stand for small lights and microphones, the ChickenFoot will quickly find a place in your videography toolkit.
The 4-stage carbon fiber design allows the unit to collapse into a very compact form and expand to an extended height of 6.6 feet while retaining excellent rigidity. High quality twist-lock fittings provide easy and secure adjustment for on-the-go shooting. The 'chickenfoot' tripod base folds up for transport and locks down into 3 positions for flexible configuration, and it can even be removed if you wish to use the system as a traditional 'monopod'. The adjustable rubber tripod feet thread out for leveling adjustment, and spiked feet are also included for added stability on different surfaces.
You can mount your camera directly to the flat base for lightweight operation or add your own photo or video head for precise pan/tilt control. Also included with the unit are a soft padded carrying case and removable wrist strap for safe handling.
VZPH1568:
This heavy-duty 3-way head for still photography mounts to any tripod or base w/ 3/8-16 stud. A perfect companion for our line of monopods like the ChickenFoot and ChickenLeg, this is a professional grade photography head for cameras up to 15 lbs. The PH1568 has fluid pan/tilt/roll action with a single twist-lock handle for pan/tilt and a second twist-lock handle for roll. The 3-axis design includes a large quick-release plate for a secure camera mount, 3 bubble levels, and handy index marks for all 3 axes.
€ 190.11 incl. VAT
in stock
VariZoom CHICKENFOOT Monopod Carbon Fiber
Lightweight Carbon fiber 4-section monopod with fold-down tripod foot extends from 20 to 78 and supports up to 25lbs.
This compact and lightweight support offers the portability and quick setup of a conventional monopod with the added stability of a tripod base. The tripod base is connected to the monopod section with a ball joint that allows smooth repositioning of the monopod so you can capture any angle needed. Capable of operating as a tripod/monopod, basic handheld stabilizer, telescoping handheld boom for small cameras, or even a stand for small lights and microphones, the ChickenFoot will quickly find a place in your videography toolkit. The 4-section carbon fiber design allows the unit to collapse into a very compact form and expand to an extended height of 6.5 feet while retaining excellent rigidity. High quality twist-lock fittings provide easy and secure adjustment for on-the-go shooting. The tripod base folds up for transport and locks down into 3 positions for flexible configuration. The adjustable rubber tripod feet thread out for leveling adjustment, and spiked feet are also included for added stability on different surfaces. You can mount your camera directly to the flat base for lightweight operation or add your own photo or video head for precise pan/tilt control. Also included with the unit are a soft padded carrying case and removable wrist strap for safe handling.
€ 190.11 incl. VAT
only 2 stock
VariZoom VZT100A video tripod with floor spreader
100mm Aluminum 2-Stage Video Tripod w/ Floor Spreader (includes Carry Case)
€ 258.60 incl. VAT
in stock
VariZoom VZFH100HANDLE Extra Replacement grip for VZFH100
VariZoom VZFH100HANDLE - Handle for the VZFH100 Fluid Head, for use in replacement or a second handle for separate controls.
€ 77.60 incl. VAT
in stock
VariZoom VZFH100 Tripod Head with 100mm halfball connect
VariZoom's new professional 100mm fluid head offers excellent performance and value in an attractive, durable package. With variable drag settings for both pan and tilt, as well as an adjustable counterbalance setting, the FH100 handles cameras up to 22 lbs easily. Available separately or as a kit with one of our four 100mm tripod models.
€ 781.57 incl. VAT
in stock
VariZoom VZTK100A video tripod with fluid head
100mm Tripod/Head Combo with VZ-FH100 Head and VZ-T100A Tripod - Cams up to 15 lbs
This floor-spreader system pairs the T100A tripod with our new FH100 fluid head. A great, lightweight 100mm system, the TK100A is similar to the TK100AM except that it has a floor spreader instead of a mid-level spreader. For those who prefer floor-spreaders, this is the 100mm system to beat. The system is optimized for cameras up to 15 lbs and includes an all-in-one carrying case.
Features:
Legs
-Aluminum Legs
-Lightweight/Compact
-2-stage leg adjustment for compact storage
-Length-adjustable Floor-Spreader for High Stability and Traction
-Compatible with D50 Dolly System
-Padded Carrying Case
Head
-100mm Fluid Head w/ Indexed Quick Release Plate
-Independent Variable Drag Adjustments for Pan and Tilt
-Progressive Counterbalance Adjustment for Heavier Cameras
-Independent Pan and Tilt Locking Levers
-Backlit Leveling Bubble
-Includes 1 Telescoping Pan Handle (2nd-handle accessory available for separate purchase)
€ 894.02 incl. VAT
must be ordered - not in stock
VariZoom VZTC100C video tripod 100mm up to 46Kg
Heavy Duty 100mm Carbon Fiber 2-Stage Video Tripod w/ Mid-Spreader and Carry Case
The TC100C s 2-stage carbon fiber design makes it lighter and more compact than the TC100A, but it is equally stable and rigid. As a more portable solution, the TC100C is perfect for on-the-go shooters with a little extra money to spend. This heavy-duty tripod supports cameras up to 40 lbs, and its 100mm bowl mount will accommodate any industry-standard 100mm fluid head. Padded case included.
Compact but heavy-duty and versatile enough for any camera package up to 40 lbs
2-Stage height adjustment for compact storage
Carbon fiber tubes for low mass & high rigidity
Mid level spreader
Exceptional stability and low deflection
Secure locking height adjustment knobs
Soft rubber feet for indoor or outdoor applications
100mm mounting bowl
• Weight 31 lbs
• Dimensions 43 x 10 x 10 in
• Folded Height 30
• Max./Min. Operating Ht. 57 1/2 / 23
• Recommended Camera Wt. Up to 40 lbs.
• Maximum Static Load 100 lbs
• Unit Weight 18.5 Lbs.
• Bowl Size 100mm
• Material Carbon Fiber
€ 1124.49 incl. VAT
must be ordered - not in stock
VariZoom VZTC100A Video tripod 100mm up to 45Kg
Versatile and well suited for any ENG or HD camera setup.
• Single-stage height adjustment
• Mid-level spreader adjustable by length and angle
• Heavy Duty build for extreme stability, low deflection and durability
• Black Finish
€ 562.23 incl. VAT
in stock
VariZoom VZTK75A-HANDLE extra or replacement handle TK75A
Extra / 2nd Handle for TK75A Tripod Head and Chickenhead
€ 26.48 incl. VAT
must be ordered - not in stock
VariZoom VZTK75A-PLATE Quick release plate for tripod TK75A
Extra Quick Release Plate for TK75A Tripod Head
€ 26.48 incl. VAT
must be ordered - not in stock
VariZoom VZDIGIVIEW DSLR viewfinder 3 inch
DSLR Viewfinder for Canon 5D, 7D & 1D w/ 3x magnification
DSLR view finder for 3 LCD Screens. 3x Magnification with a 2.75 Diopter Correction. High quality coated 40mm lens with oversized eyecup. Includes heavy duty camera base plate with mounting frames for Canon 5D & 7D. For Canon 1D please call!
€ 151.53 incl. VAT
in stock
VariZoom VZP610 big transport pouch
Large Controller Pouch (6 x 10) - For Pro & PG series
€ 14.90 incl. VAT
must be ordered - not in stock
VariZoom VZP54 small transport Bag for controls and cables
Small Controller Pouch (5x4) - For Stealth series Rock series and simlar sized controllers
€ 12.00 incl. VAT
must be ordered - not in stock
VariZoom VZHDARM-K Magic arm Set
Master Kit - VZHDARM-K + Head Bracket + Tripod Base
The new Heavy Duty (HD) Single-Locking Articulated Arm Master Kit adds further versatility to the outstanding HD Arm. The Master Kit includes a rugged tripod base and a beefy head bracket for attaching larger accessories that require lateral support. Perfect for mounting monitors, small lights and small cameras, and capable of easily holding 5 pounds, the HD Arm also boasts a slick locking mechanism that allows you to loosen all three joints with a single lever. The system includes a reversible brass mounting stud with 1/4?-20 and 3/8?-16 ends and our universal clamp for mounting to bars or flat surfaces. The HD Arm Master Kit is robust, easy to use, and incredibly helpful in video, photo, and film applications.
on request
VariZoom VZHDARM very strong magic arm
The new Heavy Duty (HD) Single-Locking Articulated Arm is a really versatile and exciting addition to our line of support accessories. Perfect for mounting monitors or small lights and capable of easily holding 5 pounds, the HD Arm also boasts a slick locking mechanism that allows you to loosen all three joints with a single lever. The system includes a reversible brass mounting stud with 1/4-20 and 3/8-16 ends and our universal clamp for mounting to bars or flat surfaces. This arm is robust, easy to use, and incredibly helpful in video, photo, and film applications.
on request
VariZoom VZSHOE Swivel Shoe Mount
Swivel Shoe Mount for TFT Monitors. Mount on camera flash shoe or every quarter inch thread.
Swivel shoe mount allows mounting of LCD monitors on top of camera for a studio-style external viewfinder, or other accessories to hot/cold shoe mount or to any 1/4?-20 hole.
This little accessory mount goes almost anywhere! Simple,
versatile and durable is the only way to describe this handy tool. The VZ-SHOE has a 1/4?-20 screw on top for attaching your monitor, mic, or other accessories, while the base fits industry standard hot/cold shoe mounts on
all cameras. The unit also includes an additional fitting that allows it to mount to 1/4?-20 holes where no shoe mount is available.
on request
VariZoom VZMICRO-ARM-K VZMICROARMK magic arm
Miniature articulated arm w/ shoe mount, reversible 1/4-20 mount, clamp, and mounting stud.
€ 75.14 incl. VAT
Available soon - please send request for reservation
VariZoom VZDC Deluxe clamp for VariZoom PG Controls
Deluxe Swivel Clamp for VZ-PG-L - Allows replacement of LSP handle with VZ-PG-L
€ 49.66 incl. VAT
in stock
VariZoom VZ-MS-- heavy duty monitor mount
Heavy duty monitor stand for TFT monitors
€ 158.47 incl. VAT
only 2 stock
VariZoom VZ-PGB mount PG controls to camera bottom
Bracket for Pistol Grip
€ 40.26 incl. VAT
in stock
CVC
Bahnhofstraße 62
66629 Freisen
+49 6855 996046 • info@cvc.de
Service-Hotline, Unterstützung und Beratung unter:
+49 6855 996046
Mo-Fr: 09:00-18:00 Uhr
oder per E-Mail an info@cvc.de
Stock at our place in Freisen
Demo and used goods are marked
stock parts order until 11 a.m.
Shipping cost