LINSN TS802 PCI sending card for LED walls
DVI input, 2 network ports, up to 1.31 million pixels
Special price: € 219.00
incl. VAT
( instead of 299.00 )
184.03 € w/o vat
in stock
Shipping costarticle number: 10410 | manufacturer number: TS802
The LINSN TS802, also referred to as TS802D, is a PCI sending card for controlling LINSN LED walls. It is installed in a PC system and converts a DVI video signal into digital LED control signals for compatible LINSN receiver cards. The card is suitable for full-color LED displays as well as single- and dual-color LED displays.
The TS802 features one DVI video input, one audio input, and two network outputs for connecting to LED receiver cards. Each network port supports up to 655,360 pixels. In total, one TS802 sending card can drive up to 1,310,720 pixels, depending on resolution, refresh rate, and the configuration of the LED system.
The LINSN TS802 supports both 60 Hz and 30 Hz output modes. In 60 Hz mode, typical reference resolutions of up to 2048 × 640 pixels are possible. In 30 Hz mode, wider configurations can be achieved, for example up to 4032 × 512 pixels. The actual usable resolution depends on the LED wall, the receiver cards, and the system configuration.
For larger LED walls, multiple TS802 sending cards can be cascaded. According to the manufacturer, up to four cards can be operated together to drive larger display areas. Setup and configuration is carried out via USB using the appropriate LINSN software.
The TS802 supports the transmission of audio data. In addition, manual brightness adjustment is possible when the card is used with a suitable external box. Brightness levels with 16, 32, or 64 steps can be used.
- LINSN LED walls with compatible receiver cards
- Full-color LED displays
- Single- and dual-color LED displays
- Fixed installations with PC-based playback
- Event, trade show, and stage applications
- LED systems with cascaded sending cards
- PCI sending card for LINSN LED walls
- 1 × DVI video input
- 1 × audio input
- 2 × network outputs for LED receiver cards
- up to 655,360 pixels per network port
- up to 1,310,720 pixels total load per card
- USB connection for configuration
- Cascading of up to 4 cards possible
- Supports 60 Hz and 30 Hz output mode
- Supports manual brightness adjustment with a suitable external box
- Suitable for full-color, single-color, and dual-color LED displays
Real product can look different to picture
techn. Specs▲
| Device | Model | LINSN TS802 / TS802D |
|---|---|---|
| Product Type | LED Sending Card / PCI Control Card | |
| System | LINSN LED Control System | |
| Video Input | DVI | 1 × DVI video input |
| Maximum Card Load | up to 1,310,720 pixels | |
| Maximum Width | up to 4032 pixels | |
| Maximum Height | up to 2048 pixels | |
| Output Mode | 60 Hz Mode | supported |
| 30 Hz Mode | supported | |
| Reference Resolution 60 Hz | 2048 × 640, 1920 × 672, 1792 × 720, 1600 × 800, 1472 × 880 | |
| Reference Resolution 30 Hz | 4032 × 512, 3840 × 544, 3584 × 576, 3392 × 608, 3200 × 640 | |
| Note | actual resolution depends on LED wall, receiver cards and configuration | |
| LED Output | Network Outputs | 2 × RJ45 / network outputs |
| Maximum Load per Port | up to 655,360 pixels | |
| Connection | output to compatible LINSN receiver cards | |
| Audio | Input | 1 × audio input |
| Control | PC Connection | USB for configuration |
| Cascading | up to 4 sending cards | |
| Brightness | manual brightness adjustment with suitable external box | |
| Brightness Levels | 16-level, 32-level or 64-level | |
| Display Support | Full Color | supported |
| Single Color | supported | |
| Dual Color | supported | |
| Power | Operating Voltage | 5 V DC |
| Voltage Range | 4.5 – 5.5 V DC | |
| Current Consumption | typical 0.50 A, range approx. 0.46 – 0.57 A | |
| Power Consumption | typical 2.5 W, range approx. 2.1 – 3.1 W | |
| Environment | Operating Temperature | -20 °C to +75 °C |
| Humidity | 0 % to 95 % | |
| Installation | Form Factor | PCI plug-in card |
| Installation | internal installation in PC systems with PCI slot | |
| Scope of Delivery | Accessories | USB cable, DVI/DVI cable |
| Note | scope of delivery may vary depending on supplier or set |
Questions & Answers▲
What type of interface does the LINSN TS802 use to connect to a PC?
The LINSN TS802 is a PCI card that is installed directly into a PCI slot of a PC system. It receives the video signal via a DVI input and outputs digital LED control signals through its two network ports.
How many pixels can the LINSN TS802 drive in total?
The TS802 can drive up to 1,310,720 pixels in total. Each of the two network ports supports up to 655,360 pixels. The actual number of usable pixels depends on the resolution, refresh rate, and overall configuration of the LED system.
What output refresh rates does the TS802 support?
The card supports both 60 Hz and 30 Hz output modes. In 60 Hz mode, resolutions of up to 2048 × 640 pixels are typical. In 30 Hz mode, wider configurations such as 4032 × 512 pixels can be achieved.
Can multiple TS802 cards be used together for larger LED walls?
Yes, up to four TS802 sending cards can be cascaded to drive larger LED display areas. This allows significantly more pixels to be controlled across a single installation.
How is the TS802 configured and set up?
Configuration and setup are carried out via USB using the appropriate LINSN software. The card must be installed in a compatible PC system before software-based configuration can take place.
Is the TS802 compatible with both full-color and single-color LED displays?
Yes, the card is suitable for full-color LED displays as well as single-color and dual-color LED displays, provided they use compatible LINSN receiver cards.
Does the LINSN TS802 support audio transmission?
Yes, the TS802 includes an audio input and supports audio data transmission alongside the video signal.
Is brightness adjustment possible with the TS802?
Manual brightness adjustment is supported when the card is used together with a suitable external box. Brightness can be set in steps of 16, 32, or 64 levels.
What receiver cards are compatible with the TS802?
The TS802 is designed to work with compatible LINSN receiver cards. It is not compatible with receiver cards from other manufacturers, as the communication protocol is specific to the LINSN ecosystem.
Is the TS802 also referred to by another model name?
Yes, the card is also referred to as TS802D. Both names refer to the same product.
For what types of installations is the TS802 intended?
The card is suitable for fixed installations with PC-based video playback, as well as for event, trade show, and stage applications where LED walls are driven from a desktop or server PC.
How many network output ports does the TS802 have?
The TS802 has two network output ports. Both ports are used to connect to LINSN receiver cards and together they cover the full pixel capacity of the card.
documents, files, links▲
linsn-led-controller-ledstudio-install english.pdfproduct safety (GPSR)▲
