Lilliput 15.6 Inch 12G-Sdi 4K Monitor 4 X Hdmi Bm150-12G

Lilliput BM150-12G is a 15.6 inch field monitor with true 4K resolution (3840 x 2160 pixels) featuring a professional 8-bit FRC IPS panel for the best image quality at 330 cd brightness.

According to experts, an 8-bit FRC panel even displays colors/gray scales better than a pure 10-bit panel.

With almost 40cm screen diagonal, 4 x SDi input 4 x HD-SDI Out Loop Through. 3G 12G HD-SDI, DVI and 4 x HDMI IN.

Operates with V-Mount batteries or the included power supply.

Included flight case. This monitor also fits perfectly into any 19 inch rack with 6U.

COMPATIBLE WITH DUAL CHANNEL (3G/6G) AND QUAD CHANNEL (3G) AS WELL AS SINGLE CHANNEL HD-SDI, 3G-SDI, 6G-SDI and 12G-SDI

PROTECTIVE SCREEN available at a small extra charge!

CALIBRATION INCLUDED ONLY WITH US

We are also a Lilliput Service Partner - many spare parts in stock

The monitor can also be directly installed into a 19 inch rack if needed. The monitor occupies 6 height units (HU) and has a width of 483mm - can therefore be integrated into any rack.

Large field monitor with professional connections. Just the right device for all those who find 7-10 inch monitors simply too small in screen diagonal and 23 or 28 inches simply too large. The Lilliput BM150-12G offers a large display diagonal of 39.7cm (15.6 inches) with a very sharp native resolution of 3840x2160 pixels. Thanks to IPS technology, the display not only displays colors well, but is also stable from different viewing angles.

• Professional video monitor for directing, editing, studio or field use
• Bright and sharp display with a 39.7cm diagonal
• True resolution of 3840 x 2160 pixels enables native preview of 4K
• IPS technology ensures good contrasts and colors that are correctly displayed regardless of viewing angle
• Precise calibration possible via RGB controllers
• Almost the entire monitor control is done via the front keyboard
• Video inputs for 4 x HDMI (1 x 4 K or 4 x HD), VGA, DVI, and HD-SDI/SDI In/Out
• HDMI input 1 with HDMI 2.0 are 4K at 25/30/50/60 HZ possible
• HDMI input 2-4 with HDMI 1.4 are 4K at 25/30 Hz possible
• 12G-SDI input 4K at 50/60 Hz
• 6G-SDI input 4K at 25/30 Hz
• 3G-SDI Compatible FullHD (1920x1080) at 50/60 Hz
• Compatible with Single-, Dual- and Quad-Link SDI
• 8-bit FRC color processing (according to manufacturer) - better than 10-bit without FRC
• SDI can be looped through (passthrough)
• Aspect ratio of the image can be set in the device (e.g. for distortion correction in anamorphic cinemascope productions)
• Headphone connection via 3.5mm mini jack
• VESA 100x100 holes for wall mounting on the back
• Operation from the socket or via batteries (Sony V-Mount)
• Tally connection via 9-pin SUB-D

• 19 inch rack flight case with front and rear lid
• Rear lid with pocket for storing accessories
• Front lid for storing the sun visor and/or protective screen
• Power supply, power cable, Powertap to XLR 4Pin cable
• Tally plug (15 pin SubD) for soldering as a kit included
• Base feet for use as a desktop monitor
• Operating instructions
• Screws for mounting the protective screen (pre-assembled)
• Sun visor (Velcro attachment on the flight case)

WARNING: The 12G-SDI input supports resolutions up to 4K at 50/60 Hz. The 4K resolutions are available on all HDMI inputs. HDMI input 1 supports 4K 50/60 Hz, all others 25/30 Hz

• 1 input as full screen
• 2 inputs left / right
• 2 inputs top / bottom
• 2 inputs picture in picture
• 4 inputs quadview