Lilliput 719H/T 7 inch IP65 touch monitor

The Lilliput 719H/T is a compact 7-inch industrial touch monitor with a capacitive 10-point touchscreen and IP65-protected housing. With 1000 cd/m² screen brightness, it is suited for interactive industrial control and visualization applications in demanding environmental conditions.

The LCD panel has a native resolution of 1280 × 800 pixels in 16:10 format. A contrast ratio of 800:1 and viewing angles of 170° horizontal and vertical support clear display of operator interfaces, process data, and technical information.

The combination of bright display, touch operation, and protected housing makes the 719H/T a compact solution for industrial HMI systems.

The integrated PCAP touchscreen supports up to ten simultaneous touch points, allowing graphical operator interfaces to be controlled directly on the monitor.

According to the manufacturer, the touch technology also supports operation with wet hands and suitable protective gloves, such as rubber, latex, or PVC. Actual performance depends on the specific glove type and environmental conditions.

The touch monitor is therefore suited for machine operator stations, industrial control terminals, and visualization systems where direct operation is required even under difficult conditions.

The Lilliput 719H/T features an IP65-protected housing designed to provide protection against dust and water jets, distinguishing it clearly from the standard model 719/T, which has no specified IP protection rating.

The connection solution includes a protected cable entry for HDMI, USB touch, and DC power supply, allowing the device to be integrated into suitably designed industrial installations.

Important: The protective effect requires proper installation and suitable external connectors. The IP65 rating does not imply suitability for permanent submersion.

With a screen brightness of 1000 Nits, the Lilliput 719H/T provides good readability in high ambient light conditions.

The automatic brightness control (Auto Dimming) adjusts the display brightness to the prevailing lighting conditions. The LED backlight is specified for a lifespan of 50,000 hours.

This makes the monitor suitable for technical operator stations and appropriately protected outdoor installations with changing lighting conditions.

The 719H/T uses an HDMI input for video signals and a separate USB connection for the touch function.

HDMI supports input signals up to 3840 × 2160 at 30 Hz. The image is scaled to the native screen resolution of 1280 × 800 pixels.

Touch data is transmitted via a USB Type-A connection, which is used exclusively for touch control and not for video transmission.

Unlike the standard model 719/T, the 719H/T has neither a VGA input nor a USB-C video input.

Power is supplied via DC 9 to 36 V. Maximum power consumption is 8.5 W at 12 V. The specified operating temperature range extends from -20 °C to +60 °C.

Weighing approximately 560 g and measuring 184.5 × 118.8 × 32 mm, the monitor can be integrated into compact industrial operator stations.

A VESA 75 mm mount is available as optional accessory.

• 7 inch industrial touch monitor with IP65 protective housing
• Capacitive 10-point PCAP touchscreen
• Touch operation with suitable protective gloves
• 1000 cd/m² high-brightness display
• 1280 × 800 pixels in 16:10 format
• Contrast ratio 800:1
• 170° viewing angle horizontal and vertical
• Automatic brightness control
• HDMI input up to 3840 × 2160p30
• Separate USB-A connection for touch data
• Protected cable entry
• No VGA or USB-C video input
• One integrated speaker per device specification
• 50,000 hours LED lifespan
• DC 9–36 V, maximum 8.5 W at 12 V
• Operating temperature -20 °C to +60 °C
• VESA 75 mm mount available as optional accessory
• Weight approx. 560 g