DVTEC Metal Collar Clamp 16 mm to 13 mm
Short-style aluminium die-cast clamp for rig systems
No returned or B-stock items sold as new
One contact who knows the equipment
Not left alone if a defect occurs
Full input-tax deduction for business customers
article number: 12705 | manufacturer number: 13-16CollarKurz
This DVTEC metal locking clamp serves as a spare part for selected DVTEC camera support systems with hip support. It connects components with 16 mm and 12.7 or 13 mm diameter and is intended for systems that require the short older clamp design.
The clamp is suitable for repairing, replacing, or retrofitting existing DVTEC rig systems where a matching metal locking clamp in the 16-to-12.7/13-mm version is required.
- DVTEC EngRig
- DVTEC JuniorRig
- DVTEC MultiRig
- DVTEC DVRigPro
Real product can look different to picture
techn. Specs▲
| Product Type | Metal locking clamp / reducing clamp |
|---|---|
| Compatibility | DVTEC support systems with matching 16-mm / 12.7-mm or 13-mm socket |
| Socket / Reduction | 16 mm to 12.7 mm or 13 mm |
| Design | Short, older design |
| Material | Die-cast aluminium |
Questions & Answers▲
What does this clamp actually do?
It connects components with different tube diameters within a rig system, specifically reducing a 16 mm socket down to 12.7 mm or 13 mm. This allows two sections of a camera support rig with mismatched diameters to be joined securely.
Which DVTEC rig systems is this clamp compatible with?
It is compatible with the DVTEC EngRig, JuniorRig, MultiRig, and DVRigPro. These are all support systems that use hip support configurations requiring this specific clamp size and design.
What material is the clamp made from?
The clamp is made from die-cast aluminium, which offers a solid and durable construction suitable for camera support applications while keeping weight relatively low.
Is this clamp a spare part or does it come included with a rig?
This is a standalone spare part intended for repairing, replacing, or retrofitting existing compatible DVTEC rig systems. It is not bundled with any complete rig package.
What does the short design refer to?
The short design refers to an older legacy form factor used in earlier DVTEC rig generations. If your system originally used this shorter clamp style, this part is the correct replacement. Newer or longer clamp variants are not interchangeable with this design.
Can this clamp be used with third-party or non-DVTEC rigs?
It is designed and specified for use with compatible DVTEC support systems. Whether it fits a third-party rig depends entirely on whether that rig uses the same 16 mm to 12.7 mm or 13 mm socket dimensions and accepts the short clamp form factor. No compatibility with non-DVTEC systems is stated or guaranteed.
Does the clamp fit both 12.7 mm and 13 mm tubes?
Yes, the reduction side of the clamp accommodates both 12.7 mm and 13 mm diameters. This dual compatibility covers slight diameter variations found across different generations or regional versions of the supported rig systems.
How do I know if my rig needs the short design or a longer version?
You can check the original clamp currently installed on your rig and compare its length. If your system is one of the compatible models and was produced with the older short-style clamp, this part is the correct replacement. When in doubt, contacting DVTEC support with your rig model and serial number is recommended.
Is this clamp suitable for a retrofit, or only for direct replacement?
It can be used for both purposes. In addition to replacing a worn or damaged clamp, it can also be used to retrofit a compatible rig system that previously lacked this connecting component, provided the system accepts the 16 mm to 12.7 or 13 mm short-style clamp.
Does the clamp include any additional hardware such as screws or locking bolts?
No additional hardware is specified for this part. It is listed as a single metal locking clamp. If your replacement requires additional fasteners, those would need to be sourced separately or confirmed with the supplier.
product safety (GPSR)▲