NOVASTAR MCTRL660 LED Wall Controller
new
Nova MCTRL660 for NOVA LED Screens
*** *** html
The Novastar MCTRL660 LED display controller is used to control NOVA LED screens. With this controller all NovaStar supported LED walls can be programmed without a PC.
The MCTRL 660 has a DVI and HDMI input. Both inputs are output next to the outputs to the LED-WALL (RJ45 network connections) as DVI and HDMI again 1: 1 to supply additional controllers with the same signal.
The MCTRL can also program a complete wall without a PC. For this purpose, the data of the receiving cards are loaded into the controller with the aid of the supplied control software and can then be retrieved from there.
The controller for loading the settings is connected via USB.
The controller offers four RJ45 signal outputs for controlling up to four LED walls.
If an automatic brightness control is desired, you can fall back on the NovaStar multifunction box MFN300-B.
Properties:
Power supply 100-240V
Four RJ45 LED WALL outputs
LED wall programming / addressing without PC possible -> set number of modules, columns and rows and write in the wall - special forms only with the supplied NovaStar software.
Real product can look different to picture
Detailed description:
*** *** html
The Novastar MCTRL660 LED display controller is used to control NOVA LED screens. With this controller all NovaStar supported LED walls can be programmed without a PC.
The MCTRL 660 has a DVI and HDMI input. Both inputs are output next to the outputs to the LED-WALL (RJ45 network connections) as DVI and HDMI again 1: 1 to supply additional controllers with the same signal.
The MCTRL can also program a complete wall without a PC. For this purpose, the data of the receiving cards are loaded into the controller with the aid of the supplied control software and can then be retrieved from there.
The controller for loading the settings is connected via USB.
The controller offers four RJ45 signal outputs for controlling up to four LED walls.
If an automatic brightness control is desired, you can fall back on the NovaStar multifunction box MFN300-B.
Properties:
Power supply 100-240V
Four RJ45 LED WALL outputs
LED wall programming / addressing without PC possible -> set number of modules, columns and rows and write in the wall - special forms only with the supplied NovaStar software.
Real product can look different to picture
LED Modul-Anschluss
• 4x RJ 45 female
Videoeingang-Anschluss
• 1x DVI-D female (DVI)
• 1x HDMI female (HDMI)
Videoausgang-Anschluss
• 1x DVI-D female (DVI)
• 1x HDMI female (HDMI)
• USB-Anschluss ( USB-B )
• Netzwerk-Anschluss ( RJ-45 zu den Wänden )
Technische Daten
• Internes Netzteil
• LCD Display
• Netzspannung 100-240 V, 50/60 Hz
• Stromaufnahme 1,1 A bei 230 V
• Metallgehäuse aus Aluminium, schwarz eloxiert
• Gehäuse-Schutzklasse IP 20
Abmessungen / Gewicht
• Maße (L x B x H) 48,0 x 25 x 6,7 cm -> Entspricht 19 Zoll 1.5HE
• Gewicht 2,8 kg
Verwendbar als Desktop oder 19 Zoll Gerät
direct buy accessoires
▲
similar product
NOVASTAR MCTRL300 LED Wall Controller
NovaStar M3 MCTRL300 is the standard model of Nova controller. Nova LED Display Sending Unit MCTRL300 has the same characteristics as sending card MSD300, as follows:
• 1 DVI video input
• 1 audio input
• 2 Ethernet port output
...
details
NOVASTAR MCTRL4K LED Wall Controller
Overview
MCTRL4K is an independent master controller developed by NovaStar with an epoch-making significance. The loading capacity of a single unit is up to 3840x2160@60Hz, which is able to meet the on-site requirements of oversized LED ...
details
NOVASTAR VX4S LED Wall Steuerung and Scaler All in One
1) The inputs of the VX4S include CVBSa1c1 2, VGAa1c1 2, DVIa1c1 1, HDMIa1c1 1 , DPa1c1 1 and SDIa1c1 1. They support input resolution up to 1920a1c1 1200@60Hz; the input images of VX4S can be zoomed point-to-point according to the screen resolut ...
details
fitting products
NOVASTAR MSD300 Sending Card
The Novastar (MSD300) Sending Card for LED Display is the most advanced Controller Board with best picture quality. The MSD300 is standard PCI card with DVI Input and Network RJ45 Connector Output to LED Screen.
See technical information f ...
details
