to shopping cart

www.cvc.de

KameraKran VariZoom

VariZoom SOLO JIB AL - lightweight aluminium jib

VariZoom SOLO JIB AL - lightweight aluminium jib

€ 436.08 incl. VAT

available from stock

VariZoom SOLO SLIDER DOLLY - camera dolly

VariZoom SOLO SLIDER DOLLY - camera dolly

The Solo Slider Dolly is a one-of-a-kind system the combines all the benefits of a track dolly with the portable, flexible nature of a slider system. The system will accommodate nearly any tripod from a heavy-duty 100mm unit down to a mini tripod / hi hat, and the track system sets up in 5 increments up to 16 ft. The specially designed wheels enable smooth and completely silent operation, and the included underpadding allows you to set up the track on nearly any surface, including grass, gravel, carpet, tile, etc. The Solo Slider Dolly eliminates the need for a separate dolly and slider by combining the functions of both into one device, and the entire system fits into a single compact carrying case. Add a VZTK75A and/or a Solo Jib for greatly expanded capability.

There's no need to buy a one-dimensional slider when you can get VariZoom's Solo Slider Dolly, a system that offers much greater length and height capability, as well as the flexibility of adding a VZTK75A tripod and Solo Jib for a kit price that is lower than the cost of many slider systems. The Solo Slider Dolly sets up in minutes with no tools, and it allows you to achieve tracking shots with up to 13.5 feet of travel (at 16 ft track length). Because the dolly has adjustable tripod mounting brackets, you can run the system inches off the ground with a mini tripod, low-profile on a broad countertop, or at any height up to the maximum your tripod allows.Whether you're following talent, tracking sports on the sideline, or simply adding motion to stir up your scenes, the Solo Slider Dolly has you covered. The entire system fits into a custom case with a total weight of only 26 lbs. Watch our video for a few examples of how to use this high-value system to improve your productions.

€ 743.45 incl. VAT

VariZoom SOLO SLIDER DOLLY KIT - camera Dolly with tripod

VariZoom SOLO SLIDER DOLLY KIT - camera Dolly with tripod

This kit adds the popular VZTK75A tripod system to the the Solo Slider Dolly, a one-of-a-kind system the combines all the benefits of a track dolly with the portable, flexible nature of a slider system. The kit gives you a turnkey system for fluid pan/tilt/tracking shots at a height range of 33" to 67", and the track sets up in 5 increments up to 16 ft. The specially designed wheels enable smooth and completely silent operation, and the included underpadding allows you to set up the track on nearly any surface, including grass, gravel, carpet, tile, etc. The Solo Slider Dolly eliminates the need for a separate dolly and slider by combining the functions of both into one device, and the entire system fits into 2 compact carrying cases.

Solo Slider Dolly - There's no need to buy a one-dimensional slider when you can get VariZoom's Solo Slider Dolly Kit, a system that offers much greater length and height capability, as well as the flexibility of adding a Solo Jib for a kit price that is lower than the cost of many slider systems. The Solo Slider Dolly sets up in minutes with no tools, and it allows you to achieve tracking shots with up to 13.5 feet of travel (at 16 ft track length). Because the dolly has adjustable tripod mounting brackets, you can run the system inches off the ground with a mini tripod, low-profile on a broad countertop, or at any height up to 67" (using the VZ-TK75A).Whether you're following talent, tracking sports on the sideline, or simply adding motion to stir up your scenes, the Solo Slider Dolly Kit has you covered. The Solo Slider Dolly system fits into a custom case with a total weight of only 26 lbs. Watch our video for a few examples of how to use this high-value system to improve your productions.

VZ-TK75A - This lightweight, affordable tripod system is our biggest seller for a reason. Combining value with a strong feature set and high-grade construction, the TK75A is an excellent choice for any compact video or HDSLR shooter. With its ball-leveling fluid head, padded carrying case, 2-stage adjustment for compact storage & extra-tall max height, the TK75A is not just a good deal, it's a great video tripod. System includes tripod legs, fluid head w/ quick-release plate, telescoping pan handle, and padded carrying case.

Ball-leveling system (65/75mm hybrid)
Fluid Head w/ adjustable tilt drag and quick release plate
2-Stage height adjustment
Mid level spreader
Built in bubble for leveling
Switchable Rubber/Spiked feet
Dual handle capability (w/ optional 2nd-handle accessory)

€ 930.88 incl. VAT

will be ordered

VariZoom VZCINEMAPRO-K2 Remote Head w/ PanBar

VariZoom VZCINEMAPRO-K2 Remote Head w/ PanBar

Now available - Stabilization / Backpan upgrade.Designed and built by Academy Award winning motion picture engineers, the Cinema Pro has been chosen by DPs and producers around the world for its smoothness, stability, and versatile feature set. In production for many years now, the Cinema Pro is extremely reliable, easy to set up and operate, and capable of imperceptibly slow or lightning fast moves with no sacrifice in stability. With an impressive set of standard features and a proud pedigree, it outperforms the competition at a fraction of the price and works with a huge range of film and video cameras.

The Cinema Pro-K2 pan bars kit is popular with broadcast operators, sports cameramen, and videographers. The pan bars are great for tracking shots and easier to learn than the hand wheels, so those relatively new to motion control often gravitate toward the pan bars option. The pan bars offer scalable speed so the head's range of motion can be customized relative to the motion of the pan bars. The zoom & focus hand controls on the pan bars enable seamless single-operator remote camera control. The pan bars are slaved to the advanced console, which features a superb 3-axis joystick with customizable response for pan/tilt/zoom, oversize control knobs for focus and menu adjustment, backlit keypad, and a whole host of parametric menu settings and interface options. The system is compatible with virtual set software, motion data import/export, and is capable of controlling servo lenses directly or can be integrated seamlessly with our TOC external lens drive motor system.

The Cinema Pro is used on a regular basis by crane & jib operators, visual effects studios, sports & racing productions, and feature film crews worldwide. Available with a wide array of options for camera control, mounting hardware, and even wireless up to 1 mile, the Cinema Pro is the ultimate in affordable true motion control heads, with superb mechanical stability and frame-accurate, recordable 5-channel control for absolutely precise repeatable motion control sequences. If you have any questions, please email or call us, or you can visit one of our demo/rental outlets for a hands-on experience.

Features
-Joystick control for Pan/Tilt/Zoom, separate Knob for Focus
-Record and move to up to 2000 marked positions
-Record and playback 1 hour and up to 2000 takes
-Share recorded data w/ laptop: upload/download
-Programmable max. speeds for individual motors
-Programmable smoothing controls for each motor
-Precise homing control via pushbutton commands
-2500' max std extension, longer w/ fiber optic option
-Wireless Option available
-Programmable motion limits for both pan & tilt
-Servo tuning available at Full Function Remote
-Fuji/Canon/Preston serial & analog lens control
-Zoom Compensation for smooth moves at telephoto
-Camera sync. feature for frame-accurate shots
-Advanced Intervalometer provides 3 modes for stretching moves in time
-Extremely rigid for smooth motion @ telephoto
-Full slip rings for continuous 360 degree motion
-Now Available: Optional HD Video slip rings for pan and tilt.

The Advanced Controller, aka 'Full Function Remote,' is the brains of the system that contains all the parametric motion control and recording capabilities, as well as an LCD readout, connector panel, pan/tilt joystick, and zoom/focus controls. The Advanced Controller can be used stand-alone for desktop/tripod operations or paired with optional Control Input Units.

The Optional Pan-bars and Hand-wheels Control Input Units must be used in conjunction with the Advanced Controller.

Demo & Rental Showrooms
VariZoom HQ - Austin TX (512) 219-7722
CVC - Freisen, Germany - 00496855 996046


Cinema Pro Kits
VZCinemaPro-K2

This kit includes:
The Cinema Pro Remote Head
The Pan-bars Unit w/ zoom/reset & focus hand controls, Advanced Control Console
Power Supply w/ 30' XLR Extension Cable
50' Communication Cable
Hard Travel Case
*Reset control allows you to reposition the pan bars without moving the head*

€ 34360.00 incl. VAT

VariZoom VZQJ2K-CPJ Camera Jib with Cinema Jr Remotehead

VariZoom VZQJ2K-CPJ Camera Jib with Cinema Jr Remotehead


VZQJ2K-CPJ Quick Jib Camera Crane + CinemaProJR-K4 remote head - VariZoom's QuickJib represents the perfect balance of quality and economy in a well thought-out design. This is the answer for those who love all of the options of the SnapCrane, but aren't ready to spend that much. The Quick Jib gives you many of the features of the Snap Crane at a more affordable price. With the Quick Jib you get an economical, but secure captive clamp system for extending the jib, along with lanyard-attached stainless aircraft pins for quick assembly. The QuickJib is a professional, tool-free jib arm that assembles rapidly and safely. The QuickJib, like all of our products, was designed for years of trouble-free, reliable operation in the field. With attention to every detail, we have created a tool that will last generations with proper care.

CinemaPro Jr Remote Head w/ Deluxe Pro Joystick Controller

With our ergonomic Jibstick Pro controller, the Cinema Pro JR-K4 offers high-performance pan/tilt/zoom/focus in an incredibly user-friendly package. With all the speed and stability of the advanced motion control kits, but no menus or complex settings, and far fewer buttons and options, the Cinema Pro JR-K4 goes to work with minimal training and setup. At only 13 pounds, the CP Jr is ideal for cranes and portable remote applications, and its superior programming capability and rock-solid electromechanical performance make it a perfect upgrade for the low-tech heads found on most jib systems. The enclosed, slip-ring based drivetrain provides no-maintenance, reliable performance in nearly any environment. The K4 control offers a professional long-throw joystick mounted in a palmrest housing, on-the-fly custom motion limits, integral lens control via plug-in pistol-grip zoom/focus remote, speed & smoothing control, motor disable, pan/tilt/zoom/focus direction switches, & USB interface for advanced setup and firmware updates. This kit includes CP Jr head, Jibstick Pro, plug-in zoom/focus control, 50' control cable, AC adapter, 30' XLR power extension, waterproof hard carrying case.

-Professional Long-Throw Joystick for Pan & Tilt
-Included plug-in hand control for zoom & focus
-Independent speed control for pan & tilt
-Smoothing control for pan & tilt
-Set independent motion limits for pan and tilt to limit rotation, preset location marks, or lock position
-Motor disable switch
-Motor direction switch for pan/tilt/zoom/focus
-USB interface for firmware updates and PC-compatible GUI control panel
-GUI control panel allows setup of lens parameters, joystick deadband, and other advanced features
-2500' max std extension, longer w/ fiber optic option
-Wireless Option available
-Built-In Lens control for Fuji/Canon/Preston
-Extremely rigid for smooth motion @ telephoto
-Also compatible with TOC lens control systems
-Extremely Rigid Build w/ 100mm or Mitchell Mount
-Pan-base slip-ring for continuous 360° motion
-High-power Enclosed Drivetrain Allows Dynamic Moves
-System can be upgraded with Advanced Console for additional features


Jib Arm - The QuickJib selectively uses industrial powder coating and anodizing for durable cosmetics, with stainless steel fasteners throughout. The slim QuickJib outperforms the competition by having less air resistance in breezy conditions than jibs utilizing a four-arm support system (never use in high-wind conditions). The QuickJib will mount to any 100mm tripod, although we recommend only using non-telescoping legs for safety.

Additionally, our quick extension kit attaches in minutes with absolutely no tools, as opposed to more cumbersome systems that require multiple tools and bolts to attach their extensions. The extension kit mates to the standard QuickJib with our Captive Clamp Joint system, which uses two ergonomic, high-torque hand knobs to compress the captive clamps, assuring the joint is rock solid.

Brake System - VariZoom's Brake system utilizes a heavy-duty plate that is securely mounted to the pivot section. Brake compression system is built into the left stator of the pan/tilt base and designed to add significant variable drag, but forgiving enough to slide under extreme force that could otherwise topple a locking-brake jib system.
Locking Pins - Locking stainless aircraft pins of high quality and strength are used at the pivot points, and they are attached by lanyard to prevent them from ever being lost.


Tilting Mechanisms - Camera platform and tilt base join to the jib arm with stainless aircraft pins that insert through sealed radial ball bearings at the tilt base and high-performance sleeve bearings at the camera platform, resulting in silent, smooth motion. The camera platform also has a built-in spirit level for quick reference and adjustment.
Telescoping Counterweight Section - Telescoping weight arm adjusts up to 3 feet for tremendous flexibility. Extend the arm to reduce the amount of weight needed, shorten it to work in tighter spaces, or simply adjust it to fine-tune the counterbalance.

DCR100 Dolly - Our heavy-duty dolly has an ample spread and a positive leg-locking system that securely captures our TCR100 crane tripod.

TCR100 Crane Tripod - Our custom-built crane tripod is the only tripod we recommend for use with any crane, no matter the brand. We recommend you never use a telescoping or collapsible tripod under a crane, no matter how small. When supporting an expensive camera on a jib elevated above other valuable equipment or people, it is simply a no-brainer to eliminate all risk and use a single-section tripod instead of a telescoping type.
The TCR100 crane tripod is machined and built in-house and specifically designed to be used in combination with the DCR100 dolly. Safety & strength are top priorities: the TCR100 uses a solid machined (not molded) base-plate and fittings for strength and precision, specialty heavy-gauge tubing, and oversize leveling feet for an ultra-stable design that will never falter or fail when used properly with the DCR100 dolly.

VariZoom jibs are professional tools with quick setup, long-term reliability, and outstanding performance. Look closely to see the finer details of our thoughtful design, including tool-free assembly and stainless quick-release pins attached by lanyard so they'll never be lost. Scroll down to see how VariZoom takes your investment seriously.

New: The QuickJib comes with VariZoom's new lightweight, thickly-padded Soft Case. This heavy-duty case can also be purchased separately, and can be used for other jibs. Exterior 59"x12"x11"; Interior 58"x11"x10"; Weight 4.9 lbs. Hard Case is an optional upgrade (63"x15", 20.5 lbs.)

€ 13682.02 incl. VAT

will be ordered

VariZoom VZQUICKJIB camera Jib Arm for camera up to 23 Kg

VariZoom VZQUICKJIB camera Jib Arm for camera up to 23 Kg

Quick Jib Small Configuration (Jib Only)
The QuickJib (jib only) is our new low-cost, high-performance jib for cameras up to 50lbs. Easy to assemble in two different lengths, this compact and portable unit is ideal for indoor, outdoor, and studio applications at any budget.

VariZoom's QuickJib represents the perfect balance of quality and economy in a well thought-out design. This is the answer for those who love all of the options of the SnapCrane, but aren't ready to spend that much. The Quick Jib gives you many of the features of the Snap Crane at a more affordable price. With the Quick Jib you get an economical, but secure captive clamp system for extending the jib, along with lanyard-attached stainless aircraft pins for quick assembly. The QuickJib is a professional, tool-free jib arm that assembles rapidly and safely. The QuickJib, like all of our products, was designed for years of trouble-free, reliable operation in the field. With attention to every detail, we have created a tool that will last generations with proper care.

Starting with the simplest package (jib only) up to our complete system (recommended), which includes dolly and tripod legs, you'll see that we consider safety to be the highest priority.

Jib Arm - The QuickJib selectively uses industrial powder coating and anodizing for durable cosmetics, with stainless steel fasteners throughout. The slim QuickJib outperforms the competition by having less air resistance in breezy conditions than jibs utilizing a four-arm support system (never use in high-wind conditions). The QuickJib will mount to any 100mm tripod, although we recommend only using non-telescoping legs for safety.

Additionally, our quick extension kit attaches in minutes with absolutely no tools, as opposed to more cumbersome systems that require multiple tools and bolts to attach their extensions. The extension kit mates to the standard QuickJib with our Captive Clamp Joint system, which uses two ergonomic, high-torque hand knobs to compress the captive clamps, assuring the joint is rock solid.

Brake System - VariZoom's Brake system utilizes a heavy-duty plate that is securely mounted to the pivot section. Brake compression system is built into the left stator of the pan/tilt base and designed to add significant variable drag, but forgiving enough to slide under extreme force that could otherwise topple a locking-brake jib system.
Locking Pins - Locking stainless aircraft pins of high quality and strength are used at the pivot points, and they are attached by lanyard to prevent them from ever being lost.


Tilting Mechanisms - Camera platform and tilt base join to the jib arm with stainless aircraft pins that insert through sealed radial ball bearings at the tilt base and high-performance sleeve bearings at the camera platform, resulting in silent, smooth motion. The camera platform also has a built-in spirit level for quick reference and adjustment.
Telescoping Counterweight Section - Telescoping weight arm adjusts up to 3 feet for tremendous flexibility. Extend the arm to reduce the amount of weight needed, shorten it to work in tighter spaces, or simply adjust it to fine-tune the counterbalance.

DCR100 Dolly (optional, not included with this kit) - Our heavy-duty dolly has an ample spread and a positive leg-locking system that securely captures our TCR100 crane tripod.

TCR100 Crane Tripod (optional, not included with this kit) - Our custom-built crane tripod is the only tripod we recommend for use with any crane, no matter the brand. We recommend you never use a telescoping or collapsible tripod under a crane, no matter how small. When supporting an expensive camera on a jib elevated above other valuable equipment or people, it is simply a no-brainer to eliminate all risk and use a single-section tripod instead of a telescoping type.
The TCR100 crane tripod is machined and built in-house and specifically designed to be used in combination with the DCR100 dolly. Safety & strength are top priorities: the TCR100 uses a solid machined (not molded) base-plate and fittings for strength and precision, specialty heavy-gauge tubing, and oversize leveling feet for an ultra-stable design that will never falter or fail when used properly with the DCR100 dolly.

VariZoom jibs are professional tools with quick setup, long-term reliability, and outstanding performance. Look closely to see the finer details of our thoughtful design, including tool-free assembly and stainless quick-release pins attached by lanyard so they'll never be lost. Scroll down to see how VariZoom takes your investment seriously.

New: The QuickJib comes with VariZoom's new lightweight, thickly-padded Soft Case. This heavy-duty case can also be purchased separately, and can be used for other jibs. Exterior 59"x12"x11"; Interior 58"x11"x10"; Weight 4.9 lbs. Hard Case is an optional upgrade (63"x15", 20.5 lbs.)

€ 1748.05 incl. VAT

VariZoom VZSNAPCRANE12 camera crane jib 4 Meter

VariZoom VZSNAPCRANE12 camera crane jib 4 Meter

VariZoom's incredibly versatile SnapCrane is in a class by itself with our fast yet secure dovetail joint assembly, compact modular design allowing 4 different lengths, and painstaking quality control - no expense was spared. The SnapCrane was designed for years of trouble-free operation and it has the fastest tool-free setup and longest reach of any crane in its price category. Proudly manufactured in Austin, TX with attention to every detail, the SnapCrane is a truly professional tool that will last generations with proper care. Every SnapCrane kit includes the dolly, tripod, and carrying case so you get a turnkey system that's been matched, assembled, and functionally tested prior to shipment. Quality, performance, and safety are all taken very seriously with the SnapCrane, so we make no compromises in materials or labor. There are less expensive systems on the market, but none of them come close to the build quality or versatility of the SnapCrane. Jib Arm / Crane Body - Crane sections made from stiff, lightweight tubing are precision machined and powder coated before assembly and quality inspection. The upper extension section has a truss pattern cut into the sidewalls to retain strength while minimizing weight and reducing air resistance in light breezes (caution: never use a camera crane in windy conditions). The heavily reinforced, cable-tensioned design of the SnapCrane allows it to reach farther and higher without any sacrifice in stability or performance. Pan/Tilt Base & Brake System - Our ultra-smooth, high-capacity pan/tilt base is built to exacting standards with oversize fasteners, sealed bearings, and beefy construction for a remarkably stable fulcrum point. Superior design, proud craftsmanship, and the finest components set this pan/tilt base apart from those used in other crane systems (it's also a significant upgrade over the QuickJib's). Our brake system utilizes a heavy-duty plate on the crane pivot section and a variable drag mechanism built into the right stator of the pan/tilt base. This system was designed to add significant variable drag and hold any position, but it's forgiving enough to slide under extreme force that could otherwise topple a jib with a locking-brake system. Machined Dovetail Joints - Dovetail joint assembly allows for quick, extremely secure no-tools connection with redundant safety locks. A hefty stainless steel latch (w/ internal safety catch) clamps the joint from above while a secondary thumbscrew assures a tight and secure fit from below. Deluxe Quick-Release Pins - Locking stainless aircraft pins of the highest quality and strength are used at the pivot points, and they are attached by lanyard to prevent them from ever being lost. These button-release, t-handle pins are simply the best available, and they represent an upgrade over those used on the QuickJib. Cables and Couplings - Our modular cable system boosts crane stability and ridigity while keeping overall weight down by allowing us to use a single line of compact, lightweight tubing for the main arm. The superior-quality cable tensioning system keeps the SnapCrane taut, rock solid, and easy to control. The smooth-coated, corrosion resistant cables are easy to handle and will last a lifetime. Marine-grade stainless steel hardware is used exclusively throughout the SnapCrane, ensuring long-term field reliability. Crane Case - Comes standard with VariZoom's new lightweight, heavy-duty Soft Case (hard case optional). This case has three reinforced handles (middle and both ends) along with a hefty shoulder strap, thick padding, and rubber feet. It can be used for other jibs, as well. Interior approx. 58"x11"x10"; Exterior 59"x12"x11"; Weight 4.9 lbs. Also available for purchase is the optional rolling hard case, for the ultimate in protected transport. Optional Hard Case: Exterior 63" x 15" (round); Interior 58" x 12" (round); Weight 20.5 lbs. DCR100 Dolly - Our heavy-duty dolly has an ample spread, rugged solid-rubber wheels, foot brakes, and a positive leg-locking system that securely captures our TCR100 crane tripod. Includes padded carrying case. TCR100 Crane Tripod - Our custom TCR100 is the only tripod we recommend for use with any crane, no matter the brand. We recommend you never use a telescoping or collapsible tripod under a crane, no matter how small. When supporting an expensive camera on a jib elevated above other valuable equipment or people, it is simply a no-brainer to eliminate all risk and use a single-section tripod instead of a telescoping type. The TCR100 is designed specifically to be used with our DCR100 dolly. Safety and strength are top priorities: the TCR100 uses a solid machined baseplate (not molded), specialty heavy-gauge tubing, and oversize leveling feet for an ultra-stable design that will never falter or fail when used properly with the DCR100 dolly. With anodized aluminum, stainless steel fasteners and solid brass bushings, the TCR100 will last a lifetime.
• • 12' Film & Video Crane incl. VZTCR100 Tripod & VZD100 Dolly
• Standard Crane Configuration - 14'3" Max Cam Ht. / 12'6" Vertical Movement
• Possible to build 3 length configurations
• TCR100 Tripod
• Custom Free-Wheel Dolly
• Crane Soft Case - Soft Case for easy, protected transport

For questions about the System give us a call 0049 6855 996046 or send us an email to info@cvc.de

€ 7640.26 incl. VAT